similar to: ISDN (point to point) questions

First, here's what I want to do / what I have: X100P and a Quicknet PhoneJack. I want to be able to pick up the analog phone (connected to the phonejack) and dial another computer (with the same hardware) or just make a regular phone call which will be decided by asterisk depending on the phone number dialed. I know that this won't be taking full advantage of asterisk, but I'm

Recently, there're some posts about registration problems with this gateway. These are my observations using the latest firmware version 107a. a) The gateway will register all 4 ports if you're not using password. b) If using password, the gateway will only register the 1st port correctly. For the record, the 2-port 3502 doesn't exhibit this behavior. FYI.

hello everybody , i got a test setup with lanphone 101 connected to * and a welltech fxo 3802 also to * the extensions are configure so that i can dial from the lanphone to the fxo. although once on the FXO and having the dialtone, no of my dtmf dialing is being processed on the FXO. It keeps giving me the dialtone constatly. Everything is configured as outband DTMF (we

Hello asterisk-users, i got a simple read configured as an extensions command. it does not detect the dtmf digits all god 0123456789 gives something like 0223455789 what could this be the issue ? i'm using g711u law with inband. i tried to use outband but i got hardware like FXO's that don't support outband -- Best regards, Danny

Hello Asterisk, noticed that the mbrola really adds a extra dimension to tts; anyone got any experience with running this together with the festival and * ? -- Best regards, Danny mailto:dannyz@belgonet.com belGOnet.com a Euro-pictures division - internet solutions place princesse elisabeth 9/11 - 1030 Brussels - Belgium Tel : +32-(0)2-215.67.65 -

Anyone knows where can I find spandsp? Official site seems permanently down... TIA, Simone.

Hi,Andy Thank your very much! For the MLPPP LFI,I found that in Cisco configuration,it use "ppp multilink;ppp multilink fragmentation;ppp multilink fragment-delay 20;ppp multilink interleave " command to enable MLPPP LFI.So I think just realizing the same function on my linux router would be fine.But I got no idea how to do this on linux.So is there anything with iproute2?Would you

I''ve read through the nano documentation, and it says that it wont handle scenarios where the main traffic is input. Also, I''ve read through the linuxvirtualserver documentation, and i dont think that applies to me either, as that set up intercepts traffic and manipulates the final destination IP and port for the traffic. What I would like to do is 1) from the ISP standpoint,

Hi! Trying to set up NUT on Centos 5 to monitor a CyberPower 1500AVR UPS. There seem to be many documents, all of which seem to be not fully consistent with each other, and most of them aren't up to date. I'm guessing I should be using udev rather than hal, but I'm somewhat stumped on how to figure out what device it should be monitoring. there are a bunch of udev rules installed

hey * folk, am trying to configure a WellGate 3504A FXS SIP ATA (http://www.welltech.com.tw/products_ea01.htm) with asterisk. i've set up two SIP clients in sip.conf as follows: [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind SIP channel to context = default ; Default context for incoming calls [1235] host = dynamic secret = somepass context = default type

A little while ago I changed my UPS to Leibert and installed NUT. Everything worked as expected. Today I tried to use the MultiLink Viewer icon from the desktop, but it simply accepted the root password without apparently doing anything. I can run the viewer directly (as root) from a file manager. The icon is owned by me, but the application is set to run as root. I suspect that the

I'm looking at buying a NORCO DS-1220 and it comes with a NORCO 4618 PCI-X card (4 port eSATA, with a port multiplier on the card or the chassis). I've been trying to pin down whether or not CentOS will see all 12 drives, and I haven't seen anything that is definitive. I see that the kernel module sata_sil24 supports the SiI3124 chip on the NORCO 4618 card, but I haven't found

Hi, I've been trying (unsuccessfully) to interact with the above UPS using its USB/HID interface and have come to the conclusion that it's not going to be as "easy" as I'd first thought :( My attempts have all been on FreeBSD-5 (kernel as of today) using NUT v2.0.2 and fiddling with newhidups -- I tried the simple approach of adding the IDs and "seeing what

I see there has been some Liebert work here recently. I have a Liebert UPS that has no USB, just RS-232. I reverse engineered the ESP-II protocol, at least as far as normal MultiLink monitoring goes, which was pretty simple. The protocol provides a table of parameter types and index ranges. So, I can read and (if I dare) write the parameter tables. We might be able to share info between

Hola LLVMers, I'm looking to make use of the vectorization primitives in the Intel chip with the code we generate from LLVM and so I've started experimenting with it. What is the state of the machine code generated for vectors? In my tinkering, I seem to be getting some wonky machine instructions, but I'm most likely just doing something wrong and I'm hoping you can set me in

What is the simplest OS I can install in Xen, preferably Linux based, and don''t tell me MS-DOS :). I have installed a minimal version of Fedora, but I want something that is even less cluttered. I have looked at Minix, but it is not fully supported. I need something small, lightweight (doesn''t have to be multi-threaded or anything), that will run small C and Assembler programs

fauno <fauno at kiwwwi.com.ar> writes: > Etienne Dechamps <etienne at edechamps.fr> writes: >> (I realize that this means UPnP support could possibly be achieved >> simply by suggesting that the user spawn some standalone UPnP client >> process in the background from the tinc-up hook. That's not very >> user-friendly, though. Especially on Windows.) >

Proprietary by open source (sounds like a oxymoron) I am looking at doing a project that well use theora/vorbis/Dirac I am expecting to get why cant it play on my ipod/PMP? I am expecting to get you must be using some proprietary format? tom_a_sparks __________________________________________________________________________________ Win 1 of 4 Sony home entertainment packs thanks to

Hi All, We've got msidn configured: Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- mISDN_close: fid(3) isize(131072) inbuf(0x8fd5060) irp(0x8fd5060) iend(0x8fd5060) and running on Asterisk 1.4.21.2: pbx*CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0 Debug:0

On Fri, 20 Jul 2007, Chuck Rose III wrote: > I'm looking to make use of the vectorization primitives in the Intel > chip with the code we generate from LLVM and so I've started > experimenting with it. What is the state of the machine code generated > for vectors? In my tinkering, I seem to be getting some wonky machine > instructions, but I'm most likely just doing