similar to: Has anyone connected to 7960 with console cablefor setup?

I have a Cisco 7960 phone. I cannot seem to use the settings button to get into the phone to change the TFTP server. I've set up a DHCP Server, TFTP Server with the same address, and the phone requests the address of 0.0.0.0, the server offers the address of 192.168.2.2, but the phone seems not to take it. I have no action on the TFTP side. So, since I can't seem to server the phone

I'm still having problems getting this to work. I cannot get anything to display on my 7914 other than blank lines. I have SIP/5920-5930 in [main] that I'd like to add to the 7914 and indicate hook status. The 7960 is registering okay as SCCP/5000. What exactly should my sccp.conf file look like? When I make changes to this, how do I enact them? Do I reload Asterisk and reboot the phone

Does anyone have a recommendation for a good SIP phone with a busy lamp field? I need my operator to be able to see extension status for about 20 extensions and transfer via HOLD + extension button. I've got a pair of SNOM 360s with the sidecar, but I'm very disappointed with them. The buttons are cheap and rubbery like a Sipura 841, the handset cord is short and cheap, the audio quality

I am looking into the possibility of buying a Cisco 7960 with a 7914 expansion module. I know a lot of people are using the 7960, but I haven't read much about the 7914 and I was wondering if anybody has used this module with Asterisk? -- Thank you for your time __________________________________ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com

Hi, Iam using cento-5.3 on x86 machine and iam working to get the console messages redirected to serial port. I have made the necessary changes in the /etc/inittab file. - - - - - id:3:initdefault . . so:12345:respawn:/sbin/agetty ttyS0 9600 vt100 - - - -- - and also in /etc/grub.conf file - - - - serial --speed=9600 --unit=0 --word=8 --parity=no --stop=1 terminal --timeout=10 serial . .

We are looking to replace our existing Legacy PBX with Asterisk. Our receptionist currently has a light display for a certain extension when someone is on a call. When she needs to transfer she simply hits that button. Is it possible to use a snom360 + Sidecar to monitor 30 extensions and make transfers using the buttons? Does the Cisco 7960 expansion module work with asterisk? Thanks.

Hi all, Thought I'd forward this on, as the apcsmart driver doesn't appear to have any support for this (admittedly obscure) setting and it doesn't seem to be listed at http://www.networkupstools.org/protocols/apcsmart.html. Hope someone finds it useful. Later, Russ -- Russell Odom http://www.gloomytrousers.co.uk/ Fast, cheap, good: pick two. -------- Original Message --------

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

2011/11/30 Mike <list at net-wall.com> > Hi Olivier,**** > > ** ** > > It if occurs only on the sidecar, I would imagine this is either a > defective sidecar/Polycom phone, or a defective PoE switch not giving > enough power. Changing PoE port would eliminate of confirm the PoE port > being the issue, but I?m betting on a Polycom defect.**** > > ** ** > >

Hi ! On Cisco 7960 (with or without 7914 add-on module) when I press speakerphone button (or select line with line button - which automatically put second line on speakerphone) after about 15-20 seconds of dialtone Asterisk stable dies (seg fault). Tested versions of Asterisk are 1.0.2, 1.0.3 or 1.0.5, chan_sccp is newest form CVS of chann-sccp.sourceforge.net ). Firmware of 7960 is

We are having an issue with the SPA962/932 combo where the phone and the sidecar will reboot unexpectedly ? could be onhook, could be on a call, doesn?t seem to matter. I read that certain early firmware revisions could cause this so I?m running what was a week ago the newest available (5.1.18). A call to Linksys support suggested that I ensure that the phones are using a recent firmware version

I'm looking for some ideas of people who have setup a sidecar (eg: Aastra 560M). Obviously it's handy for BLF (to see who's on a call)...but what else? Anyone want to share interesting things they've done with a sidecar? -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have two serial-related questions (1) What is the CentOS (or *nix) equivalent of Hyperterminal in Windows? Sometimes I'm on a CentOS box and need to, say, console into a Cisco or something. and (2) I have a CentOS server that I may need to transport somewhere and will most likely *not* want to carry around the monitor. Where should I look in connecting to my server via a serial

Hi all, One of the things that I keep being asked for is a sidecar for the receptionist phone. Are there any SIP phones available on the market with a sidecar in addition to the snom? Or is the snom my only option? Any help would be appreciated. Thanks, Max

Hi I'm currently using a windows image processing application that regularly writes the user's image adjustments out to a 'sidecar' file in the same directory as the original image. When the original file is on a local disk this works fine but when the original image is on Samba share, the sidecars are not created. The application reports the following in its log: 2012-07-14

I was always puzzled by posts to the list about people having problems getting hints to work on a Snom, since I always seem to have no problem making it work. That is, until today when I tried to get a sidecar to work. All I could do was get a monitored extension light to light up continuously, regardless of state. Frustrating! Going back to my working dialplans where I got 1 or 2 lights working

Looking for two things: 1. Anyone that has dialplan logic for an executive assistant. My owners want their extensions to ring on her phone, and be very obvious to her which extension is ringing. They also want her to have presense. She's got Polycom IP 650 with sidecar, they have IP 550 phones. Thusfar I've got her registering to 4 extensions. Each extension is labeled with an

Hi List, Asterisk 1.4.22 built by root @ carl on a i686 Purely SIP Linksys SPA962 with 932 sidecar and also Cisco SPA508 / 525G with Sidecars Have an issue with this happening with a number of my customers. Customer hits the ringing BLF on the sidecar to pickup the call incoming on another handset. Not always but enough to cause me a problem it leaves a channel open. At the moment, this is

I have to reinit a firewall that can only be done from its console port, and I do not have an XP system with Hyperterminal on it. So I went through the archive and learned that minicom could do the job for me. I installed it and went to configure it (minicom -s). I can set the speeds, but the challenge is selecting the serial device. I have a Serial-to-USB dongle, and when I connect it,

There is an option that you can add to your dhcp server option 150 IIRC. -----Original Message----- From: "Rich Adamson" <radamson@routers.com> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: 2/27/06 4:37 PM > Has anyone done any integration work with Covad's hosted solution ? I > am considering