similar to: X101P problem with latest FreeBSD zaptel drivers

I have a TDM400P (configured with 4 FXO cards) in a box that was working fine from POTS lines extracted from a Lightspan via DSC's channel bank, but when I switched over to using an Adtran 616 (weird little box, takes an SHDSL circuit in that splits out 16 analog lines via an amp connector) the card no longer seems to be able to detect ringing. I've tried upping the rxgain with no

New server, running 1.2.9.1 with a Sangoma 4 port T1 card, wanpipe rev 2.8.4. I get this message after using a MeetMe room a few times: Jun 27 18:37:23 WARNING[1054] chan_zap.c: Unable to open '/dev/zap/pseudo': No such file or directory Jun 27 18:37:23 ERROR[1054] chan_zap.c: Unable to dup channel: No such file or directory Jun 27 18:37:23 WARNING[1054] app_meetme.c: Unable to open

I've been lurking on the list for quite a while now, and I hadn't seen much from people using FreeBSD, so I figured I'd post something. Yes, the driver in the ports tree for the digium card works! I'd heard reports that it crashes the box/etc, but I have yet to encounter that. I've had all the fun I can stand making it answer the phone, dial numbers/etc. The makefile for the

I have the following problem with outputting multilingual data to a file. I get (except for Korean) what I expect as result in the RGui, but when I use sink() to output to a text file loose the characters in the foreign languages. I post a small example below. Since I am not sure how well my email system as the list copes with all the different characters I have additionally created a pdf

Could someone please assist me soonest. when i run asterisk with one X101P card and a S400P card asterisk will run but the card will not work.this is the message i get: [format_jpeg.so] => (JPEG (Joint Picture Experts Group) Image Format) == Registered format 'jpg' (JPEG (Joint Picture Experts Group)) [cdr_csv.so] => (Comma Separated Values CDR Backend) [cdr_mysql.so] =>

Let me start by saying no, this is not the normal stupid echo question :) I currently have a SIP device and an X101P, and have had the usual echo issues and have played around with the various solutions, none of which are quite perfect (understandably).. however, my girlfriend is a little more picky than I am when she uses the phone, so I'm considering a Digium TDMXXB card for the house. My

All, I'm having some issues with an X101 clone. The machine is not plugged into the network right now, but I'll pull the configs and send them on shortly, but they are similar to the sample configs. Problem 1: "ZAP cannot create channel" For some reason, the cards hang after a call. It's pretty annoying since the only thing that will fix it is a restart of asterisk.

I'm having many troubles with x101p (orginal from Digium, wcfxo kernel module) on analog line simulated by a Cisco Router I'm experiency random hung up while zaptel doesn't recognize call progress (Italy signalling) Signalling is simple ignored as if someone hangs up on the other end of the analog line, on the asterisk end is it possible to listen the busy tone as generated from

Hi! I've bought a Wildcard X101P card to play a bit with asterisk. I'm just trying to place a call to a number, wait until the receiver takes the call, and then play one of the .gsm sound files. I'm in France, so first I tried modprobing wcfxo with opermode=1, but the DAA mode remained FCC, so I changed the opermode variable in wcfxo.c to 1 by hand and recompiled & reinstalled

Hi, I'm new to *. I just installed my X101P card with * from the source on Mandrake 10.0 and I test it. Everything seems to work fine. When I call at my home office all the demo ivr seem to work. But I have one question regarding * using /dev/dsp0. I only have one sound card on my system and it has to be use by my personnal PVR called MythTV. I though that * did not need a sound card to work.

To all: I am researching the feasibility of replacing our current PBX (ATT Partner Plus) with an * PBX. I have purchased an X101P card and I have * running of a FC2 machine. The X101P is connected to an extension on our current PBX. Many archives exists regarding X101P cards but I just need some guidance. First the X101P did not detect a ring, so I found an email where someone

Hi, Does anyone have any experience connecting Asterisk to a Meridian system using an ATA2 and x101p? The basics work -- I can make outbound calls, receive inbound, and use flash to transfer calls, but certain things do not work, specifically with calls from internal extensions. - Does the Meridian/ATA2 pass any kind of callerid info? We do not have external callerid, but I'm not even

Since the X100P/X101P/Clone cards does not work in all countries that use DTMF based Caller-ID systems, I've developed a hardware that you connect to a serial port and the PSTN. You then run a perl script "cid_logger.pl" as a daemon, and modify extensions.conf to call an agi script whenever a call comes in, and if it's on the X100 card it will get the caller id information

X101P with Ambient md3200 chip on it, with the zaptel wcfxo driver.... Just an indication of how many people have got this to work would be useful. Cheers Mark.

I want to speed-up dialing on X101P clone (Ambient modem). I probably must change wcfxo.c, but what line to change? (On usual modems, I can type ATS11=50 to get tone dialing much faster (50ms instead of default 90ms). After that, I can write configuration to nvram (AT&W) to be permanent)

Pause between successive incoming rings on my phone line is 4 sec, so when x101p do not receive next ring signal after 4.5 sec, call should be consider as ended. But, if caller hang-up, call is ended (Hungup 'Zap/1-1) exactly 8 sec after last ring, and my voip phone continues to ringing during that time (that's bad). I want to cut that time to 4.5 sec. How to do that? I tried to change

Hello I'm using an older PC from 2000 that we have lying around at the office to learn about Asterisk using Pound Key 1.0.1 (http://www.rpath.org/rbuilder/project/asterisk/). It's using an AMD Duron 600MHz, a Gigabyte GA-7ZX motherboard, and two FXO Astralis X101P clones that I bought through eBay. Here are the three issues I have. Sorry, forgot the floppy with dmesg, lspci, and

When x101p clone receive ring signal from phone line, my voip phone start ringing. But, if caller hang-up at some time, phone continues to ringing 10 second more. How can I shorten that time? Pause betwen incoming rings on my phone line is 4s, so when x101p clone (wcfxo driver) do not receive next ring signal after 4.5 sec, call should be consider as ended. What should I change to set that time

Hi I received the Asterisk Dev Kit Lite on Saturday and got a small PBX working fairly quickly using the config files supplied with the kit. This was on my desktop machine and the sound card stopped working. I turned the system off and moved the sound card to another slot to give it a different IRQ. On reboot, the modules zaptel, wcfxo, and wcusb all load OK and asterisk starts OK but there

Hi Newbie, or would you prefer to be called VoIP(y)? :-) Thanks for the advice, It's great to hear from somebody that has suffered in the same way :-) I've cc'd in the dev and user lists mostly so that others looking for the same issue (FXO PCI Master Abort) can find some info! - hope you dont mind... On the card itself. I am assured by the vendor that they had the card up and