similar to: zaptelrtc for 2.6.x

Hi to everybody, seems that I cannot load the zaptel modules: ztdummy says the following: [root@Hayabusa misc]# modprobe ztdummy /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register

I finally got 2.4 recompiled with RTC as a module: Module Size Used by Not tainted autofs 13684 0 (autoclean) (unused) acenic 241092 0 (unused) iptable_filter 2412 0 (autoclean) (unused) ip_tables 15864 1 [iptable_filter] e100 62340 1 rtc 9084 0 (autoclean) Here is my

Hi, ztdummy says the following: VoiceBOX:/usr/src/zaptel# modprobe ztdummy /lib/modules/2.4.18/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.18/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.18/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.18/misc/ztdummy.o: unresolved symbol zt_register /lib/modules/2.4.18/misc/ztdummy.o: insmod

zaprtc 'load' is failing on my machine (the make was fine, same output as other posts to this list) [xxx@xxx zaptelrtc]# make load sync modprobe zaptel insmod ./zaprtc.o ./zaprtc.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or

Does anyone know where to disable rtc support on redhat 9.0 using make menuconfig? I thought I disabled it but still got the following error when trying to make zaprtc: zaprtc.c:109: storage size of `rtc_irq_timer' isn't known zaprtc.c:719: storage size of `rtc_fops' isn't known zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but never defined make: ***

Hullo. Having found http://bugs.digium.com/bug_view_page.php?bug_id=0000875 I grabbed the original 0.0.1 and Dan's patch, and whilst it didn't apply, I was able to patch the zaprtc.c manually - the Makefile has changed a lot, and I wasn't able to understand the changes. (this is all on a machine that's never had any * on it before, and has a 2.6.5 kernel with a matching

I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards but neither will work in my DL360G2. The system will not even boot with either card in the system. Other PCI cards seems to work fine. I called Digium support and was told that there must be a conflict between the card and my Compaq DL360G2. I then moved on to ztdummy. I'm sure the

Kristian, I have 2 X100P cards but neither work on my Compaq DL360 G2. The system will not even boot! Take a look at my initial post and let me know if you have any other advice. Regardless, thanks for your post! ------------------------------------------------------------------------ - I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards

Any help would be appreciated as I am a novice trying to work around a difficult situation. This is what the zaprtc helpfile says: zaprtc, getting zaptel timing out of your realtime clock ======================================================== Make sure that you _dont_ have rtc support compiled into your kernel! INSTALL: make USE: make load REMOVE: make unload I interpreted this as

Hi, I don't have a zaptel device for conferencing. I read from the lists, that ztdummy and zaprtc need to be installed to get conferencing. I could able to compile successfully with ztdummy and when i receive the call it says, -- Goto (13732,s,1) -- Executing MeetMe("SIP/-08118800", "1234") in new stack == Parsing

I ran in to an almost impossible ability to run MeetMe on our poweredge. Our PE is a 4 proc with OHCI and we had no need to buy any PCI cards other than for running MeetMe. If you know how to recompile your kernel, recompile it and make RTC a module (its compiled in by default). Then you can use zaprtc as your timing source. Be sure to `rmmod rtc` before you `insmod zaprtc` because zaprtc is a

Any thoughts on the following? I am running asterisk from CVS (downloaded yesterday's version, just to be sure) on a test system with no digium cards in it, so I have installed ztdummy (see logs and screenshots below) as a timing source. When I call the music on hold extension from a Sipura Sip connected analog phone, I hear nothing and start getting Warning[98310]: chan_sip.c:674

Hello- I've been trying to scour both * and linux user group archives for a solution to this particular problem, but I am just plan stuck. I got the latest zaptel sources from cvs, uncommented ztdummy.o in Makefile, ran make; make install then, did depmod -a. All is well up until now. When i do modprobe ztdummy, i get this error: dv@sidetrack:/usr/local/src/zaptel# depmod -a

I have successfully installed and configured the asterisk, the incoming and the outgoing calls are working fine, its a tremendous solution :) Now i want to enable trunking between two asterisk boxes, in the iax.conf i have put: [karachi] ... ... ... trunk=yes ... ... ... everything seems to work fine but when i load asterisk it says: -------------- Feb 17 10:59:14 WARNING[18726]:

Hi there, since I found a couple of reports with complaints concerning zaprtc I thought that one or the other user might be glad to know that it works indeed. All that was necessary was to copy all *.h files from /zaptel into /zaptelrtc and then do "make" followed by "make load". Of course you'll need to make sure to not have rtc compiled into your kernel, or loaded

Yes, I am a newbie too. I am having a problem with meetme. From what I have seen it will work without a Digium card but with audio problems. My goal is just to see how it works not the quality of the audio. When I dial into the conference room the following message is played: "That is not a valid conference number." On the console I get: "unable to open pseudo channel". As

I feel there is some unclarity about the need for a timer in Asterisk. As Asterisk moves into production environments, this needs to be sorted out. I'm setting up an Asterisk in a production environment with no Digium cards at all. It is planned to be used as a clean SIP hosted PABX, where we connect to the PSTN via gateways with proper echo cancellation. There is no USB driver on the card.

I have a system with no Digium hardware in it (two others with 2 X100P cards in each of them as well). I'm interested in using MeetMe in the one without the hardware (it works great in the ones with the hardware). I can't use ztdummy, because the system has usb-ohci drivers, rather than usb-uhci. I have read the little there is about zaprtc, and I am wondering whether there is a

Hello all, I am planning to setup a MeetMe conference functionality on Asterisk-1.4.13without having a Zaptel card. All users will be calling through SIP only. AFAIK, the said application needs a timer which makes use of the ztdummy module. I have basically two (2) problems I am encountering here that [1] I can't load the ztdummy.ko module and [2] Asterisk don't run when running it

Hi there, anyone has a suggestion about what do I need to do to solve this? Any comments appreciated. Philipp [root@asterisk]# modprobe ztdummy /lib/modules/2.4.22/misc/zaptel.o: unresolved symbol ppp_output_wakeup_Rd2dbbfe0 /lib/modules/2.4.22/misc/zaptel.o: unresolved symbol ppp_input_error_Rd2ca1e76 /lib/modules/2.4.22/misc/zaptel.o: unresolved symbol ppp_unregister_channel_Rb8cf9a74