similar to: Intriguing * problem with voicemail signalling

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

Hi, Using 1.4.26.1 & DAHDI 2.2.0.2, FSK VMWI devices off a TDM840 work fine. With 1.6.1.[45] & same DAHDI, instead of the FSK spill I get a line polarity reversal. Stutter dialtone is generated as expected. Has anyone else seen this? Is there anything special I need to do for 1.6.1 to make FSK MWI work? Thanks, --Barry

Using a TE410P with Zhone 24FXS channel banks to power standard analog phones I can't seem to find out if it's possible to support FSK or voltage type message waiting lamps. I don't want to use stutter dial tone because of the dramatic difference in per phone cost. TIA

I'm trying to get the Telco MWI recognition working in asterisk-1.6-beta7. I'm told that it's supposed to work provided my telco support FSK MWI signalling. I have Verzon FIOS. I believe I have FSK MWI signaling as I can hear the standard stutter tone when I pick up a live handset in front of my asterisk connection. I have the Verizon line attached to a TDM400 card, port 4. I

I have never had to pick out a channel bank before but I'd like to use one with the Digium T-1 card to hook 8 analog CO lines to an * PBX. Is there a reference somewhere describing and comparing channel banks (old and new)? Can modern channel banks handle translating all the "new" analog signaling features into a T-1 format? For example, can it interpret the 1200 baud FSK

We are using Bellsouth 8867 phones on our TDM400B FXS lines (asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI (according to the manual it works with voicemail from the telco that sends a FSK signal). The dialtone stutters when a line has voicemail, so I know that I have the mailbox setting right in zapata.conf, but the light doesn't go on. I am also getting

I'd like to be able to configure Asterisk to detect and respond to message waiting indications from my telco, as I'm using the telco voicemail as a fallback in case the Asterisk line is busy, Asterisk or it's server is down, etc. Detecting either the FSK (preferred) or the stutter-tone, would allow Asterisk to notify me that there it missed a message. I see periodic queries about

Dear All, I am a newbie about asterisk. I have 1x X100P card 3x Sip phone I got aware of problem, after I saw the caller id on my sip phone. I noticed that if I receive a call from GSM Operator A, I can see caller id. But any other operator, I got no caller id, even my direct PSTN service operator. So at that moment I was using *1.0.9. than I changed to asterisk@home 1.3(1.0.9). I got same

Non-debug build of wxRuby allows the tip of the day to be visible on Windows. Also, I get the caret example crashes with page-up on Windows with the ANSI build of wxWindows. I may try the unicode build to see how that works. I''ve been up to my eyeballs working on a release of my company''s software. Once that''s out the door I can hopefully put a few more cycles

Does anyone have personal experience with a 5.8gig wireless phone (system) that has an MWI that WORKS with asterisk via fxs (in my case spa3k) generated MWI. I know the spa3k does stuttered dialtone but not sure if it generates FSK MWI. I see some that state they do but I also see reviews that say they don't. Doug

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

I have a Samba-LDAP PDC at an office and 5 BDC's at other offices. At corporate HQ I have a W2k Server and domain. I have properly configured an interdomain trust and Users in the Samba domain can get to sections on the W2k machine regardless of location. However, members in the W2K domain can only access shares on the PDC. Attempts to access shares on a BDC cause a user name

Hello, All :) Regarding to incoming caller ID on PSTN line, which one is best supported by asterisk: is it FSK ETSI or FSK US? I bought some caller ID converter hardware (convert DTMF to FSK and vice versa) but still asterisk can not detect it. The converter has a switch FSK ETSI or FSK US This is what I put in /etc/asterisk/chan_dahdi.conf ... cidsignalling=bell cidstart=ring ... If after

Okay, I can't find what might be causing this. Here is what I got: Asterisk server hooked up to a digital T1 line (full 24-channel) via a Digium card. Verizon has turned on caller ID on the first line (I can guarantee it is on as I can hear the FSK tones on this line but not the others). Using zttool an ZapScan() I have determined the following: 1) The RxB/RxD bits toggle from 1 to 0

Folks, I've tried to find a reference, but I've had no luck, and would appreciate your thoughts: I'd like to be able to monitor a telco line for Message Waiting Notification, however I cannot figure out if this capability is available. Detecting either FSK or Stuttered Dial tone would serve, but I can't find anything in the list archives or Wiki with clues as to how this might

Hello I've been googling for a couple of days now, but still can't figure out what to put in zapata.conf to get it to report CID. Unless I'm mistaken, France uses ETSI FSK for CID method and bell 202 as CID FSK Standard: http://img219.imageshack.us/img219/7207/linksys3102cid1jj7.jpg http://img219.imageshack.us/img219/4625/linksys3102cid2ld5.jpg Does Zaptel support those on Digium

Hi, I'm currently having problems detecting FSK BT (UK) caller id in our API (Pika boards). I have a recording to test on but it is giving me checksum errors. I'm wondering if someone from UK using BT lines could send me a recording with the FSK signal so I can have more data to work on? If you have something, please send it to paulo.astuser at gmail.com. I appreciate all help about

hi: in our country callerid is sent with fsk. but it will sent DTAS(dual tone alerting signal) first, then fsk callerid, then first ring. I search google, but didn't find the configuration method or patch for this. any good suggestion for asterisk to detect this? I have trid asterisk 1.4 and 1.6.2. thanks for help!! Regards, tbskyd

G'day list, It appears I got ahead of myself in believing I'd solved my CND (caller id) problem. My callerid.c change got it working on one of the handsets I have, but not the other. (Recap: The AU CND standard has an increased delay between the end of the ring signal and the start of the CND FSK data -- it's 500ms in US GR-30-CORE, and around 700ms in AU DC.002/TS030). I've

Callerid issue 1) if you run ztmonitor on the fxo line & call in do you hear the fsk tone if yes then we beleive the CAC is passing fsk 2) in chan_zap->ss_thread around line 4154 (current cvs) if you get to the callerid_feed at least once then if you get to chan_zap->ss_thread->callerid_get around line 4163 (current cvs) does this parse fail