similar to: anyone know anything about audiocodes analog gw's

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

Im trying to get my asterisk box to register to a sip provider without much success. here is my console output in asterisk Dec 13 12:57:17 NOTICE[213005]: chan_sip.c:3982 sip_reg_timeout: Registration for 'voicemail.nexband.com@metaswitch.nexband.com' timed out, trying again -- Got SIP response 403 "From: URI not recognized" back from 208.149.73.5 Urgent handler in my

ive had enough of cisco unity and microsoft exchange and im looking for alternatives to our voip system. right now, we have 3 cisco callmanagers, 1 cisco ip icd system, and 1 cisco unity voicemail system. all phones are cisco 7940/7960's and some ata186/188's. voice gateways are cisco vg200's with pri cards (5 total). im running h323 on the gateways and phones are of course

I have been searching for some documentation that would indicate if Asterisk supports H.248 and everything I have come across seems to indicate I should use MGCP which I would agree is a better choice but unfortunately the equipment I am trying to integrate only does H.248. Could anyone point me to something related to this. -- Chad Whitten Metro Network Solutions (601) 366-6630 Phone (601)

Has anyone had any success using the Adit 600 with the CMG card talking MGCP to asterisk? I want to have a central asterisk server with 10 Adit 600's at various locations providing 24 FXS ports.... Thanks, Isaac

Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP router using MGCP IP protocol, instead of controlling it through an E1. Have anyone tried this configuration? How does MGCP works? I've tried to search for it on Google, but I only find the protocol specification for it. Is Asterisk fully capable of this? I can't find any documentatin covering the use of MGCP in Asterisk.

Is anyone out there using an "AudioCodes MP108 8-Port FXO Analog Gateway (SIP)" with asterisk to support both inbound and outbound calling? If so, I'm interested to hear how it works, and I'd love to see some example confs (both in sip.conf and on the MP108). This product has been recommended to me by a SNOM/Asterisk-friendly distributor, but I would like a second opinion

Hello all, I'm working on a little project right now and have ran into a snag. Was hoping someone would be kind enough to give me a few pointers to help me get past the current issue... I have an AudioCodes MediaPack MP-114 (2FXS and 2FXO... SIP firmware...) that I'm trying to get to play nice with Asterisk 1.4. I've got it to the point where the AudioCodes box picks up

I'm trying to connect this FXO GW without any success 1) I had to configure the " " to "allow any SIP to connect , so there will be a connection. afte that when I'm dialing I get a noise. I read on the internet that I have to change the impedance (?) 2) I could not find any HOWTO configure this combination - I read that it is a lot of pain to configure the Mp10x but than

I have some Audiocodes units which appear to be running Linux, according to the unit's own "System Log" kern.warn Linux version 2.4.21openrg-rmk1 #2 Wed Aug 30 17:05:29 IDT 2006 However my contact at Audiocodes claims otherwise On 12/4/06, Yaniv Nizan <Yaniv.Nizan@audiocodes.com> wrote: > > > > I doubt that we are running Linux on the MP-202. Perhaps there is a

Is anyone on the list using an Audiocodes gateway with asterisk and SIP? I'm looking at that platform, but I have a couple of issues: 1) Echo cancellation. The echo that I'm hearing with an X100P is unacceptable. Does the Audiocodes do better? 2) Line signalling. I'm using Kewlstart with the X100P, but it looks like the audiocodes uses loopstart only. How does this work with

I have an Audiocodes MP-118FXO in production. When an outbound call is made and the remote party hangs up, the Audiocodes hangs up the call immediately. But if an incoming call is received and the remote party hangs up, the Audiocodes does not hang up immediately. I have tinkered with Current Disconnect and Polarity Reversal settings, to no avail. Anyone experienced this issue with Audiocodes or

Is anyone on this list using and audiocodes FXO gateway? I have Asterisk(1.07 on OS X) setup and working fine, including SIP phones and IAX2 phones - I can make outbound calls just fine and receive inbound calls just fine. However, I can't seem to find the right series of DTMF settings on the AudioCodes to allow DTMF tones to be sent after an outbound call is connected(phone banking,

Hello, I'm helping a colleague (*) which has the following setup: ITSP --- <T.38 capable PJSIP trunk> --- Asterisk 13 --- <PJSIP>-- Audiocodes MP-112 --- <FXO/FXS> --- Fax machine My issue is the following : Audiocodes gateway reject INVITEs with 488 Not Acceptable Here It seems this gateway requires t38 settings to be present in SDP body in the very first INVITE. My

Has anyone used the AudioCodes MP-20x? http://audiocodes.com/Objects/Analog_Telephone_Adapter_Series_MP_20X.pdf Seems like a good device, but I can't seem to find anyone actually using them... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061022/6ca85b8c/attachment.htm

Does anyone have any information for me? Welinghton. Citando Welinghton Magno Guimaraes <welinghton.guimaraes at ufvjm.edu.br>: > Hello! > ? > I am setting up an Asterisk server with a Mediant 1000 (Audiocodes) > to make external links. Does anyone have any manual or instructions on > how to proceed? > ? > Asterisk ?=>? Mediant 1000 (AudioCodes) ?=>?

I'm having problem passing Caller ID to asterisk from AudioCodes MP-114 (FXO) AudioCodes is passing the caller ID to Asterisk but Asterisk is trying to interpret it as authentication: [Dec 31 11:41:07] WARNING[9752]: chan_sip.c:8553 check_auth: username mismatch, have <pstn-5665>, digest has <pstn-1270> [Dec 31 11:41:07] NOTICE[9752]: chan_sip.c:14316 handle_request_invite:

Jerry and Michael, many many thanks for your posts. Erick. On 5/24/06, The VoIP Connection <asterisk-biz@thevoipconnection.com> wrote: > Here are the step by step instructions for setting up a brand new Audiocodes > FXS gateway for use with an Asterisk server: > > Connect the gateway to a network switch and connect a computer to the same > switch. Then configure the IP

I have AudioCodes MP-114 and I'm trying to configure SAS (Stand Alone Survivability); when Asterisk is down the MediaPack gateway should forward the call IN/OUT through the gateway (without asterisk in the middle), but it is not working. I'm working with tech. support from the source I purchase the unit from they we are just emailing back and forth and the unit is still not working. Can

hi, i've successfully configured 2 audiocodes mp104 fxs and fxo configured using SIP with asterisk currently i want to add another 2 boxes of audiocodes mp200 to add up a total of 4 trunks how can i combine this mgcp to run together with asterisk SIP? Thanks in advanced Steven