similar to: Cisco 7905g TFTP Configuration

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

Is the 7905G Firmware the same as the 7960 firmware? -- MBM

Hi, How well to the Cisco 7905G or Cisco 7912G phone work with Asterisk? Cisco claims both phones do SIP. I was strongly considering Polycom phones. However, it appears to be quite difficult to obtain support or firmware for Polycom phones. On the other hand, I find Cisco is very well supported. Thanks, Adi

Hi to all, I've just received my Cisco 7905G ipphone. I want to connect it to asterisk server but it looks that it has been preloaded with sccp protocol, so I guess I need H.323 or SIP firmware image of some kind. I have a working tftp server on my asterisk box also....What do I need to do now to get things wokring? Thanx in advance, Victor...

I have noticed a problem with the Cisco 7940/7960 phones where if you put your voice-mail box on hold using soft keys and come back you can no longer navigate. I am curious if anyone else can duplicate this problem. Happens reliably for me with the 7940 phones. I use rfc2833 for DTMF. I would think it was a Cisco bug, but for the fact that this did not happen with older version of

Interesting notes on the 79xx series. The 7920 is the wireless phone; not mentioned here. For a more complete guide to Cisco's phones, see: http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheets_list.html The 7902 is the "very inexpensive" Cisco phone, and it looks like it will be SCCP (Skinny) only. Twiddling my thumbs here waiting for the chan_sccp to

I am getting (with older image): RFC3389 support incomplete. Turn off on client if possible How do I turn that off for the DG104s? Or if I can't how do I tweak asterisk? I see posts about ATA-186's having an audiomode, but the closet I came to was inbanddtmf. I tried =0 and =1, no effect. Thanks! -- Zot O'Connor <zot@zotconsulting.com> White Knight Hackers, Inc.

I have a few Cisco 7905G phones and I having a little trouble configuring them. They are working with Asterisk. I'm able to get the sip image loaded, but I can't get the phones to blind transfer. Does the Cisco 7905G Phone use XML Services? If you are using the 7905G phone, would you post any of your configuration files so I can try and figure out where I'm going wrong? Thanks for

Hi All, I'm looking at getting some Cisco VoIP hardware to play with in combination with a Asterisk server. I've heard that there is beta software available to do SIP on the 7905G. So, I'm thinking of either getting a 7905G or a ATA186. My dillema is, which one to buy? I can get both for about the same price, has anyone had any experience with using a 7905G with Asterisk? On

Hi I'm trying to deploy asterisk, but I can't seem to find documentation for the TFTP server to run the cisco 7960 ip phones' I was told before that you need it and it could run on linux. Thank You ,jm

To get the SIP firmware for these phones, you need to buy a Cisco SmartNet support contract (about $75 USD in the USA, though I've heard rumors a Europe-only contract exists for about $10 USD.) You can purchase one through most Cisco resellers. That will give you access to Cisco's download site. Configuration of these phones under SIP is not quite as straight forward as it is with SCCP,

I bought a couple of 7905G phones with a Callmanager license but i found on the site these phones can have a SIP image (which i downloaded) but before i upload the image i want to know if anybody tested them ? Michael -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031016/4c2821af/attachment.htm

I have had a 7905G lying around for the past 8 months and have just had time to start setting it up with asterisk. I started following the links on the wiki about where to download the firmware from cisco. I signed up to cisco so I could apparently download the new firmware for the phone, but it now seems I must purchase a support contract. Is this correct? Is there any other way to get the

I have been able to upgrade my Cisco 7905G phones to the SIP Image without any problems, but I just got a 7960, and I can't seem to get to the settings so I can upgrade to a SIP Image. When the phone boots up, it says Configuring VLAN, Configuring IP, TFTP ????..., then Protocol Application Invalid. I noticed on the wiki page "Firmware issues on 7940 - 7960"

Hello, I tried to configure a cisco 7905 IP phone using the skinny channel but I had not much luck. The relevant portion of skinny.conf is: [cisco1] device=SEP000F3487F8E3 callerid="Alex" <123-456-789> mailbox=500 callwaiting=1 transfer=1 context=default threewaycalling=1 line => 500 ; Dial(Skinny/500@cisco1) I set up the tftp server, and prepared the following

Hello, I'm looking for any comments or user experiences from anyone who is using 7912G phones with SIP. Any installation issues? Usability problems? Do the features seem to work, etc...In short, I'm looking for your opinions on how suitable this phone is for an asterisk implementation for approx. 10 users. Next logical question: what other phones would you recommend for a situation

I installed * to primarily test its voicemail feature. I installed it on a server WITHOUT any telco board (i.e., digium). Installation looks ok, however I am having problems. MY SETUP: 2xATAs are configured to use * as GkorProxy Asterisk is registered to my SER SIP/RTP Proxy 1.) First test - ATA1 calls to ATA2. When voicemail starts playing, it just cuts-off after 5-10seconds (consistently).

Hello all! I have an FXO port on a cisco router that is directly connected to our PBX. Our ATA-186 (firmware version 3) registers with asterisk, which connects to our cisco router's fxo port to give me a dialtone on our PBX from the ATA. How do I pass the flash button to the PBX? It seems the ATA-186 wants to control the flash by putting my first call on hold and prompts me to dial another

I'm having a horrible experience getting a Cisco ATA-186 to work with *. I can make calls from the ATA with no problems. However, incoming calls make the ATA ring once, and then the call is disconnected. I have no problems with my Sipura 2000 or my Grandstream phones. I am running 2.16.1 sip code on the ATA 186. Neither * nor the ATA is behind a NAT. They are both on public IP addresses

Hi All Just received my first 7905G from a distributer here in Sweden. According to the spec this phone should be able to use SIP. Now I been looking on Ciscos home pages for several hours trying to find a "SIP image" for this phone. No luck at all, need special access to be able to download software to this phone. Is it the fact, that I have to pay for a contract of some kind to be