Displaying 20 results from an estimated 600 matches similar to: "Update: Welltech Wellgate 3504A registration problem"
2004 Sep 08
4
WellGate 3504A with Asterisk SIP authentication and config
hey * folk,
am trying to configure a WellGate 3504A FXS SIP ATA
(http://www.welltech.com.tw/products_ea01.htm) with asterisk. i've set
up two SIP clients in sip.conf as follows:
[general]
port = 5060 ; Port to bind to
bindaddr = 0.0.0.0 ; Address to bind SIP channel to
context = default ; Default context for incoming calls
[1235]
host = dynamic
secret = somepass
context = default
type
2004 Sep 26
2
Asterisk <-> WellGate 3502a : ulaw/alaw only?
Greetings,
I'm running latest * from CVS on FreeBSD 4.10 box. We've just bought
several WellGate 3502A FXSes to play with till welltech guys fix the
3504a's registration bug.
So far everything is working as expected, except the fact only ulaw and
alaw codecs work with *. If I add allow=gsm or allow=g723.1 in FXS's
ports entries in the sip.conf, no voice is heard from both
2004 Oct 06
2
Working Wellgate *SIP* 38xx/35xx hardware anyone?
I'm loosing hair at cosmic speed now for the past 10 days.
Welltech's Wellgate 38xx/35xx FXO/FXS SIP hardware versions seem to have
very buggy firmware possibly due to hastely done porting from H.323
firmware.
Is there anyone on this mailing list who was able to:
1. setup a 35xxA FXS with all ports authenticating properly with *?
or
2. setup a 38xx FXO to work as dial-in from pstn to
2003 Sep 03
0
Problem with Asterisk -> Welltech Wellgate 3502
Hi there
I have some problems in setting up a connection between * and a Wellgate
1501 (1FXS). Either I can dial from * to my Wellgate or I can dial from the
Wellgate to *.
On the Wellgate you have to setup both "Line number" (which is the number it
answers) and "Line account" (which is the account it registers as). Should I
expect any problems if these are set the same?
2006 Feb 07
2
Welltech USA? and Wellgate Products?
Any feedback on this brand and in particular on doing business with
WelltechUSA?
I am looking to the Wellgate 3701A which is a 1FXS-1FXO arrangement. I
am hoping to replace the near worthless Grandstream HT-488.
This company is telling me that I need to wire $ directly into there
bank account. Most unusual.
Thanks for any feedback on this,
Marty
2004 Sep 24
3
ISDN (point to point) questions
Hello;
we are looking to replace our current PBX with a *-box; it is
connected to ONE ppp isdn connection that is terminated by the NC. We
got on this box 4 msn's configured.
currently we are working with pstn fxo's behind the PBX; it works but
we can't use the CSID information behind it. We want to migrate and
keep the MSN's to decide routing in combination with the CID.
2003 Apr 25
9
Dialplan question
First, here's what I want to do / what I have:
X100P and a Quicknet PhoneJack.
I want to be able to pick up the analog phone (connected to the phonejack)
and dial another computer (with the same hardware) or just make a regular
phone call which will be decided by asterisk depending on the phone number
dialed. I know that this won't be taking full advantage of asterisk, but
I'm
2008 Nov 27
2
Wellgate & Asterisk
I got a Wellgate 3804A and need some hints:
Both have public IP *.131=asterisk (1.6.0.1) *.133= Wellgate
Wellgate 3804A settings (Line1~Line4):
1. Sip Config
Mode: Proxy
Primary Proxy IP Address: *.131
Primary Proxy port: 5060
Line1 Number: 1002
2. Security Config
Line1 Account: 1002
Line1 Password: ******
3. Line Configuration
Line1: Type=FXO, Hunting Group=2, Hot Line =
2006 Feb 26
3
Newbie config help? Wellgate 3701a
Hi again,
Kind of sheepish about asking for help, as I have only spent a day
banging my head off this...
I got my new Welltech 3701a, 1FXS,1FXO gateway.
I flashed it with what is seemingly the appropriate firmware (SIP
V1.04). This seems to have gone ok, and it is now registering both
ports ok with asterisk. For 1 minute I thought I was home free and and
everything was just going to work
2006 Mar 23
1
wellgate 38XX FX & FXS voip gateways with outgoing call files
I am interested in the wellgate 38XX FXO and FXS gateways (and other
similiar units).
My question is can outgoing call files use these devices???
Can I fashion an outgoing call file with a channel like:
SIP/WellGate-1/5551212 (for the first port)
or SIP/WellGate-2/5551223 (for the second port)
TO these devices behave this way?
Of course incoming calls I dont see as a problem.
It's asking
2005 Jan 18
1
Wellgate 3804 Firmware
Where I can find the firmware for the Wellgate 3804 ?
The files are:
- 2m4sipfxo.103
- 4fxosip.103
I don't have a password to pick up it at the welltech site.
Kind regards,
Miguel
2004 Aug 21
0
welltech fxo and *
hello everybody ,
i got a test setup with
lanphone 101 connected to *
and a welltech fxo 3802 also to *
the extensions are configure so that i can dial from the lanphone to
the fxo.
although once on the FXO and having the dialtone, no of my dtmf
dialing is being processed on the FXO. It keeps giving me the
dialtone constatly.
Everything is configured as outband DTMF (we
2004 Aug 18
27
SpanDSP
Anyone knows where can I find spandsp? Official site seems permanently
down...
TIA,
Simone.
2007 Jan 26
1
WellTech 380x Gateway
Ok this is a simple question...
What has been your experience with the WellTech 38xx series (I'm looking
specifically at the 3802)
VoIP gateway? I'm looking for a good (and hopefully not too expensive)
VoIP/T.38 gateway for my office.
Asterisk intergration is not a major factor at this time but may be
later on. How well does it work? Is Echo
a problem? Do the T.38 capablities
2006 Apr 21
1
wellgate FXO unit
Anyone know how to set the wellgate unit so incoming calls
pass on directly to asterisk?
Right now incoming calls ring twice and I hear a recording saying enter
the extension. If I go enter the extension it goes on to asterisk just fine.
I just want the incoming call to go directly onto asterisk.
Anyone found that out?
Jerry
2006 Apr 07
1
wellgate registration 3802
I have a new wellgate 3802 unit. I have not gotten it to
register with asterisk 1.2.6.
My proxy setting is the correct IP in the 3802.
My security config is 1001/1001 and 1002/1002 on the wellgate (simple at
this time).
My sip.conf has:
[wellgate3802L1]
type=friend
dtmfmode=inband
username=1001
secret=1001
host=dynamic
canreinvite=yes
nat=no
context=wellgate
[wellgate3802L2]
type=friend
2004 Jul 01
1
Help with Welltech 2FXO gateway, GS BT100 and Asterisk
Hi All,
I'm trying to configure 2 GS BT100 connected to asterisk and Welltech 2
ports FXO gateway. I configure WellTech 2ports FXO and GS BT100, both GS
BT100 can call each other without any problem but when I tried to call a
local extensions connected to my Welltech FXO gateway, I couldn't hear any
voice on both ends.
I would like to ask if anyone has ever encountered this kind of
2003 Jul 28
0
Welltech FXS SIP registering with Asterisk
I have a number of Welltech FXS devices (running the SIP code) that I'm
trying to register with Asterisk. Has anyone had any success doing this?
If I have the Welltech set in peer-to-peer mode, I can call to and from the
Welltech, to Asterisk, just fine. However, because it's in peer-to-peer
mode, I can only call phone numbers that are in the static phone directory.
The phone
2005 Feb 24
2
Asterisk and Welltech USB SIP phone K1000A
Hi all
I'm fairly new to Asterisk, so be nice :-)
I was wondering if anyone has been able to get the Welltech K1000A USB
phone working on Linux. I see audio and HID drivers loaded when it is
plugged in to my Fedora Core 1 laptop, but that's about all that
happens. I've searched all the usual places (FAQ, Google, etc) but not
found anything helpful.
Asterisk is working fine with
2010 Feb 11
0
wellgate 3804A with frying
Dear Colleagues,
I installed a Wellgate 3804A and overnight lines on all this with frying, putting other lines Wellgate 3804A is well, so I guess it's a problem the first team which is already out of warranty, anyone know how can I fix this? or where to send it in or capital Buenos Aires to fix it?
Thanks
Mart
_________________________________________________________________
Todo