similar to: four wildcards in a single pc

I'm going to install asterisk with four digium cards. Can anyone mention a brand that carries boards with 4 compatible pci slots? Thanks Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

Shoval, Interesting Mention. I agree, most people don't have CO exp. And I wish daily I had enough. Understand that what I mean by my e-mail is consumer side FXS ports, in broader terms, I mean, customer picks up a phone line, it signals a channel bank which signals *. 24 of those channels. Not channels equipped to Send Signal to the CO that a loop has been made.. meaning FXO. 24

Say I get an ADIT 600 with two FXS8A and one FXO8A from ebay. a. Is it good for Asterisk? b. How do I connect the extensions and lines to it? Do I need a special jack? Can I get that jack in every corner? c. where can I find help for configuring it? d. what kind of backup does it have? Does it need to be reconfigured after a power outage? Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd.

Hi all. Can anyone comment why shouldn't we use FC 3 for an * production system? I'm not looking to start a distro war, but we just found out that redhat 9 (and FC 1) don't support SATA drives, and apparently FC 3 does. We are only familiar with red hat and are in a point in time that switching distros is not available. The guy installing the system is already on location. Yes, I

How do you suggest doing that? How can I convert wav files to gsm files? thanks Shoval Tomer, MCSE IT Manager Softov Advanced System Ltd. Email: shoval@softov.co.il Mobile: 972-55-229220 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031102/f84d7805/attachment.htm

Hi all. Can someone recommend a good UPS for using with an * machine that provides some linux tested software to do managed shutdown in case of power loss? Thanks. Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

Is there a service like iconnect that does allow dialing out more then one concurrent connection? Asterisk works great with iConnectHere, but they only allow one call at a time. I don't want to setup an account for each concurrent call, because it will make iConnect an expensive service, and besides, all of our calls combined doesn't reach 1000 minutes per month. Any ideas?

Is it possible to use * as a VOIP gateway? Can I connect asterisk to one of the trunks on my current PBX and on the other side of the world connect another * to the trunk of another regular PBX - is it possible to transfer calls from here to there? I guess I'll need one port FXO card for each asterisk, but I can't figure how to configure the thing. I know I'll need to

Hi, Anybody have an idea how to integrate * with a Panasonic td-1232? We one at the main office, and are installing * in a branch office. We'd like to be able to make calls from * extensions to Panasonic extensions and the other way around. Making outgoing calls from extensions one one side to lines on the other would be nice too. I can put another * machine at the main office, but what is

I'm looking to add a single FXO port to my Asterisk box. It looks like my options are a Digium Wildcard X100P off eBay for $6.99, or a Wildcard TDM400P with an FXO Module from Digium for $125. Can anyone explain the tradeoffs (other than the ability to put 4 FXO/FSO modules on the TDM400P). What about RTC for the system - I know the TDM400P provides it. Does the X100P? Thanks!

I have several Linux machines some running on really old hardware and some on brand new, some run old distros (RedHat 6) and some new (FC3 or CentOS). All of them experienced power failure more then once, none of them has failed to load after a reboot. BUT, Asterisk is running your PBX. Your PBX isn't your proxy server, it isn't your web server, mail server, firewall, or whatever

Hi, Where can I find a complete * manager api guide, the one one wiki is missing informations like the monitor function for example, Thnx Serge

Hi, We've got IAX softphones, GrandStream VOIP phones and zaptel connected analog phones. Caller id, internally, works just fine (as long as I use numeric only callerids) for IAX and grandstream. Is there a way to have the analog phones' LCD display show the caller id? These are plain old regular analog phone, that if I had callerid from my telco would show on the screen. thanks

We've bought the G729 codec for lowering SIP bandwidth usage (we're using grandstream phones) and we're quite happy with it up until I tried using IAXPhone 0.2.0 build 116 with my asterisk 1.0.0 installations. Weirdly enough, calls from IAXphone to the GS phone work just fine. So are calls from both phones to voicemail. And from both phones to analog phones connected to FXS ports.

I was looking for something to connect a couple of POTS handsets to my asterisk server and found this on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=162&item=5162868118 &rd=1 The documentation says that it does SIP - therefore will it work in an asterisk environment. -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus

Hi. I've searched the archives and found nothing regarding collaborating Asterisk with a Panasonic PBX (TD1232 to be exact) Here's my question: Can I use a Wildcard X100P to connect an outgoing line jack (on the Panasonic) to Asterisk, so I can route calls from the PBX to Asterisk, and calls from Asterisk to the PBX? On the hardware page for the X100P card is says it's great for

I'm looking for an ISDN card that will work for me using either the i4l or capi with asterisk under Linux. I'm in the US, so I need an ISDN-U interface. Can anyone tell me if this card will work for me? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=14922&item=6700879965&rd=1&ssPageName=WDVW There are a lot available, and for what seems to be a good price, if

Hi. A friend of mine came asking about this VOIP provider. I haven't heard of them so I thought I might ask the list. Anyone has any experience using them (http://www.optonline.net/Home, http://www.optimumvoice.com/index.jhtml)? Not just with Asterisk, even with their supplied HandyTone and a regular analog phone. Thanks -------------- next part -------------- An HTML

I've set up asterisk with my X100P as a home answering machine. Works great so far - answers the phone after 20 seconds, runs the phone tree, emails voicemail, etc. However, the one feature traditional answering machines have that I haven't been able to figure out is how to listen in on the call. Ideally I could just route through Console/dsp and hear it on my speakers. I've tried

Hi, I'm having two problems. First - I'm using the xten x-lite program to communicate with asterisk, and everything works fine except that DTMFs are not transferred. I've set DTMFMODE to inband on both the sip.conf file and the x-lite configuration, and still it doesn't work. Anyone had this problem before>? Second thing: I get a WARNING:[1209214400]: File dsp.c,