similar to: Grandstream BT101 stops ringing

Hi, When we use BudgeTone-100 in our Intranet together with our Asterisk IP PBX everything is working OK. When we try to use the phone behind the Firewall we can't do the connection. When I try to use STUN Server: 128.107.250.38 there is no result. The only way in which I have audio from the one direction (BT-100 to Asterisk) is when I leave blank STUN Server and specify the IP Address in

On Thu, March 5, 2015 09:56, Ruben R?gels wrote: > > Hi again, > > I'm glad to hear that I provided a somehow useful answer. > > Unfortunatelly, I don't know these details. > If you wasn't lucky consulting the snom docs, maybe the snom support > can be helpful with information about the exact implementation > details. > > You also could use "sip

I just downloaded the zip file from grandstreams website to upgrade my gxp2000 firmware from 1.0.0.3 to the latest but seems there are some files missing on the zip file... Anybody been able to upgrade their firmware? My website shows this files as missing: 201.133.125.152 - - [11/May/2005:16:47:16 -0500] "GET /firmware/ring1.bin HTTP/1.0" 200 12737 "-" "Grandstream

If you wan't to create a ringtone with makering.pl for firmware 1.0.50, be sure to create it as ring.bin and then rename it to ring1.bin / ring2.bin or ring3.bin. This seems to be the only change between the format from 1.0.4.68. Regards, Maron

http://www.kerneltraffic.org/kernel-traffic/kt20031201_243.html --- Relevant section --- Nuno Silva mentioned: The good people at Cambridge made a (very nice) VMM that exploits ring0/1/3 to let one machine run various kernels independently (the kernels need to be ported to the xen arch). Xen itself executes in ring0 and the "guest" operating systems execute in ring1.

Got one weird one and one prob easy one. 1. I have upgraded our BT101's to Program--1.0.5.0 Bootloader--1.0.0.17 HTML--1.0.0.34 VOC--1.0.0.6 after doing this i have some phones on different subnet's ie 255.255.255.248 or .192 or .252 and i am now unable to login to these phones from different subnet's . I have one at home which is on a .248 ( Using an external IP for the phone )

I can't seem to make the "Hold" button function on the GS BudgeTone-100. I'm trying a procedure like this: 1) On a call 2) Press "Hold" button 3) Hang up phone What I expect is for the call to go on hold until I pick up the receiver again. (Like my SPA-2000's, except it's a flash, but I can hang up the phone and the call waits there for me to pick it up

Hello all, I tried to set up some cisco 7912G phones with asterisk with not much success. Can anyone give me some tips on this one ? Is it better to use SCCP or SIP ? Where can I get a SIP software image ? Regards Kiss Karoly

On Thu, March 5, 2015 05:30, Ruben R?gels wrote: > > > Am 05.03.2015 um 01:09 schrieb James B. Byrne: >> I am trying to determine how the transfer button on the Snom-870 >> works >> with Asterisk. Is the ## special code employed as when it is >> entered >> through the handset or is the blind transfer through the phone >> function accomplished in a

In the following scenario, the user calling from a SIPphone registered phone is able to transfer the called user to another extension. sip.conf: [general] port = 5060 context = from-sip register => number:password@proxy01.sipphone.com extensions.conf: [from-sip] exten => s,1,Dial(SIP/111&SIP/117) exten => 111,1,Dial(SIP/111,20) exten => 117,1,Dial(SIP/117,20) 1. The calling user

Hi, I am wondering if anyone has gotten the BT101's to work with the paging in Asterisk? I know that the phones themselves have an auto-answer option and if I turn it on every call is auto answered. I want to be able to call the extension normally and have it ring normally but if someone dials # and the extension to have it auto answer for intercom purposes. Anyone have this working?

SIPAddHeader(Alert-Info:\;info=ring3) In the phone config add the value "ring3" and select Account # / Call Settings / Match Incoming Caller ID (Matching Rule) In the first rule place the word ring3 and select your ring tone. This will cause the selected ringtone to be used when calls with the info value of ring3 is matched Bryant Zimmerman (ZK Tech Inc.) 616-855-1030 Ext.

I know this must have been asked before, but I was just wondering, the manual says it can do attended transfers, has anyone gotten this to work successfully? How did they do it? Is it possible to do attended transfers with the 'T' dial option? If so, how? -Chris Chris Shaw IS Manager Water Tech Industries Phone: (888)-254-8412 Fax: (503)-261-9118 E-Mail: chriss@watertech.com

Hello, We found out that after upgrading the firmware in our GrandStream BudgeTone phones, that we were not able to transfer calls anymore. We use the BT's own tranfering mechanisme. We can dial the phone where the call should be tranfered to. But after that, the original caller stays in music on hold on the server and there's no way to get the calling channel back again (not to the

I've done all the googling I can on this, and have come to the conclusion that a Grandstream BT101 can be abused to be a door phone. Could someone with access to one, confirm that the following is possible? Researched: 1. When set to auto-answer, dialing the phone will result in a short beep and instant speaker-phone connection. 2. When pressing the "message" button while

I have just successfully got the TFTP file remapping to work such that I can have unique ringtone files for each and every extension. I added the following to my server_args line in the xinetd configuration for TFTP: -m /home/asterisk/grandstream/ringmap.cfg Now the entire line reads: server_args = -v -s /home/asterisk/grandstream -u asterisk -m /home/asterisk/grandstream/ringmap.cfg (There

Hi list, someone has successfully change different ringtone from dialpan with asterisk with this model Granstream? for example: exten => 0,1,Playback(pls-wait-connect-call) same=> n,SIPAddHeader(Alert-Info:;info=ring3) same=> n,Dial(SIP/310&SIP/318,30,t) can not get it to work any idea o tips? regardss -- rickygm http://gnuforever.homelinux.com

Hi, I'm using asterisk 1.2.1 on a debian sarge distro. I've followed notes in http://www.voip-info.org/wiki/view/Polycom+auto-answer+config and http://www.voip-info.org/wiki/index.php?page=OptiPoint+600+SIP+-+Distictive+ring+using+ALERT_INFO but I still cannot change ring style via asterisk using exten => 666,1,SipAddHeader(ALERT_INFO="ring3") in extensions.conf . Is it

Anyone used this ? I am having a bit of trouble got the right perms on makering.pl . Should that file be somewhere in particular ? use the reccommended command sox inputfile -r 8000 -c 1 -t ul - rate | makering.pl ring1.bin but i get bash: makering.pl: command not found Can ya help ????? Best Regards Simon Garvey

I've seen lots of stuff go around about Grandstream firmware levels (in my case specifically the BT101/102). I'm just wondering what the currently accepted 'best' firmware version is to use? After seeing stuff going around about buggy firmware I want to know what I'm getting into before upping past my current 1.0.5.11. It's relatively stable, and the last thing I want