asterisk users - Apr 2008 - choopy audio when both side talk at the same time

Hi

I have a server with the last version of asterisk branches, zaptel 
branches, 2 Digium Card with TDM800P
16 HPEC channels (Echo Cancelation), 40 Grandstream BT200 and 10 
Grandstream GXP2000.     

zapata.conf
echocancel=64
rxgain=0
txgain=0

when i place a call o receive a call, I finish a sentence i hear a 
ssssssss,    AND  when the both side talks at
the same time i have choppy audio.

Any help i appreciate.

Thanks Ruben

You might want to begin with tuning your rxgain and txgain settings... there are
a few methods for doing this on the internet, unfortunatly nobody can give you
exactly values to use for tx/rxgain as they will be not only specific to your
install, but specific to every single analog line you have... you can probably
get away with setting it once for all of your lines, but i'd recomend
setting it for every one.

http://lists.digium.com/pipermail/asterisk-users/2004-November/064312.html

That is the best guide i;ve seen to doing it, but there may be better ones.

After you get rxgain and txgain tuned for every one of your lines, you'll
probably notice a dramatic decrease in echo right away, but you can also tune
your echocancel= and echotraining= after that.

You can set these values on a per-channel basis by doing it like:

rxgain=6.3
txgain=-1.0
channel => 9

rxgain=7.595
txgain=-2.0
channel => 10

rxgain=6.3
txgain=-1.136
channel => 11

etc.

First step IMHO is getting your rx/txgain set properly... don't
underestimate how important those values are... I learned that the hard way.

--
Matt
________________________________________
From: asterisk-users-bounces at lists.digium.com [asterisk-users-bounces at
lists.digium.com] On Behalf Of Ruben Zamora [ruben.zamora at zys.com.mx]
Sent: Friday, April 25, 2008 7:40 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] choopy audio when both side talk at the same time

Hi

I have a server with the last version of asterisk branches, zaptel
branches, 2 Digium Card with TDM800P
16 HPEC channels (Echo Cancelation), 40 Grandstream BT200 and 10
Grandstream GXP2000.

zapata.conf
echocancel=64
rxgain=0
txgain=0

when i place a call o receive a call, I finish a sentence i hear a
ssssssss,    AND  when the both side talks at
the same time i have choppy audio.

Any help i appreciate.

Thanks Ruben

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users