similar to: X100p on VIA EPIA-V problems

Hello, I am having problems, getting my asterisk-domU to work properly. It consists of the following components: - Debian Etch under Xen-3.1 with a 2.6.18-kernel - Asterisk 1.2.24 - mISDN-1.1.5 I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in permissive mode. This is working fine. The strange problem is, that the two HFC-ISDN-cards are not beeing initialized by the

I''m trying to pass my SATA controller through to a domain and have run into a weird situation. I have two machines with the same general class of hardware (Intel PIIX) and the pass-through works on one machine but not the other. On the non-working system, the SATA controller makes port reads, but they don''t return the correct values. For example, when running it in dom0, when

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

Hi! I tried to pcipassthrough usb-controllers to domu to use it with a memory-stick. First xen complained that the driver needs write-access to its configuration space, so I added these to pci-quirks. Since it still didn''t work I also added the device to pci-permissive but I still get an errormessage with Oops (at the end of this email) when sticking in the memory-stick. I tried

Hi! I tried to pcipassthrough usb-controllers to domu to use it with a memory-stick. First xen complained that the driver needs write-access to its configuration space, so I added these to pci-quirks. Since it still didn''t work I also added the device to pci-permissive but I still get an errormessage with Oops (at the end of this email) when sticking in the memory-stick. I tried

Yijing, cat /sys/bus/pci/devices/0000\:00\:0e.0/msi_bus returns 1, suggesting that it supports MSI. However, this "00:0e.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)" is a component of the addin card. Wouldn't the lack of support for MSI by the chipset "00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 01)"

I mistakenly only replied to Yijing Wang the first time. Here are the further details. uname -a: Linux p5-133 3.15.2-p5-133 #1 Thu Jun 26 22:56:27 EDT 2014 i586 GNU/Linux Here is the output from lspci -vvvxxx: root at p5-133:~# cat lspci.txt 00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Hi, I using asterisk 1.2.4 on a CentOS with Linux 2.6.9-22.0.2.ELsmp kernel. I've two x100p cards connected, only one card is reconigzed by asterisk. 02:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface 02:02.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31) 02:03.0 Communication controller: Tiger Jet

On Thu, Jul 3, 2014 at 10:35 PM, Yijing Wang <wangyijing at huawei.com> wrote: > Hi Brian, > From your 01:00.0 VGA compatible controller PCI config register, it supports 1 MSI vector, so I think this > card has no problem. But you didn't answer what's the pci_enable_msi() return during it enable MSI fail. > > You can check PCI bus whether support MSI like: > >

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

Hello, I have a PC Chips A31G board with AGPro slot and found that nouveau does not work properly with it. Console works but reverts to software mode, X11 hangs with mouse cursor only. The slot is physically AGP 1.5V but is wired to PCI bus as the chipset (SiS 761) does not support AGP cards. To further complicate things, the chipset has AGP capability - but only for the integrated video. You can

Hello list, After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently detected as 2 ports instead of 4. I still load the driver as "modprobe qozap ports=12" as I've always done. But now it only sees 2 ports. Output of "lspci -vvv" ------ cut -------- 02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) Subsystem:

Hello, guys. First apologize my flaws, I am not a native English speaker and thus am prone to stupid errors. My box is an ASUSTek Notebook with Optimus capability (no, this is NOT about Optimus, I don't try to use Optimus yet, so please don't switch off here) with a running Gentoo. The first GPU is an Haswell-based Intel chip, the second one is a nVidia GeForce GTX 850M, the chip is a

Hello, i''m using the latest Xen 4.0 testing from the mercurial repository and i want to passthrough my Intel Core gpu. But somehow it has a weird IRQ of 1251. So i cant start the vm if i set pci=[''00:02.0'']. The device is bound to the pciback driver correctly. The interesting part of xm dmesg (appears when i start the vm): (XEN) [VT-D]iommu.c:1484: d0:PCI: unmap bdf =

Hello, i''m using the latest Xen 4.0 testing from the mercurial repository and i want to passthrough my Intel Core gpu. But somehow it has a weird IRQ of 1251. So i cant start the vm if i set pci=[''00:02.0'']. The device is bound to the pciback driver correctly. The interesting part of xm dmesg (appears when i start the vm): (XEN) [VT-D]iommu.c:1484: d0:PCI: unmap bdf =

I came into an Abit AX8 motherboard and single core AMD Athlon 64 FX. I did a quick install of CentOS 5.0 on it to make sure everything worked and then returned the hard disk and case to the original owner. After getting a new case and hard disk, I downloaded the CentOS 5.1 cd images and installed. For some reason the motherboard's on board sound no longer works (worked with CentOS

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, I have a *very* strange problem, unfortunately it's kind of a show stopper regarding the deployment of the machine. :( I have two Intel Gigabit Ethernet NICs on board (Supermicro-based Server), quoting lspci (full output see at the end of the email): 0d:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller

Hi all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac

Hi List, I have an ASUS G73S laptop with our favorite OS installed and all up-to-date. Sound has always "just worked" When I use the Preferences>Sound app I can setup the hardware, input, output and was overall very impressed. One can check each speaker and the laptop has a front left and right and also has a bass speaker which seems to be connected to the left rear. The various

Hi, I'm new to asterisk, in order to enable X-lite to make a call, what should i do before making a call? Current stage, 1. i have create a few accounts in sip.conf. 2. Registration are successful. Pls advice me how to continue then... Thanks _________________________________________________________________ Personalize your Live.com homepage with the news, weather, and photos you