similar to: zap barge restrictions

Hi All Can anybody help me for dial plan to barge or Spy(ExtenSpy) specificor selective extemsions among 20 extension in my office. lets say my office extension range is 301-320 & i want to barge only 3 extension say 320, 302,314. is this possible to barge specific extension? . Plz help me for this.I am using Asterisk 1.4.9 & SIP channels. Regards Amit -------------- next

Sorry that got accidentally sent incompleted, here's the full post: OK, here is the long drawn out description of how I am using Zap Barge and Monitor: Zapbarge(listen in on live calls): Very simple actually I just added this to my dial plan(extensions.conf): ; barge monitoring extension exten => 8159,1,ZapBarge exten => 8159,2,Hangup Then when you dial 8159 on

Hello, You can use ZapBarge as an extension in your dialplan to listen in on conversations going on in Zap channels(Zaptel device channels) As for recording you can use the Manager interface command StartMonitor to start recording of a Zap channel and StopMonitor to stop it. Zap channels are pretty much the only ones right now that you can directly monitor and record through Asterisk. If

I'm setting up a new AAH 1.0 box to replace my AAH 0.6 box. Though on the new box, I've installed a generic ebay X100P. I don't have my livevoip or voicepulse accounts set up yet on the new box (can both boxes be registered at the same time?). I've set up one IP phone (SPA841) with the new box. I have my SBC POTS line plugged into the fxo card. I set up everything in AMP.

HI folks, I have set a barging facility with our production box.Client able to barge a agent but client raise a requirement, they want talk to barge agent but that communication is not listen by customer. It is possible with asterisk or not. thanks in advance. Regards Akhilesh -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi I have looked through the wiki and search the mailing list, but I cannot find a way to intrude on a call, can asterisk do this feature? if so how? Thanks for your help Robb

Anyone successfully implemented a solution for allowing ZapBarge call monitoring only for a specific group of agents calls? The issue I see is that the feature only works on zap channels, and all of the agents (in many cases) are IP phones. Allowing ZapBarge and ZapScan on the TDM PSTN (t100p) interface has privacy issues for senior managers, but would allow all outbound zap calls to be

I've seen a few but can't get them to work. I need one where I can drop a call into a conference without them knowing it to us it as a live monitor and barge function, anyone doing this are know of a gui client for windows I can use? Thanks,

I'm running Asterisk 1.6 and was wondering if anybody have a workig "barge in" solution running. I was thinking of using chanspy, but i would like that the original call would be dropped, and the new call would be the only one there. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, 1. When an agent is active on a call, i need the ablity for a third person to join the conversation. Basically barge in by a supervisor, participate in the conversation and then leave. 2. As an extension to the above, while on call, can the agent request a conference from another agent and later hang him up. 3. Is there any way for a call to be put in the queue destined for a specific agent

Hi there, I am using Asterisk 11.9 (with Sangoma-E1-Card/DAHDI) and it works fine :-) But I am wondering if there is a solution/application which will enable me to implement voice recognition while playing a voice file (barge in). So that the caller hears a voice file and can interrupt it with his voice. Currently (on our platform) the caller has to wait for the end of the voicefie. Then we play

Hi, I'm planning on migrating someone who uses a very mature system. They would be logging in either as AgentLogin() or AQM. The main requirement however, is: The supervisor will have a control panel, where he will see how many of his agents are on call. If they are, he can "right-click" on the agent and get the options Call Monitor (where the super just listens in on the call,

Hellow, i need the following requirements with asterisk : 1) Can ACD (Automatic Call Distribution) service work with asterisk, and how to set up ACD in asterisk ? 2) How call barging can set up in asterisk ? 3) How call recording can set up in asterisk? Thanks mahboob System Engr SSL -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've set up asterisk with my X100P as a home answering machine. Works great so far - answers the phone after 20 seconds, runs the phone tree, emails voicemail, etc. However, the one feature traditional answering machines have that I haven't been able to figure out is how to listen in on the call. Ideally I could just route through Console/dsp and hear it on my speakers. I've tried

I'm sure this a very common and easy thing to do with Asterisk, but for the life of me I can't find the application that will allow me to open a Zap channel. Real world example: To be able to connect to an open Zap channel, so it would allow me to say, join in on a call that was originally answered by a PSTN phone (ie. just like you would by simply picking up another PSTN phone..!).

Hi All Can anybody help me for dial plan which can barge inbound call groupwise. Because when i am trying to barge inbound calls which is coming on my DID number i can hear 1st 3 digit of my Inbound provider IP address instaed of extension which pick that calls. I tried Chanspy as well as Extenspy. But result is same. So Plz Help me. Thanks Amit -------------- next part --------------

I've got a couple of different situations where I'd like to do something like zapbarge into a specific channel but I'd like to be able to actually talk to the party or parties on the channels, not just listen like w/ zapbarge. There are two scenarios I can think of right now where it'd be very handy. a) when the outside line is ringing and Asterisk is waiting to answer or

Hello all, OS OpenSuSE 10.3 * ver 1.4.26.2 zaptel ver. 1.12 Digium TE122 I have a request for remote users to be able to dial through the system so that the sales managers can barge/chanspy on the sales force. I have the DISA part working with authentication(rather straight forward) but what I can not figure out is how to enable the supervisors to be able to barge on these calls. Is there a

Ok here is one for you. I know we all do the this for 911: exten => _911,1,Dial(Zap/1/911) exten => _9911,1,Dial(Zap/1/911) And this probably is more then acceptable for most of us. However I have a system setup that uses SIP for most calls and 1 POTS line. We use a "least cost" routing that uses the POTS line for local calls AND SIP when appropiate. What I want to do is

I'm using a TE405p with all four spans enabled, two configured as pri_cpe and two as pri_net, the asterisk is sitting between our ISDN (UK BT EuroISDN30) and our phone system. We have 200 DDI numbers on the ISDN's and I need to give one of our clients dial-in access to be able to monitor calls we handle on their behalf. I've got ZapBarge working but I need to restrict the client