similar to: Asterisk & Gossiptel - 1 way audio???

Hi, Has anyone got Gossiptel working with Asterisk? - I am having real problems getting it to register - i'm just getting timeout errors. Thanks --ian

hi there, i run asterisk 1.4 on my debian machine, which is in my internal 10.x.x.x network, behind my main computer, i cam make call, receive calls, all works fine, with all providers except sipgate.de, there i can receive call and make them, i can hear the other end but they can not hear me, this is only the case with sipgate.de i don#t know how to configure it and thought maybe someone can help

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

I have no analog line interfaces on my asterisk system, but I do have two UK 0870 numbers routed to two separate VoIP accounts (one with FWD, one with gossiptel). Asterisk is configured to register with these accounts. I get voice calls through just fine this way. I thought I could get one of these 0870 numbers to route through to rxfax, thus allowing folks to fax me directly. I've set up

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

This configuration solved my problem. I could have sworn I tried this before. I guess not. I did not need to apply the patch. Also, I am using a regular Registration setup in my sip.conf not broadvoice's funky one... The only thing I can surmise is that order of the variables matters. This is what worked for me: [PPPPPPPPPP] type=peer user=phone host=sip.broadvoice.com

Hi all, I have two sipgate accounts (numbers), if I have both accounts register only one will work for incoming calls (which is all i'm interested in). However if I disable either account the other account will work perfectly. Am I missing something obvious? Thanks in advance, Ray. Excerpts from sip.conf - [general] 8<---- SNIP! ---->8 Register => 1212121:aaaaaaaa at

I've been googling and talking with Libretel about my setup and the fact that incoming calls to my asterisk box through the Libretel number reach my box (I hear the greeting being played) but then don't accept DTMF. Here is a rough diagram of my setup: Asterisk | server | NAT <------------ Libretel | router | Note that there are NO SIP

I have downloaded and installed Asterisk@home and I have installed X-Lite on my Windows machine and I am able to connect it to the Asterisk server. I went ahead an created an account on Broadvoice today and followed the directions on http://voip-info.org/wiki-Asterisk+settings+Broadvoice and http://foo.robotics.net/mediawiki-1.3.10/index.php/Asterisk_Setup but when ever I try and make a call from

Hello all, I'm having a quite simple configuration like: SIP provider <=> asterisk SIP <=> lan Everythings works fine but sometime I can't get incoming call. here are some of the logs from set debug 25 set verbosity 25 sip show debug and sip.conf and a part of extension.conf thanks in advance Reliably Transmitting (NAT) to 212.27.52.5:5060: OPTIONS sip:freephonie.net

Dear all, I have an asterisk sip issue which I don't believe is unique. I use a registrar (sipgate.co.uk) where I have 3 different accounts. These accounts provide me with three seperate local phone numbers which allow me to allocate them to seperate users. By using just one of these accounts I can set asterisk up to send and receive calls no problem. However, when I start to introduce an

I have tried everything to get BV working outbound. All worked fine until the BV change last week. I called BV and they changed me to sip gen with a new password. I stripped my Asterisk server to one phone on Zap/1 until I get this working. The same BV account works fine with a SPA-3000 so I don't suspect a firewall problem. Symptoms: Asterisk registers with BV Ok Incoming calls work

I have written this configuration script which uses OpenSky to make Skype calls directly from Asterisk devices using my companies SIP to Skype gateway. Users can dial skype_anyskypeusername or manually add names or extensions which can get mapped to the correct dialing sequence. The right sequence is username at opensky.gizmo5.com but that gets mapped to sipphone address so I set that up to map

It gets hard to read my logs when every time someone makes a phone call it displays long pages of "Dropping voice frame". Anyone encounter this before? Asterisk is bridging two SIP lines together, so the technology should be the same. Maybe I'll try allowing only ULAW. ************************************** Asterisk Standard debug (level 3)

First of all Merry Christmas. Second, my first problem with my provider not staying registered with our server was my fault. We moved our server room and I restarted the test system and the production system causing them to ping-pong back and forth registering with our provider causing random problems, they are both set to register with the same account right now. I shut Asterisk down on

Hi everyone, I have a number of SIP registrations going fine, but am trying to get a new provider going, and they have no sample Asterisk SIP config. They have been helpful, but keep falling back to the way they "think" packets should be flowing, and I've been trying to figure out how the Asterisk config should look like to get the SIP packet to look correct. Now, they say that

My only problem now is this: I have a broadvoice number that I can dial out on, and i ncomming calls word fine. Once the ip phone handset picks up, the audio bi-directionally is perfect. The problem is the audio BEFORE the handset picks up is silent on the broadvoice side. The user calling in over the sip number doesnt hear the menu, or even the ringing. Once the handset picks up then

I got no resonses to this and some funny bounces so I'm trying again. First of all Merry Christmas. Second, my first problem with my provider not staying registered with our server was my fault. We moved our server room and I restarted the test system and the production system causing them to ping-pong back and forth registering with our provider causing random problems, they are both

Hi, I'm making some tests with Tellfree brazilian provider. I'm using 2 users A and B, one for calling and the other to receive calls. When I make a call I can see (from the CLI console) user A is calling user B but user B does not answer (the phone continues to ring) even if the "sip show registry" command says user B is registered. In my sip.conf I have: register =>

(udp/5060, udp/2727, among others). One way to tell for sure would be to run 'lsof -i' which would show you the process associated with the port. As far as the call not reaching asterisk or being a firewall issue, one way to tell might be to start a tcpdump just prior to making the incoming call. Something like this: tcpdump -n 'port 5060' That would show the connection