similar to: Separate list for political/philosophical discussion

Hi, I'd like to put my servers' config files in cvs to make it easier to manage (yes, I know about Cfengine). I've been looking for a tutorial and I could find any, and since I'm not a CVS guru, I tried a few things, without even knowing if I'm doing it right. Any hints? Regards, -- Ugo -> Please don't send a copy of your reply by e-mail. I read the list.

Hi, I need to test one specific port on a serie of Ip addresses that I own, I thought about using nmap or telnet, but both return the same value, no matter if the port is open or filtered. Anyone has an idea, before I start scripting to analyse the output of the command? Regards, Ugo

Hi, Just updated a few servers to U7, and rebooted them. I found out that crond would not start at boot even if it is configured to: crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off I have tested another reboot, same thing: I had to start crond manually. I don't see anything in the logs, and I don't have direct access to the console right now. Anyone seen the

Hi, I have a cronjob that executes a script that has some echo statements in it and the commands in it also generate output (it copies files, reloads services, etc...). Recently, cron stopped sending its output by e-mail. I restarted cron, without success. Any ideas where I shoud start to debug this? Regards, Ugo

Hi, I'm running CentOS 3 on a Dell celeron 500/256 MB. It won't boot without a keyboard and that is a problem for me. I know it is not a perfect setup, but I'd like to have it boot w/o a keyboard. The Bios doesn't seem to care too much about the fact that no keyboard is plugged in, as it loads Grub and starts booting the kernel. It hangs, usually around Total HugeTLB memory

Hi, What I have: - One Win2K server (Exchange, Print and File sharing). - One CentOS server I'd like to transfer the "Print and File sharing" task from the Win2K server to -- Ugo -> Please don't send a copy of your reply by e-mail. I read the list. -> Please avoid top-posting, long signatures and HTML, and cut the irrelevant parts in your replies.

Hi, I'm about to setup a CentOS4 server to install VmWare Server on it. Then I'll run 2 main guest OS, Microsoft SBS 2003, and a CentOS development LAMP server. Except from the clock settings, is there any problems/comments? Regards, Ugo

Hi, I have 4 disks and I want to have my swap, / (root), /boot on the 4 disks, RAID1. I successfully managed to get /boot and swap on the 4 disks, but I can't get / on the 4 disks. It is only on 2 right now. I cannot umount /, so how do I do that? Boot in rescue mode? RAID 5 is not an option for now. -- Ugo -> Please don't send a copy of your reply by e-mail. I read the list.

Hi, Would it be possible to make this list accessible from gmane? www.gmane.org. Regards, -- Ugo Bellavance (ugob@lubik.ca) Consultant en Sécurité Informatique Lubik Inc. Site Web: http://www.lubik.ca # Tél.: 514-907-3253 # Sans Frais: 866-507-3253 # Fax.: 1-866-334-1426 Protection de courriel par LastSpam (www.lastspam.com)

Hi, I was wondering what would be the best way to learn AIX, Solaris, or HP-UX, for someone who knows Linux very well? Books? Courses? Self-teaching in a home lab? Thanks, Ugo

Hi, I have a Polycom 330 that emits a beep every 30s or so when there is a message waiting. Is there a way to disable that? It is pretty annoying. Regards, Ugo

Hi, I need to set up a small server for a group of ~10 employees (all using Windows 2000/XP, used to use a windows 2000/exchange setup). I have a linux server already running CentOS 4, so I'd like to do all I can with this. I thought about using Samba for file/print sharing and OpenXchange (commercial version) to have a nice collaborative/mail/calendar/etc server. Of course, it would

Hi, Anyone tried netcell products on Centos 3 or 4? They claim driverless operation under WinXP, but in linux the only doc that is related with CentOS would be the Fedora core 2 (http://www.netcell.com/support/Fedora_Core2_readme.txt) and requires a kernel rebuild. I'd like to know if it would be possible to install CentOS directly on drives on such a card, without needing a build

Hi, I have a dual core athlon server and it is gaining 1 day every 2 days w/o time sync. Even with ntpd running, the time is not under control. I must put a very frequent cronjob of 'ntpdate' to keep the time under control. This creates big problems since winbind eventually stops working so my users can't access their data. Any ideas? -- Ugo -> Please don't send a copy of

Hi, I want to put on the wiki a tutorial I wrote about Cacti on CentOS4 My UserName is UgoBellavance Regards, -- Ugo Bellavance (ugob at lubik.ca) Consultant en S?curit? Informatique Lubik Inc. Site Web: http://www.lubik.ca # T?l.: 514-907-3253 # Fax.: 1-866-334-1426 Telephone IP (SIP): ugo at sip.lubik.ca Protection de courriel par LastSpam (www.lastspam.com)

Hi, I'm trying to implement this: I have: - A windows 2000 server - A centos 4 server - Monday, Tuesday, Wednesday, Thursday, Friday, Monthly. The tape drive in the windows server died recently and I decided to switch to USB external drives. However, the USB controller in the windows server is only 1.1, so it is very slow. I didn't want to install a 2.0 USB controller in the

Hi, 2 of my Centos4 servers are showing weird behavior. [root at server1 ~]# du -sh /var/ 1.8G /var/ [root at server1 ~]# df -h /var Filesystem Size Used Avail Use% Mounted on /dev/sda7 4.3G 3.9G 181M 96% /var [root at server2 var]# df -h /var Filesystem Size Used Avail Use% Mounted on /dev/sda7 2.9G 2.7G 0 100% /var [root at server2

Hi, I''m not a total newbie with puppet, but I only use it for a few things and I''m not even using modules yet, mostly because I only deploy configuration files for now. I have a configuration for NTP that looks like this: class ntpd { package { "ntp": ensure => installed, } file { "/etc/ntp.conf": owner => root,

Hi, I'm trying to do a remote port forward, and the remote hosts only listens to 127.0.0.1 on the forwarded port. [ugob at server ~]$ netstat -ln Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:5500 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5666

Hi, What are the requirements to have puppet agents on windows servers? I have 2003 R2 and 2008 R2 servers, 32 and 64- bit, Puppetmaster 2.6. What are the types that can be used on Windows? Is it production-ready? Thanks, Ugo -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit