similar to: cisco 7960 CTLSEP

Hi, Does anyone know how to make this thing (7940) work with asterisk (chan_sccp module) ? I've set the configuration according to the wiki and now the phone just keep asking for CTLSEP<xxx>.tlv from my tftp server. In the cisco's web interface, I found this in the device logs : 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 ...

Hi list, I have bought some Cisco 7941G-GE IP phones and want to use them with asterisk. Before bying I tested the whole setup with three different models of the old 79X0 series (a 7912, 7940 and a 7960). Flashing the formerly provided SCCP-Image to SIP was no problem, but now it complains about a nonexistent CTLSEP<mac>.tlv file. Most of the howtos say something about an empty file but

hi, I'm trying to configure a Cisco IP Phone 7911G in order to work with Asterisk. I have loaded the 8.3.3 SIP Firmware of Cisco through a DHCP and a TFTP server. All seems ok but a file that is downloaded : term06.default.loads (I understand that is for 7906 model) instead of term11.default.loads (I understand that is for 7911 model). In any case the phone reboots well. At this moment I

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

Hi, ? We are new to IP phone firmware upgradation (Sorry if it is a re-post of previous question(s)). ? Recently we have bought a cisco 7942G IP phone. It currently has SIP 42.9-0-2SR1S firmware loaded on it. We do not see any option to configure a SIP Proxy where we can provide SIP Server (Asterisk PC/Device)? IP address (with current firmware on it) to register it with Asterisk. ? Do we need to

I have a Cisco 7940G IP Phone. I am trying to load the firmware to SIP 3.2. The Phone just hangs in Defaulting CM to TFTP Server. It doesn't do anything else after that. I also have two other 7940g's that are the Universal Application Loader mode and say Protocol Application Invalid. I need to know what I can do to fix both these problems. I am running Asterisk@Home version 1.0. I have to

I just wanted to post this so that it was out there and Googleable. Hopefully it will save other people a bit of time. If you have a Cisco phone (I was testing with a 7970, though presumably it would affect 7960 and others as well) that is looping trying to fetch the CTL tlv file - it may be because you are using Debians 'tftpd' (should be netkit-tftpd...*cough*hey, Debian

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

I have just got a Cisco 7941G and am experiencing the exact same problem (phone is requesting .tlv file from TFTP server and never asks for .cnf.xml file). The phone originally had SCCP on it, but I downloaded and flashed with the latest Cisco SIP image (8.4(3) released 2009-01-13). In reading your message below, it looks like you were going to try an incremental upgrade?did you have any

I have a done google seaches on convertion and so far they all failed. Rich adamson and wheely-bin.co.uk Here is what I have Laptop running solarwinds tftp with the following files OS79XX.txt <- POS30201 SIP<phonemac>.cnf.xml RINGLIST.DAT <-Ringer1.pcm Ringer1.pcm The phone (7940) is hardcoded to the TFTP ip of the laptop and has a hardcoded ip is was on firmware version:

Does anyone know if version 3.1 is Call Manager or SIP? Thanks.

John; I'm trying to flash 7.1. What I followwd was the wiki page you refer to. My real question is do I need the .load file tftp debug shows the 7960G is asking for? Voipsupply didn't supply it. I'm trying to verify that's what I need befor I start hounding them. -JB Hawaii John Bittner wrote: >John, > >You have to go to 7.1 before 7.3 >Also look at this.

This for the archives in case it may help someone: I was able to upgrade two Cisco 7940's from firmware P0030301MFG2 to SIP 7.1 as follows: 1. Installed 7.1 images from the Cisco zip file to the TFTP server. 2. Specified "image_version: P0S3-07-1-00" in SIP<MAC>.cnf and SIPDefault.cnf 3. For the older of the two phones, renamed P003-07-1-00.bin to P0S3-07-.bin, making it

Hi, this set of patches contains the initial implementation of the IEEE 802.1Qbg standard: code for the exchange of EVB TLVs in LLDP frames to negotiate VSI capabalities as well as VDP VSI TLVs between a host with virtual machines and an adjacent switch. It supports setting the parameters of the TLV exchange from the command line using lldptool. VDP profiles consisting of

Hi, this set of patches contains the initial implementation of the IEEE 802.1Qbg standard: code for the exchange of EVB TLVs in LLDP frames to negotiate VSI capabalities as well as VDP VSI TLVs between a host with virtual machines and an adjacent switch. It supports setting the parameters of the TLV exchange from the command line using lldptool. VDP profiles consisting of

Hi, This series of patches contains the second part of an initial implementation of the IEEE 802.1Qbg standard: code for the exchange of VDP VSI TLVs between a host with virtual machines and an adjacent switch. VDP profiles consisting of mode,mgrid,typeid,typeidversion,instanceid,mac,vlan can be given to lldpad with lldptool. A way to deliver profiles to lldpad from libvirt using netlink

Hi, This series of patches contains the second part of an initial implementation of the IEEE 802.1Qbg standard: code for the exchange of VDP VSI TLVs between a host with virtual machines and an adjacent switch. VDP profiles consisting of mode,mgrid,typeid,typeidversion,instanceid,mac,vlan can be given to lldpad with lldptool. A way to deliver profiles to lldpad from libvirt using netlink

Hi, This set of patches contains the initial implementation of the IEEE 802.1Qbg standard: code for the exchange of EVB TLVs in LLDP frames to negotiate VSI capabalities as well as VDP VSI TLVs between a host with virtual machines and an adjacent switch. It supports setting the parameters of the TLV exchange from the command line using lldptool. VDP profiles consisting of

Hi, This set of patches contains the initial implementation of the IEEE 802.1Qbg standard: code for the exchange of EVB TLVs in LLDP frames to negotiate VSI capabalities as well as VDP VSI TLVs between a host with virtual machines and an adjacent switch. It supports setting the parameters of the TLV exchange from the command line using lldptool. VDP profiles consisting of

Hi, this set of patches contains the initial implementation of the IEEE 802.1Qbg standard: code for the exchange of EVB TLVs in LLDP frames to negotiate VSI capabalities as well as VDP VSI TLVs between a host with virtual machines and an adjacent switch. It supports setting the parameters of the TLV exchange from the command line using lldptool. VDP profiles consisting of