Displaying 20 results from an estimated 10000 matches similar to: "SPA-3000 as FXO Gateway for * (Was: Qs about FXO/FXS cards)"
2005 Jan 03
0
SPA-3000 as FXO Gateway for * (Was: Qs aboutFXO/FXS cards)
Voxilla.com has a great config wizard for the SPA-3000 and *
http://voxilla.com/spa3kasterisk.php
I took the output from this wizard and dumped it on my test box with an
SPA 3000 (with some mods to match my * contexts) and everything worked
great.
Calls from the PSTN to the spa3000 are routed to dialplan #8 on the
spa3000, which dials *
Both the FXO and FXS port register with *
The SPA3000 is
2005 Sep 14
4
Echo on SPA-3000 FXO
I've had an spa3k in service here at the house for a while now. After
some initial wrangling, it's been working okay. I've had to reboot it a
couple times and have noticed something rather annoying though.
My setup is pretty simple and, dare I say, common. I have the SPA-3000
"inline" between my incoming POTS line and the internal house phone. It's
setup to deliver
2005 Oct 03
4
SPA-3000 generating one-ring calls
This is a wierd one. Can't figure it out. I have an SPA-3000 at the
house handling my incoming line. It's setup to direct the incoming call
to asterisk. Works great 99% of the time.
A few times a day, I'm getting calls that ring once internally and are
then hungup. I managed to get a detailed log [1] of what's happening
today and it looks to me that the SPA is acting wierd.
2004 Aug 03
2
SPA-3000 as a regular Asterisk FXO device?
My SPA-3000 finally arrived and I'm trying to get the FXO port on it to
work as if it was a X100P card as far as Asterisk is concerned.
I have Asterisk dialing out over the SPA-3000 FXO port no problem.
The issue I'm having problems with is having the SPA-3000 automatically
forward all incoming PSTN calls to the Asterisk "mainmenu" context (or
ext I guess).
Currently the
2004 Dec 16
0
SPA-3000 - Stop Message Waiting Indication
Hi,
I have my Sipura SPA-3000 setup with Asterisk as follows:
[spa3k_line1]
type=friend
context=home
secret=PASSWORD
host=dynamic
dtmfmode=rfc2833
dissallow=all
allow=ulaw
When an incoming call comes in, I have a Zap interface in Asterisk which
just does a Wait,15 then answers with voicemail.
The SPA-3000 detects the PSTN call and makes Line 1 ring - so I can
answer the phone if
2007 Aug 19
0
flash zap FXO port from SIP device (SPA-2002) using RFC2833 or SIP INFO
Sorry if this was posted yesterday, I was having issues with being
auto-unsubscribed because of my spam filter. Not sure if my post made it
through.
Hi everyone,
I'm wondering if I'm missing something obvious here, or if Asterisk just
doesn't support what I'm trying to do. It seems like it should be
simple, but appearances can be deceiving.
I've got an Asterisk box
2004 Sep 06
2
spouse-friendly spa-3000 pstn interface
This post is simply documenting a spouse-friendly way of using the
spa-3000 as both a fxs and fxo port for basic soho environments in
the US, allowing asterisk to participate as needed/wanted.
All home phones are connected _only_ to the spa-3000 fxs port.
The incoming home pstn line is connected _only_ to the spa-3000
fxo port.
Defined Line 1 (fxs) to register with asterisk via sip (extn
2005 Jan 01
25
Qs about FXO/FXS cards
Hello.
I am going to be putting together my first * system using FXO/FXS
interfaces. All the systems I have set up thus far have been pure VoIP
setups.
The system I need to set up should have 3 FXO interfaces and 1 FXS
interface, as well as several SIP phones. I have noticed people
complaining about Digium's TDM cards - are these isolated incidents or
are these cards unreliable? I intend to
2006 Feb 08
1
SPA-3000 VOIP-PSTN gateway - long delay between answering and ringing
Greetings,
We are currently testing a Sipura SPA-3000 as a gateway from our
Asterisk system to a PSTN line for 911 access. We have a number of
locations and want to place an SPA-3000 in each, connected to a PSTN
line that will provide the correct ANI/ALI information to 911 for each
location.
It all works great, except for a reasonably significant (4 seconds)
delay between when the SPA-3000
2004 Oct 07
1
spa 3000 help
Arrggghh. Tearing my hair out here.
I'm trying to set up the spa3000 in the UK for my home, and want * to
control the dial plan
I've googled to no avail. I've read the manual to no avail.
Can someone, please let me know what the parameters is the spa and * are to
a) receive a call from the pstn
b) make a call to the pstn from the phone attached
I can make sip to sip calls (i.e. I
2004 Aug 16
1
local echo using SPA-3000 as FXO port
Hi All,
Last week I started hearing a huge amount of local end echo on
incomming calls. I am using a Sipura SPA-3000 as my FXO connected to an
SBC POTS line. Echo cancellation is enabled in the SPA firmware.
As a test I switched to a Digium X100 card the still lives in my server
but the echo was about the same. I have both Polycom IP600 and SNOM 200
phone, which both hear the echo.
I'm
2005 May 24
0
Sipura SPA-3000 call progress, and interdigit delays
Hello,
I've been experimenting with Asterisk 1.0.6 and a Sipura SPA-3000, and
I've run into a couple of questions I haven't yet found clear answers to:
It appears that the SPA-3000 has no call progress on it's FXO
interface? Asterisk considers a dial() as answered when the SPA-3000 has
dialed the number on the PSTN line, not when someone has answered a phone
on the
2005 Jul 31
0
Sipura support down the tubes
I had a problem in the past with a SPA-3000 acting funny that Sipura
helped me with by telling me how to factory reset it. They responded in
less than a day to my email request and the unit has worked fine since.
I've had similar turn around on requests related to a batch of SPA-841
phones. They were all handled by real people who appeared very
knowledgeable on the products. This appears
2004 May 23
0
Sipura SPA-3000 Beta
Hi All,
I'm on of those brave souls who bought into the preproduction beta of
the Sipura SPA-3000 FXS/FXO adapter. I've had the unit a few days and
am exploring it's workings. I really want it mostly as a
straightforward FXO adapter, to replace an X101p. Let me be clear, I'd
love to support Digium in every way possibe, and will likely buy a
TDM40 card shortly. But, the X101p has
2006 Feb 28
2
Sipura SPA-3000 and PSTN dtmf
Greetings,
What is the recommended settings for using SPA-3000's FXO port for
dialing out to PSTN in regard of the DTMF?
The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports
registered to the Asterisk box with unique username/passwords.
The inbound PSTN DTMF works excellently, e.g. people calling from PSTN
into the * box are able to pick IVR items with DTMF reliably.
The
2005 Jun 14
5
HT-488 vs. SPA-3000?
Hello,
Just want to tap the collective wisdom of this list as to experiences
pertaining to the Handytone HT488 and the Sipura SPA-3000 adapters...
Basically I'm looking for a FXO/FXS/LAN ATA and these two seems to be
the top of the pick..Any comments and experiences esp. with Asterisk
compatibility would be great, before I plonk in the bucks.
TIA.
/wai-sun
2005 Aug 25
4
Sipura spa-2000 / 3000: surge protection
I am located in the UK, and I am using Sipura spa-2000 adapters to
connect analog phones to a voip network. The network connects to the
PSTN as well via the Sipura spa-3000 adapter.
I would like to provide surge protection for the spa-2000 and the
spa-3000 adapters.
1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage
before damage to the the adapter occurs?
2. For spa-2000,
2006 Jan 27
2
Spa3k and ISDN
Hello all,
I have an ISDN termination box (TR1) that converts ISDN(Bri) to 2 normal
analogue lines. The same number is assigned to these lines. These lines are
connected to 2 spa3k registered to my asterisk box.
When calls arrive, TR1 try to pass call to the first spa. If spa not takes
the call immediately then try to pass to the other spa. The only
configuration I found works is to put the
2006 Feb 09
1
SPA-3000 VOIP-PSTN gateway - longdelaybetweenanswering and ringing
You can even set it to zero. Mine works well when in zero. The line pick up immediately :>
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chris Stenton
Sent: Thursday, February 09, 2006 6:57 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] SPA-3000 VOIP-PSTN
2009 Dec 09
1
Problem with Asterisk and SPA-3000
Hello everybody,
I have a very strange issue with a Linksys SPA-3000 (1 fxo + 1 fxs) used
as PSTN gateway to asterisk in a small office. Everything works just
fine, except that sometimes, and it seems that only for long incoming
calls, the IVR menu appears on the middle of the call(like a three way
call, call goes on with prompts playing over the parties). Dialing an
extension at the prompt at