similar to: Ring all Configured Extension

I am having a problem with Polycom auto-answer. I have the auto-answer working between PhoneA and PhoneB, but when I try to use the intercom between more then one phone I start having problems. PhoneA dials *3 which calls PhoneB, PhoneC, and PhoneD. All the phones ring, but only one will pick up, the rest will hang up and I get this error on Asterisk: Got SIP response 500 "Internal Server

I have a simple 4 person ACD queue using the AgentCallback function. No matter what strategy I use, anytime someone calls into the queue asterisk dials the agents in the order that they are listed in the agents.conf file. This doesn't seem right to me, or am I wrong.

I don't know if this is possible, so I will let the collective decide. Here is what I would like to do. BossA calls BossB, BossB's admin assistant sees the call from BossA on her phone. CallerID would look something like: BossA to BossB : on her phone. And she would be able to pick if BossB was not in his office. I am sure this is possible, but I do not know where to start, or even

I have spandsp installed and working, but when it emails using Scotts mailfax, the attachment is a dat file. I tried to rename the file to .tiff or .pdf, but it will not open. In the /var/spool/asterisk/fax folder, that faxes are there as tiffs, and I can open those without any trouble. The problem is in the conversion from tiff to pdf. Is there another package that needs to be installed for

I had asterisk 1.0.5 running fine. I upgraded to 1.0.6 and now the music on hold does not work. More Detail: While I was running asterisk 1.0.5, when someone called into an Polycom IP500 and was put on hold via the Polycom "Hold" button, the hold music would play. After upgrading to 1.0.6 that does not work. But if I set up an extension to play the hold music, it plays.

My school district will be building a new elementary school in 2006. We were about to go to bid with a traditional intercom system for the campus but I would like implement Asterisk at the campus. My question is, do we build in a traditional intercom/paging system and tie that into the Asterisk PBX, the way such intercoms have been connected to other PBX's in our district in the past, or

I searched and read all the relevant posts, but I still don't have a solution to my problem.. I've got a small queue for tech support calls using AddQueueMember. The agents are using IP300's from polycom. In my example, only one agent is logged int. When a call comes into the queue, asterisk sends the call to the one agent logged in. The agent answers and is talking to the

Hi, Does anybody know of a VoIP compatible doorbell or door intercom unit? I've contemplated buying a cheap SIP phone, ripping it apart, and putting it inside an IP66 sealed unit... It would need: - At least one speed-dial key, or some way to make every button dial the same extension number - PoE (power over ethernet), so I can power it off the central switch - cheap enough to rip apart

Since Thursday evening my asterisk box has been failing to register with broadvoice. I haven't changed any of my config files in the last week. Can anyone suggest anything? Asterisk is reporting: *CLI> Aug 28 16:15:17 NOTICE[6150]: chan_sip.c:3914 sip_reg_timeout: Registration for '703XXXXXXX@147.135.8.129' timed out, trying again -- Got SIP response 404 "Not found"

Hello All, I am looking for a way to do priority call ringing. That is when a caller places a call to another party, they can indicate that the call is a priority and get a different ring to occur (ring cadence) on the called parties phone. This would be synonymous to an intercom ring on a key system. After some investigation, I have come across the ability of the GS BT101 which will ring

There was a thread a few months ago that tossed around some ideas for using a cisco phone for intercom or paging. I don't have any ip phones, and wondered if anyone had any luck getting intercom or paging to work on the cisco units. Do any of the (cheaper) ip phones have a way to support intercom or paging? I presume that it's not part of the SIP or IAX protocols. Chris.

Is there anyway to force an autopickup on a cisco 7940 / 60 from the dialplan ? My problem is that I am originating a call from the AMI, with the internal user being called first, and then connecting to external user. However, sometimes the internal user doesn't pick up the phone, so the call is never placed. I need to know the results of the call so I need to be able to either a) get

Today I released Enhance Me 1.004 for AMP 1.10 and Asterisk @ Home 2.2. These utilities allow for speed dialing, a revised version which uses AMP to store speed dial numbers and NAMES so that only operators of the web interface can add and delete speed dials. Data is stored in mysql instead of Asterisks' DB. This stops the waste of the 300 series extension numbers. Instructions on

Here is the link.. http://sourceforge.net/projects/enhanceme _____ From: Paul [mailto:paul@siliconvp.com] Sent: Wednesday, January 11, 2006 4:48 PM To: 'asterisk-users@lists.digium.com' Subject: Enchance Me 1.004 Released! Today I released Enhance Me 1.004 for AMP 1.10 and Asterisk @ Home 2.2. These utilities allow for speed dialing, a revised version which

Hi All... I'm trying to get the intercom feature working on some snom 190 phones but having no luck... As you can see from the SIP trace below (from the called phone), intercom=true is being appended to the To: header as per requirements. I've email'd snom a few days ago but have yet to get a response. On my 190s, im running snom190-SIP 3.57v. I am pulling the config for the

Hello all, I noticed that Cisco claims that you can do station to station intercom with the 7940/7960 phones, and the Cisco Call Manager. Does anyone have an example SIP header that shows this in action? Or is it something else that triggers the intercom? I would like to add this in to *. Thanks, Mike

Environment: Asterisk 1.2.14, FreePBX 2.2.0, Aastra 480i IP telephones firmware version 1.4.1.1077. Problem: Intercom feature: the dialed phone does not play the splash tone when auto-answering an intercom call. Otherwise, intercom works perfectly. Questions: What is the extensions.conf syntax to trigger a splash tone in Asterisk 1.2.14 (from the documentation and posts I've found, it has

Hi all, I have asterisk 1.4.26 (and I tried 1.4.29) connected PRI all 23 lines and for the most part everything works. Dialing out on 23 lines to phones works fine. I have to use the Local channel to call the intercom system (from call files). If I only call 1 intercom system at a time so it uses DAHDI/1 everything seems to work as I can call all 8 intercom systems and play a message. The

Hello all, I'm having a problem with my intercom function that I use for under-chin paging. I'm running 1.6.2.13 on this server, and we use Linksys SPA-942's for our general phones. I have a global defined which has all the SIP channels concatenated together - this is ${ALL-PAGE-EXTS}. The problem comes when a user is on the line, and someone else uses the intercom function to page

Hello I just read this article about a kid in England who built a box with a 3G SIM card: www.dailymail.co.uk/sciencetech/article-1394448/Doorbell-tricks-burglars-thinking-youre-home-invented-schoolboy-Laurence-Rook-13.html When someone rings your intercom, the box will call your cellphone so you can answer just like you were home. I don't know anything about electronics and would like to