similar to: Cisco 7960G, Skinny.conf, and reboots

Hi all: I've got some core dumps with chan_skinny. The client is ATA186 with v2.16.1.ms ata18x (Build 030814a). The * version is CVS-10/05/03-16:03:26. When I make a call, the phone connected with ATA rings only 1 time and * dies. Maybe I have some errores in ATA config. If someone has proven configs for ATA, please send me the details. Thanks in advance, Gus The logs: *CLI> Version

Ok, Skinny gurus. (btw, I'm super pleased to see development happen on this). Thoughts on this?? I added this context to my skinny.conf: [ppc] device=SEP00022D494F2A context=employees line => 50 ; Dial(Skinny/1@ppc) I've downloaded the 30 day Window eval of VTGO! (PPC) from www.ipblue.com and it hangs on Registering. *CLI> skinny debug Skinny Debugging Enabled

I have a Cisco 7970 that I am tying to get working. The phone powers up and registers but nothing else. I am using the development build. Any thoughts? The message I get when the phone powers on and registers. *CLI> skinny debug Skinny Debugging Enabled -- Starting Skinny session from 192.168.101.6 Recieved AlarmMessage Device SEP000F23FCA366 is attempting to register --

I have a bunch of 7910's that I managed to get registered with Asterisk 1.2.14: managed5*CLI> skinny show devices Name DeviceId IP TypeId R Model NL -------------------- ---------------- --------------- ------ - ------ -- test7 SEP0004C1878F8E 192.168.0.226 6 Y 7910 1 The problem is that the phone resets when I attempt to make a call from it or place a call to it. If I pick up I have

Hi, the last 2 days i was working on getting the 7920 Phones to work with Skinny & Asterisk; however no luck (yet). Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for me ? it should be documented at the cisco page, but it isn't :-( I still have the issue that the 7920 spits out "No Service - IP Config failed" but Asterisk is giving me sign that the

Hi, please tell me, is original skinny support in Asterisk stil under development or is better to try chan_sccp from http://chan-sccp.sourceforge.net ? my first try was unsuccessfull (chan_sccp compile OK, but module loading fail during Asterisk startup) and my phone (C7940) seems to be not supported in original chan_skinny :( PJ

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hello folks, I'm trying to install chan_sccp and get this error [chan_sccp.so]Oct 2 00:28:06 WARNING[-151090528]: loader.c:248 ast_load_resource: /usr/lib/asterisk/modules/chan_sccp.so: undefined symbol: __use_ast_pthread_create_instead__ Oct 2 00:28:06 WARNING[-151090528]: loader.c:429 load_modules: Loading module chan_sccp.so failed! After this, mpg123 goes crazy and shoots my

Is anyone using a 3com 3CNJPSE to power a 7960G? I have a couple of 7960Gs and 3CNJPSEs but no combination appears to work. Both phones work fine with a cisco power cube. I get a 47.6V reading across pins 5 and 8 on the patch cable coming from the 3CNJPSE. The network still works through the 3CNJPSE, just no power to the phone until I connect the power cube. Using two straight through wired

Is there more than one version of the Cisco 7960? I see some items advertised as 7960 or 7960G, but searching on 7960 only brings up 7960G info, or ambiguous stuff. joe a.

Hi everybody, I will receive my CISCO 7960G tomorrow. I've ordered it as a "global spare" without any callmanager licence. Now I don't know if I can get firmware-updates so could please someone send me the SIP-firmware? Is the default firmware the "skinny" one? Wich would be better to use with asterisk? Thank you very much

I was wondering if people have experienced issues with Cisco 7960G and Asterisk. Any feedback on people's experience deploying this phone in production environments would be appreciated. Thanks in advance

I'm trying to set-up Asterisk server and I would like to buy 2 SIP phones. Has anybody tried Cisco 7960G? Or 7940? What audio compressions can I use with this phone and Asterisk? Reason why I'm asking is because Cisco supports G.711 and G.729a audio compression (probobaly some tohers but they are not listed on data sheet) and on Asterisk features i found that it supports G.729 but need

hi! I've got cisco 7960G working with * box. Calls could be Blind Xfered through the phone but not the supervised transfer( Message on the phone: Transfer failed). Even when I put the caller on hold and resume it later, I can't hear the other side but the otherside can hear me. (It shows as the line is connected though. Yet the respective caller entry blinks.) Any suggestions most

Can anyone recommend a good voip provider? Thanks

Hello, I've recently received a Cisco 7960G phone with the factory default SCCP firmware on it. As we're using SIP on our network, the first things i've done was to upgrade but unfortunately the phone just restarted. By looking on the TFTP logs and tcpump output, i've seen that the phone crashed and restarted just after downloading the OS79XX.TXT file, without requesting the image

Hi, After reading this valuable forum and the voip-info wiki and follow all the steps , but my Cisco 12SP+ remains unregistered. These are my config files: skinny.conf [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 172.20.1.1 ; Address to bind to dateFormat = D-M-Y ; M,D,Y in any order (5 chars max) keepAlive = 120 languaje=es allow = all ; disallow

Hello, We are planning to replace our current PBX with an Asterisk / SIP solution, and are now trying to decide which phones to get. My first thought was the Cisco 7960G, but the Cisco licensing scheme irritates me enough that I'll probably end up going with either the Polycom IP-600 or Snom 360. If anyone has any opinions of these phones, especially in comparison to each other, I would

When we were first installing these SIP phones, the time and date was displayed on the top status line. Firmware version 6.3. Using dhcp, tftp, http, and ntp servers for configuration all on the LAN (* box). Now that we have these working with *, the time/date display is missing. Any ideas? Thanks, Tom

I saw a thread from 2003 that addressed this problem but they didn't post a fix: When I plug my PC into the 2nd ethernet jack on my Cisco 7960g it loses connection on and off for ~30 seconds at a time. I tried playing with setting the speed from auto to 100/full, half, etc. to no avail. Any help on this would be appreciated. -------------- next part -------------- An HTML attachment was