similar to: Eicon ISDN to Voicemail audio dropouts

hi all I keep getting 'bzzt'-sounding dropouts, but I've only heard them when from behind NAT. I don't think it's related to bandwidth, as I'm on a 2400/640 ADSL line. I'm currently using ALAW. Any ideas how to debug this? SIP DEBUG doesn't show me anything when dropouts happen, although I'd doubted it'd do so... How can I debug the RTP part of SIP?

Dear all, I'm planning to buying Eicon Diva Server V-BRI for my asterisk server and run with chan_capi. Is anybody using that card ? Would appreciate any feedback. Bartosz

Hello, I'm thinking of deploying Asterisk. I already have a handful of EICON Diva 2.01 PCI ISDN cards. I was thinking if it's possible to insert 4 such cards to my PC-Asterisk server (which I yet have to install) and use them as 4 lines in case anyone has to call me in / I have to call out using ISDN line(s)? Any reply appreciated. Tomek

I just wanted to let you know that it's possible to use Eicon DIVA PCI 2.01 ISDN cards (not "server" divas) with asterisk. First thing to do is to load the module. If you have two of these cards, you should do it like that: modprobe -v hisax protocol=2,2 type=11,11 And now you can have up to 4 incoming calls with two cards (try calling yourself and see if anything gets into

Hi I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can use all 4 lines for out going calls fine, but on incoming we can only use 2. On calling in using the main msn, the 3rd line gives a an engaged signal. I have unplugged 1 of the cards, and the other card takes the 2 calls. I then swapped this around, and this also works fine. But when using both cards, we can only use

Hi, > >... > >drivers/isdn/capi/kcapi.c:1014:47: error: macro "INIT_WORK" passed 3 > >arguments, but takes just 2 > >make[2]: *** [drivers/isdn/capi/kcapi.o] Error 1 > >make[1]: *** [drivers/isdn/capi] Error 2 > >make: *** [_module_drivers/isdn] Error 2 > >#+ LOG INFO: pwd:/usr/lib/eicon/divas/src > >#! LOG ABORT EXECUTION DUE TO

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

Hello, I have installed an asterisk server with 7960 sip phones and an eicon card (diva 4bri server, I use only three channel) using capi channel. Everything seems to work fine, but from time to time (two or twice a day) during a call I get a capi error in asterisk log and asterisk doesn't work anymore: ==== Apr 1 10:38:24 ERROR[20495]: File chan_capi.c, Line 738 (capi_write): error

I have time-series data from a pair of inexpensive self-logging 3-axis accelerometers (http://www.gcdataconcepts.com/xlr8r-1.html). Since I'm not sure of the vibration/shock spectrum I'm measuring, for my initial sensor characterization run the units were mounted together with the sample rate set to the maximum of 640 samples/sec. Unfortunately, at this sample rate there are significant

Hey guys This is probably for Armin, but I thought maybe someone else might have something I could try. I'm having a problem with one of my Eicon Diva V-4BRI cards and I'm trying to work out if its a driver configuration error, card failure or telco problem: I have an Asterisk box running -- the Eicon drivers see all four ports on my card, capi.conf is configured with all four ports

Hi; I've got an AAH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter

Hi all, We have recently implemented an Asterisk system using Trixbox (asterisk v1.4.4 at the moment, yet to move to 1.4.9) but are getting pressure to switch back to our old key system unless we fix two major issues. So please help me avoid switching back! An overview: We have about 12 Linksys SPA941 SIP phones connected on a private switched network to our asterisk box which is a

I have just acquired an eicon diva server BRI-2M card for using with asterisk and hylafax. Of course i installed it in a new server with Debian Lenny wich has a kernel 2.6.26+ I have downloaded the latest drivers (9.0) from the Eicon web site and i'm having trouble compiling them, specifically the divaTTY driver i need to use with hylafax in the same server. On the icon web site there is a

Hello everyone, I'm having some errors while compiling the source code for an Eicon Diva BRI card. I am using Fedora Core 6 with a compiled from source Linux kernel 2.6.19. I have downloaded the Eicon Diva source RPM (divas4linux_EICON-106.12-1.i386.rpm) and installed it already. When I go to /usr/lib/eicon/divas/src/ and run ./Build, everything starts correctly until that part where it has

Hello, I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing

Hello, I want to use a 4 port ISDN card from EICON/DIALOGIC in our asterisk server. The system is a Ubuntu 7.10 with kernel 2.6.23.1. The compilation of the kernel finishes without any problems. I have downloaded and installed the deb-source package that EICON/DIALOGIC offers. Th installation script crashes with the following error messages: # LOG ---- START SECTION read kernel version

Hello all, I am trying to set up asterisk and hylafax to send and receibe fax. The machine is connected to the PSTN is an Eicon Diva BRI (1 BRI port). My problem is that , when I send a Fax from the PSTN to this machine, the asterisk or diva or hylafax, does not detect this call as a fax and asterisk answer that call like a voice call. How sould I configure the software modem (iaxmodem) to use

Howdy all... When making SIP calls through my X100P from X-Lite to the PSTN I'm getting 3-5 second dropouts in both directions. I've tried ulaw and GSM, but that doesn't seem to make a difference, and the * box is on my local net. Here's my hardware: Celeron 2.4GHz, 512MB, Slackware 9.1, 2 X100P, 1 T100P. Any ideas what could be happening, or pointers as to how to shoot this

Hello Marc, Could you post the install details for the Diva PCI? I have a Diva Pro PCI 3.0 and I am looking to get it working... I am running Debian Testing. So far it appears there are a few things floating around but I am not certain which direction to go. I know I need to load the firmware first. I did manage to load the modules ok. Thanks, Greg -----Original Message----- From:

Hi there, I am using bri-stuff.0.1.0-RC2k and it seems that things didn't become better. I have got lots of dropouts on the IAX2 link (no matter if jitter buffers are enabled). Further the MP3Player application does not playback streams like http://somestreamserver/somestream. It stops saying: -- Executing MP3Player("SIP/27870-ba4f",