similar to: 3com NBX and Asterisk Integration.

Hi, I've looked pretty wide on Google for this so I don't think it's been asked before. Has anyone had experience integrating Asterisk with a 3COM NBX system? The only way that I can see that looks possible is via the 3Com NBX ConneXtions H.323 product and then one of the H.323 Asterisk channels. Has anyone done this? Any pointers as to what to avoid or whether to even attempt it?

How hard is it to integrate * into an existing 3com NBX setup? -Tim -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041004/bf01e3d9/attachment.htm

Has there been any luck getting the 3Com NBX series phones to work with Asterisk? Thanks! -Andrew

Does anybody know if the 3com NBX 100 phones will work with Asterisk? The phones require a boot image to be sent either through layer2 or layer3 before they will function properly after being powered on each time. Thanks.

We've been talking about moving from our NBX100 to an asterisk solution for some time now. Well, to make a long story short, the call processor on our NBX has went south. We are now forced to purchase a new call processor >$500 or move our solution to asterisk. (Which is up and running and have been tested with Grandstream Adapters.) My question: Is there anyone out there that

Has any advancement been made to get 3102 operational in either a SIP or H323 asterisk environment. A post back in time mentioned a downloader service. >From the posts and articles I have read, the NCP is acting like a bootp and tftp server which uploads the configuration to the phone?? Am I close? if so, where does one get the SIP image for he 3102 and 2102 phones? I had 8 donated, but they

My new company is going to enter a bid competing with 3Com and Siemens solutions from others. Voice service is a PRI T-1 with a block of 100 DID numbers, a second T1 that will carry Integrated voice/data, 12 voice/768K for redundency. I asked this a week or two ago, now I have more details. Best/$ channel banks that work with Asterisk and Best deal on phones... 16 business, 34 basic IP

Hello, everyone, I am currently trying to get the asterisk server to talk with a 3COM NBX with T1 connection. My asterisk server has a T100p, TDM20B, a couple of sip phones. Now the sip phones are calling 3COM NBX phones fine, however, the analog phone has problem when dialing the NBX phones. The connection is established and the NBX auto-attendant picks up the call however the NBX end says that

i am just curious how many * systems are in the real world with more than one user. do you run a certain version? you dont update CVS do you? any admins running a system of over twenty? over fifty? over one-hundred? i deal with 3com and nec systems all day (i am cerified in the 3com nbx advanced network telephony, elite voice mail, CCNA, A+, nec ipk, and soon to be "asterisk school of

Hi, I would like to simulate data with a binary outcome and a set of predictors that are correlated. I want to be able to fix the number of event (Y=1) vs. non-event (Y=0). Thus, I fix this and then simulate the predictors. I have 2 questions: 1. When the predictors are continuous, I can use mvrnorm(). However, if I have continuous, ordinal and binary predictors, I'm not sure how to simulate

Greetings all, I am interested in setting up a lab in my house to run my home phone system. Can some one point me in the right direction hardware wise for achieving this goal? I happen to have a few 3com NBX phones, and have been told that they are SIP compliant but am not exactly sure if I believe 3com...I would be interested to know if anyone has these things working on *. In any

Hello! Is there a phone compatibility list anywhere? I know Asterisk is supposed to be compatible with IP phones that support SIP, h.232, and IAX, but a list of phone known to be supported would be a nice addition to the documentation. I need a buisiness phone, and the Cisco is _EXPENSIVE_ I like the 3com 1102, but it is NBX phone, and I can find no documentation of this phone working

Dear my friends... I am still new in CentOS. I use CentOS 5 for my new server with cpanel. I have installed the cpanel. The steps were: 1. cd /tmp 2. wget http://layer1.cpanel.net/latest 3. sh latest The installation show a message that the cpanel installation was completed. But I can not see the cpanel login form on my server, either: "http://WWW.MYWEBSERVER.COM:2082" or:

thanks to everyone offering sussgestions and pointers in answer to my questions about SME VoiP/* in the UK; i'll update you on my progress as and when this ends up as an implemented * solution (and i totally take on board the recommendation to look at 2nd hand CCME -- i should have said at the start that i've just co-ordinated an NBX install for a much larger project and that part of

The following fit does not make sense to me, please, correct me if I have a logical error. > moddowsn Call: coxph(formula = Surv(start, stop, resp) ~ sn + matfac2, data = coxsn1, method = "efron") coef exp(coef) se(coef) z p sn2 0.0497 1.051 0.02030 2.450 1.4e-02 sn3 -0.0532 0.948 0.02038 -2.610 9.0e-03 sn4 -0.0410 0.960

Looking for someone with a successful experience similar to this; I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk, but over a long distance. We do not need any IP connectivity and the solution requires G.711u audio so there is no benefit to using IP. Has anyone here successfully cross connected any PBX PRI interface expecting NI2 PRI signaling B8ZS/ESF with an

Can anybody recommend a good web interface for asterisk that actually works. I am looking for a web interface that can show how many callers are on the phone, should be able to transfer the calls and disconnect. I have tried using the flash operator but has been unsuccessful in making it work. thanks -----Original Message----- From: asterisk-users-admin@lists.digium.com

I swear by Belden. http://www.beldencdt.com/ Not to be confused with Belkin. I have used an entire roll for 1 run of 1000 feet!! Out of spec but it worked. No Packet Loss. And the Fluke Meter Certified it for GigE. I sourced from GrayBar. > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Does anyone know of a means of backing up/restoring the settings in a systems non-volatile ram under CentOS? regards Phil Vossler westek TECHNOLOGY www.westekuk.com Telephone +44 (0)1225 790600 Fax +44 (0)1225 702968 Westek Technology Limited, Unit 1 Lancaster Park Industrial Estate, Bowerhill, Melksham, Wiltshire, SN12 6TT, UK. -------------- next part -------------- An HTML

An example for Radius is calling cards.. I can use * for this kind of service... With platforms that use Radius Server. -----Mensaje original----- De: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] En nombre de asterisk-users-request@lists.digium.com Enviado el: Lunes, 17 de Noviembre de 2003 07:16 p.m. Para: asterisk-users@lists.digium.com Asunto: