similar to: Re: Asterisk and Capi

Dear list, I tried to install the CAPI support RPM from the SUSE 9.2 disks. YaST tells me it is happy with the process. The Asterisk release I am using is the one that comes packaged in RPM format, also included in the distribution. Still starting asterisk with the usual asterisk -vvvc I see that something goes wrong. [app_capiCD.so]Dec 23 19:21:45 WARNING[1076850816]: loader.c:242

I had unexpected hangups from my asterix box using the i4l driver. (SIP <-> SIP calls worked execellent, but SIP<->ISDN didn't.) Then I changed the i4l driver in modem.conf with the chan_capi from jungham. (http://www.junghanns.net/asterisk) I followed his instructions in the INSTALL file, and first encountered some errors compiling it. It help by deinstalling several

Hi I use RH 9 + asterisk v1.0 stable + 2 PCI fritz cards + chan_capi 3.5 and it works fine, Since my users want fax fonctionnality and customers know 1 of the msm as fax number I wanted to try the chan_capi-0.3.5 patch if I patch chan_capi and run make, I get an error message , as you can read below, orginal chan_capi compile works, when patched I get an error, no CID ? Any idea ? anybody

Hi, Total newbie - I spent most of yesterday looking through various docs and could not come up with anything useful. I have 2 different SuSE 9.3 boxes - a P3 with 2 * ISDN BRI pci cards and a P4 with no asterisk relevant HW at all. I am using the default asterisk install that was loaded when I did a (full) fresh install of SuSE 9.3. I get the *same* error on *both* boxes, even though one of

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi i've installed asterisk by last cvs and i note res_parking.c is not anymore there; chan_capi-0.3.4b INSTALL file require: in /etc/asterisk/modules.conf insert the line: load => res_parking.so load => chan_capi.so running asterisk i get: [app_capiCD.so]Jul 21 15:32:26 WARNING[1076988448]: loader.c:242 ast_load_resource:

Hi all, I've finally taken the plunge and had isdn installed. It's a BRI from Telewest in the UK. I'm told by the provider that it's in point to multipoint mode with 6 digit presentation. I'm using an AVM fritz (bt speedway) with the fcpci-suse9.1-3.11-02 driver. Chan_capi seems to be installed fine. I can receive incoming calls. However, I can't call out. When ever i

asterisk-users-request@lists.digium.com is believed to have said: >chan_capi does not set the NT-mode. Your cards driver need to do that. >E.g. for Eicon DIVA Server cards, you just set the '-x' option with divactrl >or set NT-mode in the config wizard. >chan_capi does not (need) to know anything about what protocol the card is >doing. CAPI is independent here. Ok.

So I've got a PBX running with one Fritz card with the fcpci module and that works fine, but add another one and... kersplat... Kernel Panic. It boots fine with two cards, but panics as soon as the first fcpci.ko module is 'modprobe'd - I don't even get as far as modprobing the second. Any ideas on what's going on? Should I just back-up to an older version of the fcpci module

asterisk-users-request@lists.digium.com is believed to have said: >I am using slackware 10.1 (kernel 2.4.29) and I am getting the following >when I issue gcc -v Dimitris, while I never compiled chan_capi I thought you would need a 2.6 kernel to use it. HTH Aldo

asterisk-users-request@lists.digium.com is believed to have said: > >The active cards do the ISDN protocol stuff on board, so the host CPU/driver >does not need to do that -> better performance, less interrupts. >The AVM cards do not have such DSPs on board, so no echo-cancel. >But the Eicon DIVA Server cards do. They do analog Fax/Modem, echo-cancel, >DTMF-detection, voice

Hello List, because this is my first post to this list, i'd like to introduce myself. My name is Thorsten M?ller, 26 years old and live near Frankfurt/Main in germany. Okay, now to the reason for this posting: I just installed my first asterisk server (Debian 2.2 Kernel 2.4.18-686) with AVM ISDN Fritz PCI card (passive). I followed the configuration on http://voip-info.org and the

asterisk-users-request@lists.digium.com is believed to have said: > >Hey Dan!! > >Give us a clue as to what hardware/setup & network provider you have there, >and we might be able to help :) > >Paul > Hello Paul, hello everybody! I have, too, an inbound call problem. I am using an ISDN Fritz Card PCI 2.00, together with chan_capi 3.5.x . As I call my number I get

asterisk-users-request@lists.digium.com is believed to have said: >> While we are at the subject another couple of simple related question. >> >> Are HFC-S cards active? I got one for a very low price, so that I >> imagine it will be NOT the case... > >No, these cards are passive. The protocol handling must be done by >the hosts CPU / driver. OK; price

Dear list, today I installed a new asterisk machine, bound to replace my current pbx. I am using a Fritz ISDN card; on the old machine with the drivers coming together with the super-old rpm asterisk installation of SUSE 9.2. The new machine is finally on asterisk 1.0.9, with chan_capi 0.5.4; now I am doing a nightly test. Apparently I can receive calls, but I can't dial out. I seem to

Hi, Since Carl has kindly provided us with fax support for CAPI based cards, we have been using it with much success. Today I have modified app_capiFax so that it now supports a dynamic CSID. The following example uses the DNID created by chan_capi on an AVM Fritz! card. * Receive a fax with CAPI API. * Usage : capiAnswerFax2(path_output_file.SFF|stationID) * * This function can be

OS: Redhat 9.0 Kernel: 2.4.20-8 Asterisk: latest CVS head Hi all, I try to compile the latest chan_capi, but it won't work. I also tried the patch that is arround there from frank sautter and I have installed the asterisk header files. Asterisk is working very good :) and the Fritz AVM pc Card is running. capiinit: 1 fcpci running fritz-pci A1 3.11-02 0xbc00 5 lsmod: fcpci

Hi again! > I have excellent success with the tiny "fcpci" and chan_capi, which is > also working great with capi4hylafax. See > net-dialup/fcpci-0.1-r1 in gentoo (should not be difficult to use this > on other distros, but I have never done so). Do not confuse this with > the "fritzcapi"! I managed to install fcpci and it seems to run fine (capiinfo

Hello, i have asterisk with chan_capi ( AVM Fritz card ) working, isdn line BRI, setup to point-to-multipoint. working fine, but when both channel on interfaces are used and somebody wants to call in - the response is "ha-la-li" - sounds like msn or called number does not exists. i think that right response should be - line busy tone... right ? can anybody tell me what is wrong ?

I did the following: - chan_capi-0.3.5/Makefile: uncommented CFLAGS+=-DDEFLECT_ON_CIRCUITBUSY - recompile asterisk + chan_capi - added /etc/asterisk/capi.conf: deflect=0800123456 ; some 0800 test number - in etc/asterisk/extensions.conf under [tcom-in]: exten => 98765,1,capiCD(0800123456) - made both b channels busy by outcalling on both lines (ISND BRI) - called my msn (98765) by mobile

Good day, *newbie alert* I try to run * with capi_chan (and later on SIP). System: Debian 3.0 / apt-getted most stuff except chan_capi and b1.t4 HW: AVM B1 ISA / Celeron 400 / 128MB RAM Starting * the following ends up in the messages Jul 22 19:47:03 WARNING[16384]: File chan_mgcp.c, Line 2925 (load_module): Unable to get our IP address, MGCP disabled Jul 22 19:47:03 WARNING[16384]: File