similar to: Testing a channel's status

I have all my SIP users in a realtime database. I would like to use MySQL command to query the database and use the results from the query to page all the phones found in the query. The results from the MySQL query will be multiple rows of extension: Something like: mysql> Select extension from sip where extension like '6%' 6001 6002 6003 ex.... I need to put all the results into a

Hello. I have two snom200 ip phones and 1 mp108fxs (audiocodes 8 fxs) and i dont get a ring in the caller phone when I dial from a snom200 to the other snom200 or the mp108fxs, I made a debug with ethereal, and I can see a "Ringing" packet being return from the called snom200 or mp108fxs to the asterisk box, but it is not being re-transmitted to the caller snom200. Altough

Hi all, -------- I have a Asterisk at a public Network (official IP address). In the local network I have isntalled a Snom 200 IP phone and in my home network (behind NAT) a Snom 100 device. I can dial the Snom200 device from my home location without any problems but the Snom200 can not dial me. It always gets a "we do not rely". I tried to forward the SIP Port (5060) UDP via UPnP

I am using the snom 200 with Phone type snom200-SIP Version snom200-SIP 2.04g Bootloader URL http://www.snom.com/download/snom200-boot1.9.bin Firmware URL http://www.snom.com/download/share/snom200-2.04o-SIP.bin I am using asterisk stable tree. I had to disable "Challenge Response on Phone" on my snom; I could not get it to work with

Check the Redirection on the web interface of your Snom 200. If it says "When Busy" that's your problem. It should say "Never". Also make sure on Sip->Lines your line appearance says "All" or else you will have the same problem. Hope this helps :) Greg Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original

Try this one. Took me a while too. http://www.snom.com/download/share/snom200-2.05c-SIP.bin > -----Original Message----- > From: M3 Freak [mailto:m3freak@rogers.com] > Sent: Monday, May 17, 2004 11:42 AM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Snom200 Firmware: I only see 2.04g > > Hello all, > > I've noticed several messages about the

Hello list, i am using: asterisk CVS-10/13/03-11:54:33 chan_capi-0.3.0 ATA-186 V2.16.1.ms over MGCP Situation: ISDN calls ATA ISDN speaks with ATA ATA-Phone presses Flash and speaks to another one (SIP/snom200) ATA-Phone hangs up ISDN talks to SIP/snom200 snom200 hangs up The incoming extension of ATA keeps busy for a time (20 sec?), even its not off-hook anymore! Any ideas? -- Swapping

Alright, this may seem like something relatively easy to do but I must be missing something or had a neuron misfire. I am trying to get The Status lights on my Snom200 hardphones to display the status of each one of my PSTN lines in my Asterisk server. Current Config: 3 X100P cards Asterisk CVS-02/25/04-18:06:52 5 Snom200 phones I am currently using the following macro to dial out

The snom 200 and 220 have five programmable buttons. Each button has a led that can be used to indecate if an extension is idle, in use, or ringing. A button pannel for the 220 is also comming out soon that will have 20'ish programmable buttons on board. This is a killer app for any company that has receptionists handle calls, and pretty usefull for everyone else. As a matter of fact,

Hi Steve, I am having this problem in which RxFax is still holding the file after receiving a complete fax. Somehow the zap channel is still active but on the fax client it was sent successfully. If you call the line it is still busy. Changed from phase 3 to 4 >>> MCF: 8c HDLC underflow in state 8 Changed from phase 4 to 3 Slow carrier up <<< DCN: fb DCN with final frame tag

Hello, After receiving and finally being able to configure my new Polycom IP 600 phone Here are my initial experiences: GOOD STUFF: - The sound is wonderful from both handset and speaker (711U) - The large multi-shade LCD screen is beautiful (for a phone) - The phone has an integrated Ethernet switch so you can connect a PC to it as a passthru - The AC adapter was included (small thing, but

Hi, We try ti hide the caller id at calls trought E1 in EuroISDN (Spain) using restrictcid=yes and doesn?t work. What can I do, thaks Pedro -----Mensaje original----- De: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]En nombre de asterisk-users-request@lists.digium.com Enviado el: mi?rcoles, 31 de marzo de 2004 12:00 Para: asterisk-users@lists.digium.com

I am looking to see if anyone has seen this problem before. I am setting the MEETME_RECORDINGFILE variable in a macro, then using the r option with the Page application to record the page. But the page is only recorded to the file specified in MEETME_RECORDINGFILE sometimes... Sometimes it works and sometimes it doesn't. When it doesn't work it places the recorded file in

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040106/3efdeb9f/attachment.htm -------------- next part -------------- Hello Though my SNOM 200 phone receive a voice mail but it doesn't show MWI on the LCD panel, Instead it keeps displaying "DND SW-REG,Call-log". Though I can access my voicemail using exten

Sorry I forgot the subject in the last post. When my snom200 receives an inbound SIP external sip call, it somehow rejects the call and with a busy tone. The debug shows the following error: channel.c:1142 ast_read: Exception flag set on 'SIP/sipphone-7796', but no exception handler what does this mean and how can I debug it further?? Thanks JC -------------- next

Hi, I have just been playing with the latest X-Lite.. It works fine with Asterisk.. As for codecs I tested G.711a/u, GSM and iLBC... iLBC is the only one that didn't work.. not sure why.. But the bigger problem is that when I call another extension that is using a Snom200 the call connects but there is no audio in either direction.. I have tried G.711a/u and GSM and while X-Lite shows that

Hello all, I've noticed several messages about the latest firmware on Snom's site, 2.05b, and today I see that another update is listed, 2.05c. However, when I go to the download page (http://www.snom.com/support_dl_en.php), the latest firmware version available for the Snom200 is 2.04g. Are the newest firmware releases not yet available, or am I doing something stupid? Thanks, Kanwar

Hi, in the Snom FAQ I found the following information: After staring up, the phone tries the URL given in the "Setting URL" of the phone. ... BTW this setting can also be set via DHCP. .... option tftp-server-name "http://192.168.0.9/snom200{mac}.htm" The documents used: FAQ-04-06-14-sf.pdf "Setting up DHCP for snom phones" FAQ-04-03-24-sf.pdf "How can I

Hi folks, in order to establish backward compatibility we made an image that automatically detects if the other side does not support RFC3264. Please try it out, we would be very interested if this image is a progress! http://snom.com/download/share/snom200-2.03b-SIP.bin Thanks, CS

On recent releases of the snom200 firmware, the MWI indicator will turn on, but won't turn off when the message has been checked. It works on firmware 2.03o, but not in 2.04g or newer. I filed a bug report with snom, but they're claiming it is an asterisk issue and that it should have been resolved. They suggested that I ask on the list. "Anyway, Asterisk had a bug where it