similar to: Detecting DTMF tones

Hello, I have just managed to get my 1st * server up and running and have a lot of issues with theX100P analog card. Would really appreciate anyone trying to help me on the following : 1. The receive and transmit is too soft. So i increased the txgain and rxgain. The volume is fine after this, but there is a lot of 'wind' noise on the line. I have my echo cancellation on, aggregive

Im trying to configure voicemail, but asterisk doesnt respond to dtmf codes. I uses kphone with g711u codec (I've tryed the others one) and in sip.conf I configure dtmfmode=rfc2833 (I've tryied inband and info). Asterisk seems not to "see" the tones. Could somebody help me? Thanks

I am wondering if anyone could help me figure out how to turn down the volume on all the dial tones, indications, etc.. and especially the call-waiting CHIRP! I don't want to change the txgain and rxgain because they are working at levels that I would like. However, when voice conversations and voicemail recordings are at good levels then the dial tones, busy tones, etc are way too loud.

Hi, I have a Digium TE410p T1 card and I've noticed that under asterisk 1.4.17/18 I have problems detecting DTMF in IVRs. I think I've narrowed the problem down to some sort of interference between the greeting that is playing and the DTMF tones. DTMF detection seems to work very reliably when I am in Read() or WaitExten(), but is absolutely unusable while in Background(). I hope someone

Hello everyone, I am new to Linux, some help with the following would really be appreciated : 1.How can I load asterisk automatically in Linux each time the machine boots up (like autoexec.bat in windows) 2.how I can shut down and restart asterisk automatically every night? Thanks San -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone know what this means? It is in DMESG, and we have people complaining about echo. Disabled echo canceller because of tone (rx) John

Good day list, I am feeling extra stupid this Monday morning and am hoping someone can come to the rescue. I am trying to use the ztmonitor utility on my wildfire 4 FXO card. and have read the following from the wiki. *********Wiki start******** If you set this to yes, use ztmonitor to adjust the rxgain and txgain. Ztmonitor isn't installed by default; but it is included with the Zaptel

Still grasping at straws trying to solve DTMF detection issues with one of my asterisk servers. This particular server is now running Asterisk 1.4.18.1 and Zaptel 1.4.9.2 in runlevel 3 (console only) with 2 X100P cards. I have tried adjusting channel gains, turning call progress and relaxdtmf on and off, switching echo cancelers, just about everything that Google turns up and I can't

Hi, folks. I have a problem using Asterisk 1.2. I create conferences using app_meetme and Zap channels, and for every participant I run the script defined by AGI_BACKGROUND_SCRIPT to be able to listen and react to DTMF tones. As the docs tell me, when using the AGI background script one loses the ability to control the meetme conference via the command line so for muting conference participants I

Hi I have a server with the last version of asterisk branches, zaptel branches, 2 Digium Card with TDM800P 16 HPEC channels (Echo Cancelation), 40 Grandstream BT200 and 10 Grandstream GXP2000. zapata.conf echocancel=64 rxgain=0 txgain=0 when i place a call o receive a call, I finish a sentence i hear a ssssssss, AND when the both side talks at the same time i have choppy audio. Any

Hello, I have an Adit 600 (3 FXS cards) hooked up to a digium T1 card in my asterisk box. I 'connected' the slots to the a:1 T1 interfaces via the command line. The slots (3 fxs) are configured with 'ls' signaling. I configured the T1 card with the same line settings as the T1 interfaces on the adit and I get green lights on both the T1 card and the T1 interface on the adit (so

Hi List, I am using Asterisk 1.6.2.18. One strange problem come into my knowledge after using this version of asterisk. Without pressing any digits or key from my mobile, I am getting DTMF into my asterisk server. For getting DTMF I have use one opensourse application which gets events from asterisk server and store into database. And after that I made my own script to gets these DTMF keys and

Do bristuffed zaptel (zaphfc) supporting rxgain/txgain in zapata.conf? I'm changing rxgain in zapata.conf, and reloading zaptel, but sound level on ISDN(HFC) is always the same (loud).

I have a Toshiba DK424 connected via T1 E&M to a TE110P card. Intermittently when a user dials a number I am getting 'getdtmf' errors on the Ast server and the calls do not go through. If they dial the number once or twice more, it works fine and I receive no DTMF problems. On another note, end users are complaining about intermittent disconnects. T1 is ESF/B8ZS - 24 chan. Other

Hello All,I am Nirmal Singhania from NIIT University,India. I am interested in Clustering of search results Topic. I have been in field of practical machine learning and information retrieval from quite some time. I took various courses/MOOC on Information retrieval and Text Mining and have been working on real life datasets(KDD99,AWID,Movielens). Because the problems you face in real life ML/IR

Hello, all. I've come across a nasty problem just as we are ready to put our first system into production. During our final testing, we were plagued with several "invalid extension" or "password incorrect" messages when we knew the information entered was correct. Upon investigation, we saw that DTMF signals were occasionally but not consistently duplicated. We might

Hello, In my quest to figure out the source of the random echo on our shiny new asterisk install, I have been using ztmonitor on the TDM400p channels for the good part of today. I have 2 TDM400p cards with 8 FXO modules and 6 pots lines connected to them (last 2 channels are unused but configured in zaptel). Even when the lines are onhook, the Tx values settle down to 0 but the Rx values still

Is there a reasonably easy way to increase the volume on a DAHDI channel? The VOIP phones in the house work OK, but for the phones connected to DAHDI channels on a Digium TDM400P card, the volume is very low and it's hard to hear if there is any background noise at all. If this is documented, point me to where and I'll gladly do my reading. Thanks, --Greg

Hello! I'm having an echo problem with a TDM card. The TDM card is being fed by a channel bank just 12 or so feet away. When you put an analog handset on the line, both the RX and TX volume seem to be just fine. However, when I use the TDM card, I have to have an rxgain of 13.5, and even then, the audio is relatively quiet. I'm also getting echo on these lines, so I have turned

Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some