similar to: VoIP gateway (2 FXO, 2 FXS)

Hi, After a long way of problems (shipping, customs, etc) finally I got Welltech working. Here below my comments. - The documentation is poor and have errors - The web configuration is not complete. However is useful for the basic configuration parameters. The command line is necessary for modify all parameters. - The software upgrade is easy. Initially the gw came with H323, we upgrade to

Hi All, I'm trying to configure 2 GS BT100 connected to asterisk and Welltech 2 ports FXO gateway. I configure WellTech 2ports FXO and GS BT100, both GS BT100 can call each other without any problem but when I tried to call a local extensions connected to my Welltech FXO gateway, I couldn't hear any voice on both ends. I would like to ask if anyone has ever encountered this kind of

Ok this is a simple question... What has been your experience with the WellTech 38xx series (I'm looking specifically at the 3802) VoIP gateway? I'm looking for a good (and hopefully not too expensive) VoIP/T.38 gateway for my office. Asterisk intergration is not a major factor at this time but may be later on. How well does it work? Is Echo a problem? Do the T.38 capablities

Hi all! I have the following setup: Phone lines -> traditional PBX -> Welltech 3802 -> VPN -> Asterisk -> Linksys PAP2/Welltech ATA-151 -> phone There is 2 pieces of Welltech 3802 (2 port FXO) connected to 4 (2x2) PBX extensions. Asterisk is a proxy here. Each device successfully register itself. I tried the setup above with Linksys and Welltech devices as well. I setup

I am interested in the wellgate 38XX FXO and FXS gateways (and other similiar units). My question is can outgoing call files use these devices??? Can I fashion an outgoing call file with a channel like: SIP/WellGate-1/5551212 (for the first port) or SIP/WellGate-2/5551223 (for the second port) TO these devices behave this way? Of course incoming calls I dont see as a problem. It's asking

I'm loosing hair at cosmic speed now for the past 10 days. Welltech's Wellgate 38xx/35xx FXO/FXS SIP hardware versions seem to have very buggy firmware possibly due to hastely done porting from H.323 firmware. Is there anyone on this mailing list who was able to: 1. setup a 35xxA FXS with all ports authenticating properly with *? or 2. setup a 38xx FXO to work as dial-in from pstn to

On 10/07/15 04:26, Charles Lepple wrote: > On Jul 9, 2015, at 9:43 AM, paul at paulcarmichael.org wrote: > >> Is there currently a way of implementing NUT with an Ovislink Chrome 1500 UPS? > > Not sure. There was a thread in February talking about an Ovislink Chrome 1000, but I don't think we ever resolved what was causing the "Device busy" error: > >

Hello all. I don't know how I got onto this list, but now I'm here I'd like to ask a question: Is there currently a way of implementing NUT with an Ovislink Chrome 1500 UPS? Is this even the right place to ask such a question? Thanks in advance and apologies if I'm in the wrong place. Cheers. Paul. -- Work: https://paulc.es

On 10/07/15 04:26, Charles Lepple wrote: > On Jul 9, 2015, at 9:43 AM, paul at paulcarmichael.org wrote: > >> Is there currently a way of implementing NUT with an Ovislink Chrome 1500 UPS? > > Not sure. There was a thread in February talking about an Ovislink Chrome 1000, but I don't think we ever resolved what was causing the "Device busy" error: Is there an

Greetings, I'm running latest * from CVS on FreeBSD 4.10 box. We've just bought several WellGate 3502A FXSes to play with till welltech guys fix the 3504a's registration bug. So far everything is working as expected, except the fact only ulaw and alaw codecs work with *. If I add allow=gsm or allow=g723.1 in FXS's ports entries in the sip.conf, no voice is heard from both

Hi again, Kind of sheepish about asking for help, as I have only spent a day banging my head off this... I got my new Welltech 3701a, 1FXS,1FXO gateway. I flashed it with what is seemingly the appropriate firmware (SIP V1.04). This seems to have gone ok, and it is now registering both ports ok with asterisk. For 1 minute I thought I was home free and and everything was just going to work

Now I have searched around and not seen anything to do this. I want to in remote locations were we need to have single or 2 PSTN lines for in dial as little hardware as possible and as stable as possible so that they will operate without user intervention. What I want to do is be able to take a single PSTN line in and go out through adsl for the Inet link. These would be in VERY remote

I have a number of Welltech FXS devices (running the SIP code) that I'm trying to register with Asterisk. Has anyone had any success doing this? If I have the Welltech set in peer-to-peer mode, I can call to and from the Welltech, to Asterisk, just fine. However, because it's in peer-to-peer mode, I can only call phone numbers that are in the static phone directory. The phone

I've been looking around for a small external sip fxo gateway, sending emails to possible vendors, etc, and can not seem to come up with anything that fits. Suggestions anyone? (No channel bank & T1 card suggestions, please. I've also just completed an eval of the Mediatrix 1204 which does not support the requirements.) The market between two fxo pstn lines (pair of x100p's) and

Hi all I'm fairly new to Asterisk, so be nice :-) I was wondering if anyone has been able to get the Welltech K1000A USB phone working on Linux. I see audio and HID drivers loaded when it is plugged in to my Fedora Core 1 laptop, but that's about all that happens. I've searched all the usual places (FAQ, Google, etc) but not found anything helpful. Asterisk is working fine with

Checking the earlier mails, it stated that the phones were $75 (100) & $85 (102) ref :- http://lists.digium.com/pipermail/asterisk-users/2003-June/013483.html Well, I just called Ovislink/dgtimes and was quoted $90 & $100 and the person said there was no price change. Anyone on this list actually bought them at the $75 & $85 rate ??? Regards...Martin -- Too much is just enough.

I got a Wellgate 3804A and need some hints: Both have public IP *.131=asterisk (1.6.0.1) *.133= Wellgate Wellgate 3804A settings (Line1~Line4): 1. Sip Config Mode: Proxy Primary Proxy IP Address: *.131 Primary Proxy port: 5060 Line1 Number: 1002 2. Security Config Line1 Account: 1002 Line1 Password: ****** 3. Line Configuration Line1: Type=FXO, Hunting Group=2, Hot Line =

hello everybody , i got a test setup with lanphone 101 connected to * and a welltech fxo 3802 also to * the extensions are configure so that i can dial from the lanphone to the fxo. although once on the FXO and having the dialtone, no of my dtmf dialing is being processed on the FXO. It keeps giving me the dialtone constatly. Everything is configured as outband DTMF (we

Hi there I have a Welltech Wellgate SIP device and I want to be able to do a supervised transfer. I've read that in order to do that I have to use flash hook. The problem is just that I can't flash hook with this device. I'm in contact with the developer of the SIP device but don't know what to tell him in order to get him to fix this. What is happening when you flash hook, I

I have this in my extension.conf: [incoming_28345474] ; 8862100 is the hotline number of the Welltech 3804 ; exten => 8862100,1,NoOp(${CALLERID(num)}) exten => 8862100,2,Wait(1) exten => 8862100,3,Set(CALLERID(num)=${CALLERID(num)}) include => fax2emailstart [fax2emailstart] exten => 3000,1,SetVar(CALLEDFAX=${EXTEN}) ; me exten => 3000,2,Answer exten =>