similar to: Asterisk to Vonage

to start with i am new to asterisks and i am also a telcom idiot. with that said i have one vonage line i would like to hook up in my soon to be built Asterisk ippbx server. Now with the one Vonage (with call waiting) line can i receive more one call using an auto attendant route the call the approiate extention? thanks mike

I'm running Asterisk 1.0 RC2 on a RedHat 9.0 box. I have a ISDN BRI line that I would like hook up to my Asterisk server and would like to ask the group what you guys would recommend as far as isdn cards that install easily into the Linux and asterisk environment. Rgs, Mark

Hi All, I've got an * PBX up with couple of stations and now I'd like to integrate my Vonage service for outgoing PSTN calls. Is this possible if I have an account with them that uses their hardware box (ATA186) or do I need a 'softphone' account? thanks...

atlast after working of 7 hours i got voange soft account working on asterisk.

My boss is insisting we support fax, and I keep telling him that Fax over IP is very unreliable and not recommended and his immediate come-back is "Vonage does it." and it's very hard to figure out how. I don't think Vonage does T.38, the Linksys/Sipura units they're using doesn't support T.38 to my knowledge. That means they have to be using G.711Ulaw to send faxes.

i have tried to connect my asterisk server to vonage like this: Sip.conf: register => 1<yournumber>:<secret>@atlas-east.vonage.net:5060 [vonage] type=friend username=1<yournumber> secret=<secret> host=atlas-east.vonage.net port=5060 allow=all maxexpirey=15 dtmfmode=inband fromuser=1<yournumber> fromdomain=atlas-east.vonage.net canreinvite=no nat=yes

I setup a vonage account last year, and cancelled it last night when I put my asterisk box together and signed up for a Broadvoice account to use with it. Now I would like to use my Linksys router as an MTA, but realize it is still programmed with all of vonage's proprietary information and I do not know how to clear it. I understand that just pushing the reset button will not do it.

Hi, I'm trying to get Asterisk to connect to Vonage (softphone acct) to allow me to place and receive calls. I have successfully configured Asterisk to route inbound calls and send them to the correct extension, but I can't get outbound calls to work. I have Asterisk successfully registering with Vonage, but when an INVITE is sent out, I get a "404 Not Found" back from Vonage

I just installed Asterisk on my server and I have Vonage softphone. I need my Asterisk server to receive calls through the Vonage Softphone DID and make outgoing calls through the Vonage ATA using an X100p to connect to it. Can someone help me out on configuring this? I really need this for my business and would greatly appreciate the help.

I know Vonage doesn't officially have a "bring your own device" type program, but they do offer a softphone. Has anyone gotten Asterisk to connect directly to Vonage? This would be a great help!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060329/5bc9f644/attachment.htm

I have an IVR application that works fine from multiple DID sources, unless the call to that DID was from a Vonage service user. In this case about half the DTMF tones never get recognized by Asterisk. Has anyone else seen this? Suggestions? I'm running 1.0.9.

Okay, my last post for the night. So, after tweaking my iptables rules I placed a test call from my * -> Vonage softphone account, to my Vonage main account (which uses the Motorola device). Once connected I tried punching a few DTMF's to check the quality and found I had been transferred to a fax machine. ???? Did I find a secret entrance to some fax machine at Vonage, or

Hi people, what is the current status of send/receive fax on asterisk extensions, i dont want to receive the fax and send an email or viceversa, i want to connect a standard fax machine to a Linksys' ATA (FXS RJ11 port) . Webdoc?, pointers? Thanks

Can someone provide example configuration files and/or instructions for configuring Asterisk to work with chan_sccp2 and a 7960. I have the searched the chan_sccp2 site, the voip_info wiki site, asterisk doc project, and mailing list archives for the past year for help, but failed to find anything helpful. Some of the questions I have are: 1. What settings need to be made on the phone? 2.

Listonians, Anyone get * to work together with Vonage? Thanks, Jerry

Does anyone have a working connection to Vonage via asterisk? (SIP, not ATA) I just signed up to test their service and they sent me a Number, Proxy, port and password. Every reference I have tried leaves me with a 404 error coming from Vonage. If you have a working setup, please post some config references. ? Thank You, Steven BerkHolz Soon to be known as HIROTEC AMERICA

Hello, Is there any possibility of integrating plans of vonage with asterisk. Regards Vijay Gandhi

Anyone actually got this working with asterisk ? I have read posts that it is possible with capi and the diva server cards. Regular diva and diva pro both claim to support NI-1 and NI-2 and CAPI - will they work as well ? Has anyone actually got it working ? Forget the should and could part, I only care about the does/doesn't and why. If you have it working, please tell me - telco,

I am having trouble with this. I can dial 1800 numbers fine as well as FWD service numbers but not Vonage. I can be called from ipkall and fwd and can call aixtel numbers. I use aix2 with Fwd. My extensions.conf for Vonage: ; vonage numbers ; ; +2431 exten => _2431XXXXXXXXXX,1,SetCallerID,${FWDCIDNAME} exten =>

-----BEGIN PGP SIGNED MESSAGE----- Greetings, I've just about got Asterisk up and running and am wondering the following. Currently, I subscribe to both Vonage and Broadvoice and as such, I've got a Sipura and Cisco ATA186. Although I'm sure this is expressly prohibited somewhere in my service agreements, can I reprogram these devices to access my own asterisk server rather than