similar to: Call(out) routing

Good day all I added the music on hold entry in vpb.conf and commented out default line in musiconhold.conf. Asterisk starts up with the default mp3 but as soon as I remove it and add my mp3 it just doenst start up and gives a broken pipe error? Please Help or advice Thanks ALtus

Good day all I'm still struggling with getting asterisk to hangup. If I make a call out threw my vpb pstn and the person on the other line hangs up 1ste it still shows the line is busy!Only after I hanged up it will show its still open? Why? Please le me know Thanks Altus

Good day all I'm using sip protocol and a openline4 card.If I dial out of the pstn and hangup a answered call it does not disconnect the connection.It shows there is still a call on the external phone I called but on my side its says i'm not connected.We are using x-ten soft phones Can someone please help me Thanks Altus

Good day all I'm totally lost with this caller id,so can someone please help me We are using a openline 4 card so in my vpb.conf I added callerid = on And we are using sip as protocol so in sip.conf. No each time a call comes in from the outside I dont se the number where its coming from on my phone? I think I'm missing something?Please help Thanks Altus

Good day all We have a voicetronix openline4 card If someone calls in from the outside the pstn and into the system and hangsup asterisk does not deteck the hangup any Idea why please Help Altus

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event [12=>[11] Tone detect:GRUNT event [2=>[11] Dial

Hi we've got Asterisk CVS-HEAD 18-Aug-04 (modified by Voicetronix as available on their site for use with the vpb driver) and an OpenLine4 (4xFXO). The same server also has two X100P. Calls on the Voicetronix card drop instantly when the called party picks up. The vpb driver reports that it detected a hangup (loop drop) yet there is no hangup when connecting the X100Ps or analog phones to

Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do i ignore some setting for VoiceTronix OpenSwitch12

I am a serious Asterisk newbie: just installed asterisk last week and it is now running with our Voicetronix OpenLine4 hardware. All is working as expected with one exception, in the following sequence (extracted from my extensions.conf file): [GetConfirmation] exten => s,n,SetVar(TimeOut=0) ; if timeout and TimeOut=1 then user already timed out once, so hangup exten =>

Hi, I am fairly new to asterisk. I am currently testing my first setup. I've been able to debug most of the problems to make asterisk work with my hardware setup until this time. Currently I have the following issue: Voicemail is running but when I test to leave a voicemail thru my incoming PSTN channel (voicetronix / vpb), asterisk will not detect sound (according to the log) on that

Hello all, We had an experimental system which works on OpenLine4 telephony card and Asterisk 1.0.9. Customer asked to upgrade Asterisk to 1.4, then we found our problem: At first Asterisk 1.4 does not compile chan_vpb.so. The problem is it tries to compile chan_vpb.cpp to chan_vpb.o and chan_vpb.oo, then try to link them together. I manually compiled it, then make went smoothly. But it

So I've got a Voicetronix card and it looks like the kernel driver works. Other than the 0's for ID info. vpb: Driver Version = 4.0 vpb: major = 251 vpb: tmp [0xfc8fec00] dev->res3 [0xfc8fec00] vpb: tmp [0xfc8c0000] dev->res2 [0xfc8c0000] vpb: 1WS Write cycle vpb: Manufactured 00/00/0000 vpb: Card version 00.00 vpb: Serial number 00000000 vpb: Setting up udev... vpb:1 V4PCI's

Hi list, anyone know what is going on here? I don't get any sound from the out clip & I get the following when I dial in to asterisk (after which it just times out): -- Event [0=>[06] Ring] on vpb/1-7 -- Executing Wait("vpb/1-7", "2") in new stack Read_channel ## vpb/1-7: Setting record mode, bridge = 0 -- Executing Answer("vpb/1-7",

Hi list, I am having some difficulty implementing a certain dialplan where the following happens. If the first Dial() is not answered, I want to play a small greeting then ask the caller to either hold the line (try calling again) or press 1 to leave voicemail. exten => s,1,Dial(${BLAH},10,Tt) ; Dial 10 sec exten => s,2,Answer exten => s,3,Playback(greeting)

Hi, I am using a voicetronix OpenLine4. I downloaded a recent asterisk CVS from voicetronix webpage but have had no luck to reduce echo on outgoing calls and for it not to crach on incoming calls. I dont think both problems are related though. Here is an output of what happens when a new call comes in and my voicetronix tries to pick it up and crashes asterisk: > vpb/1-1: Event

When dialling in and dialling my extension, when answered I get " Read_channel ## vpb/1-3: Setting record mode, bridge = 0 WARNING[20499]: File chan_sip.c, Line 1111 (sip_write): Asked to transmit frame type 8, while native formats is 4 (read/write = 4/4) == Spawn extension (default, 1004, 1) exited non-zero on 'vpb/1-3' -- hangup on vpb (vpb/1-3) -- Hungup on vpb/1-3 complete --

Hi, I hope some can help me out, as I have a problem with the vpb driver in *, and I am hoping someone has hit these issues and can offer some advice. First off, I'm connected to a British Telecom SystemX exhange with the local Tel Co. I can ring out fine, but when the callee on POTS answers, the vpb driver detects a loop drop and immediantly disconnects the call. I have currently set

Good day all What is the amount of calls that asterisk can handle,SIP and from/to PSTN -- Thanks Altus Snyman Stormcorp Network Solutions +27 11 8071141 exten 301

hi there, i've been able to successfully run asterisk with the Voicetronix OpenLine4 card, it can accept calls and function normally. The only problem I'm experiencing so far is getting the card to outdial to a third party. What I'm trying to achieve is basically call bridging, where the caller dials in to asterisk, some IVR plays and then attempts to perform a "transfer"

Good day all I got my Music on hold to work but can I/how do i get music on transfer? Please help Thanks