similar to: BIG ISSUE with SIP, not sure where to go but it's killing asterisk.

http://voip-info.org/tiki-index.php?page=Asterisk+bounty+SIP+simultaneous+registry From the WIKI: Contributions Manager: Daniel Jimenez (cuban) Bounty: $50 USD Date opened: July 10, 2004 Contributors: cuban ($50) Detail Yes, Yes I know you could do all sorts of fun with the dialplan to produce a similar effect, but I still would like to be able to do this. Plus it's easy money :). I

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco

Hi all. I've ordered a TDM400P with 4 FXO, but after using my X100P I'm thinking about returning the TDM400P because of bad echo issues. If I do get the echo issues I'll look at digital options. My question: Is anyone using ISDN (BRI) in the states? I've heard ISDN4LINUX devices suffer bad echo but chan_capi works great. All the chan_capi cards I find though are for overseas

Anyway to make hitting `0` during a voice mail dial an extension? The bosses used to have that feature and love it. Their VM prompt would say: "Hello, My name is blah blah. I am currently unavailable. If you would like to speak to an operator press 0 now, otherwise leave me a message". Extension 0 exists, but dialing it during a VM prompt does nothing. Thanks, -- Daniel Jimenez

I have searched all over the web and have not really found anything related to this error.... The only thing I found is related to a system stops responding on DTMF, which does not happen here... THe following is the output from the CLI: *CLI> 2004-08-09 17:36:29 DEBUG[229390]: chan_sip.c:2332 sip_alloc: Allocating new SIP call for 640E2D47-E98B11D8-8FDBE54A-5FB5A0CB@65.67.76.30

I receive this error on the asterisk console and it is pretty much ALWAYS coming up. Sometimes there will be a break where it does not display. We had our PRI provider test the lines and they claim that there is no signalling problem. It doesn't matter if there are no calls or if there are 10 calls in progress the error is still displayed. I also get an annoying popping or clicking sound

Hi, I am getting this message on the * console on my first pri span. Pri show span show it is down, and I can't make any calls from the span. Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27

HI all, Recently, I got the following message from CLI and finally the asterisk will hang. Anyone can tell me how to fix the problem or why it will happen. Thanks. Jun 17 14:18:02 DEBUG[24573] channel.c: Avoiding initial deadlock for 'SIP/1127-008d65f0' Jun 17 14:22:45 ERROR[24696]: chan_sip.c:11337 sipsock_read: We could NOT get the channel lock for SIP/1589-0087cdd0! Jun 17

Hi all, as good? I am trying to go up a board TE110P with link E1 ISDN PRI to establish connection with a central office Siemens HiPath 4000. But I am having the following errors: Server1:~ # asterisk -r Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'

I'm running an E400P. Every now and then Asterisk stops receiving incoming calls. This turns up in the messages log: Nov 25 10:49:12 WARNING[65541]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on span 1. Hanging up owner. Nov 25 10:49:15 WARNING[81926]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on

Could anyone who has successfully configured Asterisk to use g729 to conference 10-20 people please post their configs. I purchased and successfully installed 2 g729 licenses and but when I dial into my conference number on the Asterisk box from a SPA-2000 set to allow all codecs, it always appears to connect using ULAW. My iax.conf file includes the following under the general section

hello all, i'm using TE110P and all configuration prosess is done. but after i do the 'modprobe' for zaptel and wcte11xp, follow by ztcfg -vv and asterisk -vvvgc i have this error. *CLI> May 27 14:44:33 WARNING[3059]: chan_zap.c:8534 pri_dchannel: PRI Error: We think we're the network, but they think they're the network, too. May 27 14:44:34 WARNING[3059]: chan_zap.c:8534

I'm trying to see if this is even possible. When you dial ext 2000 I want it to ring my sip phone for 20 sec then call my cell and let it ring for 10 sec if I do not pick up the call on my cell I would like it to go back to * and leave a voice message for me. Here is what I have so far in my extensions.conf Everything works except the call will not go back to * after the 10 sec rule has

Greetings I am receiving following error message. Any idea as to why? WARNING[147466]: File chan_sip.c, Line 4530 (sipsock_read): Recv error: Resource temporarily unavailable WARNING[147466]: File chan_sip.c, Line 4530 (sipsock_read): Recv error: Resource temporarily unavailable Frank...

Hi, For a significant time now (since about 0.2.0-rc8n) the qozap driver has become very verbose if an ISDN line is not connected... I get the messages below every couple of seconds in the asterisk logs. The "flaw" in the messages is the "Alarm cleared" message - The alarm cannot possibly be cleared because there is no physical media connected into that port!!! (BTW - All

Hi all, I need the zap channels going, but got the following error. What do I need to change in my configuration? Thnx. chan_zap.c: In function `zap_send_keypad_facility_exec': chan_zap.c:2309: warning: implicit declaration of function `pri_keypad_facility' chan_zap.c: In function `pri_dchannel': chan_zap.c:9292: structure has no member named `call' make[1]: *** [chan_zap.o]

Hi!, this issue makes me crazy. I read a lot of docs, also * mailling list and I try a lot of things without success. Any help will be appreciated. Here is the info: Hardware: -------------------------------------------- Supermicro Server with motherboard X7DB8, chipset Intel 5000P, Xeon 5050 Digium TE110P Software --------------------------------------------- Asterisk version 1.2.12.1

<P>hi Everyone,</P> <P>We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,</P> <P>*CLI> <BR>&nbsp; == D-Channel on span 1 up<BR>&nbsp;&nbsp;&nbsp; -- B-channel 1 successfully restarted on span 1<BR>&nbsp;&nbsp;&nbsp; --

Hello, I have following problem with Sangoma A104 card: CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI

I have spent some time this morning trying to add an Astribank to our current Asterisk, but it failed, so I just removed the hardware, restore the config files to the original setup and started asterisk.; I could see that no Zap channels are started so I did load chan_zap.so: pbx*CLI> module load chan_zap.so [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application: Already have an