similar to: sip.conf [externip]

Hi, I've tried to use SIPSAK to understand the troubles i'm having about sending my voice to the person I've called (extension), after doing this tests below I always got this error "error: this FQDN or IP is not valid: voicegw". This could cause problems (namely audio problems)? Best regards, Helder voicegw:~# sipsak -C empty -a password -s

Hi! Are you also getting in trouble while trying to register in Broadvoice? Cumprimentos / Best regards, Helder Rog?rio __________________________________________ Microrede - Tecnologias de Informa??o, Ltd. http://www.microrede.pt *** ? There are only two types of people in the world, those who have lost data and those who will. ? -- Richard Nixon

Hi, I've been loosing my mind with NAT and read that IAX doesn't have problems about nat. Does anyone knows about hadware (routers and etc) support IAX? Best regards helder -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041230/f689bdde/attachment.htm

Hi! Is there a way to avoid being "at the middle" of communications between two SIP endpoints? So that we can avoid loosing bandwidth with it? Is there a way to "forward" the authentication to a IAX provider and "transfer" the call to it, avoiding using my own bandwidth? I've tested it with SER with some results, I was wondering if it is possible with

Hi Friends, need to help. *I have problem about sip : SIP/2.0 401 Unauthorized* Is it require to nathelper module in kamailio ? *what can i write kamailio.cfg file when kamailio and Asterisk on same network?* Scenario is like as : ----------------------------- 1) kamailio server on 172.18.100.74 kamailio.cfg ( nathelpler module ) ----------------- loadmodule "nathelper.so"

Hi, We have some Asterisk servers that we are moving behind a NAT to preserve public addresses and make room for growth. This is Asterisk 1.4 NAT works very good with the externip/localnet-setting when we are connected directly to our teleco. But when I try to use NAT and put them behind our Kamailio something interesting happens: The media-address in the SDP is the internal ip and not the

Hi all! Do anybody has a full working environment using externip on an asterisk box behind a nat? I tried with two diferent boxes (Elastix-1.4.24 e Trixbox-1.4.22-3)and the asterisk do not replace neither contact, neither sdp headers info with the externip informed on sip.conf general parameters. I used these two statements: externip=XXX.XXX.XXX.XXX localnet=192.168.200.0/255.255.255.0 Do

#!/bin/bash # checksetexternip.sh # Author: John Cahill email at johncahill.net # Licence: GPL v3 # Description: script that queries checkip.dyndns.com to find the server's external IP address. Updates asterisk's externip value and does a sip reload if necessary. # Last modified 06/02/2012 is_ip(){ input=$1 octet1=$(echo $input | cut -d "." -f1) octet2=$(echo $input

Hello, I'm currently using OpenSER as REGISTER server and Asterisk for the call routing. Do i need the OpenSER nathelper module if i want to offer (mostly) automatic NAT traversal to my users or does Asterisk have the same functionality? It seems that the nathelper module should be able to automatically traverse any NAT as long as the User-Agents use symmetric RTP. Further it is possible (in

I am having difficulty configuring SIP behind NAT (using latest CVS). Using sip.conf: [general] port=5060 ; Port to bind to externip=ww.xx.yy.zz bindaddr=0.0.0.0 nat=yes register=>[userid]:[password]@voiptalk.org/2000 [voiptalk.org] nat=yes externip=ww.xx.yy.zz type=friend secret=[password] nat=yes reinvite=no canreinvite=no I fail to register. SIP Debug gives: SIP

Norm, thanks for the help. Applying the fix solves the issue I mentioned but now I have more issues. I can install clang, but when running I cannot compile and link files. If I compile with -c flag it works but compiling the following x.c file gives an error: x.c: int main(void) { return 0; } > ./clang x.c /project/helder/scratch/packages2/bin/ld: unrecognized option '-C'

Does anyone know if the 'externip=' in sip.conf is resolved just once at startup or on an on going basis? I would like to use a DNS name through one of the dynamic DNS providers, but if the DNS updates, and asterisk continues using the old resolved value, this could get tricky. Thanks, Dennis

Can i use a domain name instead of an IP address for externip (sip.conf) Because im using dynamic dns. Not sure what i'm trying to achieve as yet but, i want to know if it is possible?

Hi, What is the equal option for externip in asterisk 13 with pjsip. I have tried external_media_address=XX.XX.XX.XX external_signaling_address=XX.XX.XX.XX but asterisk 13 writes local ip to the from header. any suggestions? Best Regards, Madushan -------------- next part -------------- An HTML attachment was scrubbed... URL:

ekiga registration fails. I've set nat = yes ( also blank ) and i've set externip. Anybody have a sip.conf that works? Here's the sip debug: Reliably Transmitting (NAT) to 86.64.162.35:5060: REGISTER sip:ekiga.net SIP/2.0 Via: SIP/2.0/UDP 10.10.11.180:5060;branch=z9hG4bK17818198;rport Max-Forwards: 70 From: <sip:test at ekiga.net>;tag=as64618445 To: <sip:test at

Hi All, Is it possible to specify more than 1 localnet? I know this is an odd question. I have a customer that has multiple sites linked by VPN. Main range is 192.168.33.0/24 and a remote site is 10.1.1.0/24 We want to allow some access to the public IP address at the main site. For this to work I need to use the externip and localnet directive. If I do this it rewrites the SDP with the

I have an Asterisk 1.4.19.1 server that is behind a Fortinet firewall. Localnet is 192.168.2.0/255.255.255.0 and all external sip devices look as if they are on the same local network because the Fortinet rewrites the incoming IP as its own address. The problem I have is that when I set "externip=148.XXX.XXX.XXX" it is being ignored and I can see SDP packets that have the internal

Hi all, I've tried search this problem on the list... no luck... The case is: without externip/localnet config on sip.conf [general] my SIP trunk works, but with no audio NAT problem (asterisk sends the private 192 address to the outside...) when I configure externip/localnet correctly my SIP trunk simply disappear! Checking the signalling with tcpdump shows me that Im sending the

Hi! Could someone give me a hand? If I dial 200 for echo testing it works... Everytime I dial an extension ex. 505 get the error below.... In this example it was from 508>505 a Xlite Pro to a TA. I believe it has something to do with the way i'm executing the command dial but I use the "standart" that comes in the samples from asterisk. *CLI> -- Executing

No, you don't need a sound card. Do you have ztdummy loaded or zaptel device in your system? Regards, Gus ----- Original Message ----- From: "Chris Hariga" <contact@techselesta.com> To: <asterisk-users@lists.digium.com> Sent: Sunday, October 19, 2003 8:19 PM Subject: [Asterisk-Users] Music on hold... > Hi, > > I need a sound card and mpg123 for music on