similar to: Sipura SPA-841

I am looking at some lower cost phone to use with Asterisk. What is the ArtDio IPF-2000 or the Sipura SPA-841 like? Also, I see voipsupply.com has an ArtDio IPF-1000 listed, is this a new or an old model? I cannot find any information on it. Adi

I -think- that the Sipura 841 was PoE... and I'd been anxious to find out. However, according to Atacomm.com, it's been delayed until mid-January. *sigh* So: does anyone know of a (decent) phone that meets the following criteria, and isn't too expensive? - SIP - two (or more) lines - some form of TCP/IP-based configuration - 802.3af (power-over-ethernet) - 100 Mbit passthrough (not

Some people on this group may have understood from messages posted here that the Sipura SPA-2000 is not currently available for shipping. That is not the case. Voxilla.com has the Sipura SPA-2000 available for immediate shipping, and has had them since late November. The price is $109.95, and it comes with a month of free VoicePulse service with activation fees waived (a $65 value). In return

Anyone have one of these yet? http://www.voxilla.com/shop/index.php?action=item&id=38 -Dan

I've been looking out for the Uniden UIP1868 for a while now, but I haven't seen it anwhere that I'm used to buying things from. According to froogle, a couple of places (that I've never heard of) have a small number in stock (small = 10 in this case). I'm doubly suspicious because even uniden's own online store doesn't have them available yet, not to mention

Hello, How good is :SPA 841 form SIPURA. Thanks Varun

I want to implement a one way announcement and paging facility using Asterisk and Sipura phones. The wiki says Sipura phones only support Auto Answer using the Call-Info header which is no lone shipped with asterisk stable since 1.0.4. I would like to ask if anyone has implemented a similiar facility using Sipura SPA-841 or any other SIP phones. If I could take a look at how

I have just bought several Sipura SPA-841 SIP phones, and after some testing I have found out that the volume received by other parties when calling using the handset is very low. I've been able to reproduce this problem in the 3 phones I've tested so far. I've tried tweaking several configuration options but nothing I has helped so far. Has anybody else experienced this problem?

Hi, the topic says it all really. Does the Sipura 3000 detect and report UK clid correctly? thanks Mike

Anyone having problems with registration to * from a SPA-841? I got a SPA-841 a week ago. I noticed that sometime it could not be reached (dialed to) and it can't dial. In this case the line LED is yellow. I enabled logging to syslog and there is a hint as to what happens. For some reason sometimes it gets "401 Unauthorized" Any ideas what is happening and how to fix it? Phone

Hi all, I was wondering whether anybody here would help me clarify this minor issue please. If I have the following setup; Asterisk ------ Sipura SPA 3000 (fxo) --------- Pstn Line Would a call coming in on the pstn line be answered by the ATA or just get passed through to the * server (depending on dialplan) to handle? So basically, the caller does

Hello, I am very new to asterisk and voip in general and so far have managed to get the FXO card and a few sip phones working fine. My question is where does the Sipura SPA 2000 come in the picture? Can it be used as an extension (i.e FXS) ? Or is it to be used as a line (i.e FXO)? Or it can be used as both? My understanding is that its just like another ATA186. Is that true? I guess what I

Well I just need to say I got my phone last week. Here is my quick review of the phone and hope that someone has a possible fix for it or I will be sending it back. First the phone is nice looking in my view and it's heavy so it feels like a real desk phone. But it has these stick, gummy or I really don't know how to describe the bottoms on the phone. There good size but when you press

Hi all, The problem is on the volume of the voice sent by the SPA-841. I think the echo cancel algorithm sets a limit to the microphone when detects sounds or noise from the earphone. This problem generates an oscillation on the voice volume sent by the phone and even turns it off completely for very little lapses of time making the communication very uncomfortable. I manage three different

I just got a refurb Sipura SPA-2000 and was able to assign it an IP address with DHCP and ping the device, but then I ran the firmware upgrade utility to bring it up to spa2k-2.0.13g which seemed to work just fine, but after it rebooted I cannot connect to its webserver for configuration. I can still ping the unit. When I use the built in voice menu it reads back the right IP address, webserver

Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Well, a bit of a newbie using Asterisk and trying to get some Sipura SPA-841 phones to talk to the Asterisk server. Not doing something right apparently.... If I turn on debug for the extension in the CLI (sip debug ip xxx.xxx.xxx.xxx) I see frequent 5 packet attempts by the server to contact the phone, but seems to always be failing. The status

Hei! Does anyone know how to configure this phone to autodial the number after interdigit timeout has passed? Rennes

How to Connect SPA-3000 to Asterisk so * will answer? After setting up Asterisk on Gentoo the extension.conf contains [demo] context; but my asterisk is not answering? In SPA-3000 in PSTN Line - tab under Dial Plan 1 I have: S0<:demo@10.0.0.101> Default dial plan is set to 1. My box's IP where Asterisk is running has IP: 10.0.0.101 Line 1 - tab has: SIP Settings Port: 5060 Nat is

Voxilla news story: http://voxilla.com/voxstory84-nested-order0-threshold0.html Two new products * A Sipura 2000 in a linksys box: Linksys PAP2 Phone Adapter * A combination NAT router with 2 FXS ports: Linksys RT31P2 Broadband Router Jim James H. Thompson jht@lava.net