similar to: Layer 3 VPN Question

The CDW part number is: 672205 And the cisco part number is: CON-SNT-CP7960 Hope this helps... In fact I think I will add it to the Wiki. ~c ------------------------------ Message: 11 Date: Mon, 27 Sep 2004 10:40:38 -0500 From: "W. Kevin Hunt" <Kevin@hbcorporate.com> Subject: RE: Cisco Downloads --> was --> Re: [Asterisk-Users] Cisco 7960 andAsterisk...not working... To:

You are correct... No glare on a PRI W. Kevin Hunt CCIE #11841 www.huntbrothers.com -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Steven Critchfield Sent: Tuesday, May 25, 2004 3:26 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] "Glare" condition - How well does asteriskhandle?

We have a strange echo problem. Maybe echo isn't the correct term. When we make a call f/ a SIP phone (we have several 7960's, some 3coms, and I've even tried a softphone, all on the same 100BaseTX network) to the pstn, if the person I'm calling has a PRI or channelized T1 f/ Bell, then the sound is perfect, couldn't be better. If I make a call to a person with a plain POTS

I am the one that placed the bounty. After it being there for 2 months and getting no takers (and very few if any people asking about it), we are almost finished writing it in house. I'll keep the bounty up untill we do finish our product so if anyone beats us to getting it working they'll get paid... W. Kevin Hunt CCIE #11841 MCSE, Linux+ SME www.huntbrothers.com >

An interesting article for those needing ammunition to sell Asterisk within their organisation or to others: "Is open source IP telephony ready for prime time? Yes" by Zenas Hutcheson, St. Paul Venture Capital Network World, 06/07/04 http://www.nwfusion.com/columnists/2004/0607faceoffyes.html On a related note, they also have an article arguing the contrary position (see link within

Has anyone tried to get dialogic ss7 trunking to work with Asterisk? I did some googling but nothing helpful turned up... Could a person get an intel dialogic and get * to see it like a zap channel? And use it for incoming and outgoing trunk access? -- respectfully, Joseph ------=============

Dear Asterisk Community, I would like to offer my most humble apology for the enormous stream of mail messages currently battering at your mailboxes. I was honestly trying to help a worthy cause. Please blame me and only me. Neither Russell nor Josh are at all to blame for this. Nor, for that matter, is Olle. I am the guilty party. Please direct all anger/outrage/hatred/etc. towards

Hello! I wanted to make sure that, in addition to my complaints, I make it very clear: Digium's support is excellent. The jury is still out on the usefulness of the TDM products. However, Digium has worked very hard to make sure that this issue is resolved. I actually got an e-mail from someone at Digium actually asking what they could do to make me happy! She even gave me

Anyone having problems with LiveVoIP lately? I am seeing failed outgoing calls. Calls that are being routed to wrong numbers. DID's that ring busy. For the pass 2 days I am unable to pass CID. Is anyone else have these problems? Can anyone recommend a Quality VoIP provider?

Hi- I have an upcoming application that requires use of PRI channels that are primarily used for high-volume incoming traffic, but that are to be used for outbound calling as well. Of course, one option is to have dedicated outbound channels reserved, but this is an inefficient use of channel resources. Normally PBX's are designed to have the CPE yield to an incoming call if a particular

Im having some problems with connecting a TNT to asterisk. The problem is when the call is sent to asterisk and signaling is done the RTP syncs however no audio is produced. Can someone give me some idea of how to accomplish this? I am using the standard configs and g711 and 729 do the same. No audio. Public IPs on both ends. No nat. Any ideas would be appreciated.

Hello, After reading the lists and taking reccomendations from TC, I have finally given up on the echo can built into asterisk. I am sick of hearing complaints from users, so the money spent on a hardware echo can will be worth its weight in gold. I am curious however, about some setup and component requirements. It seems as if every telecom place I call, either never calls back or doesn't

can you please share the cdw part # for the $ 10 service contract ? W. Kevin Hunt CCIE #11841 MCSE, Linux+ SME www.huntbrothers.com > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Christopher Jacob > Sent: Saturday, September 25, 2004 9:51 PM > To:

Hi Everyone, I've got a Cisco 3810 rig with 6 analog FXS ports, and ethernet. I'm wondering in anyone has got one of these suckers to work with asterisk in such a way that each FXS port has it's own extension. It speaks SIP, and I can send calls from asterisk out to it, but can't figure out how to get it to pass username & pw to asterisk when I try to configure it as a

Hey gang, We currently have a class 3 switch (CSX) that..well..it sucks. It does terrible CDR writes, doesn't support LCR, the list goes on and on. We want to replace this with several asterisk boxes each running one or two 4 port PRI cards. The problem is: I can plug in 20 PRI lines into the CSX (from PSTN) and have 1 come from CSX into asterisk. If 1 call comes in on each of the 20 pris,

Hi everybody, I will receive my CISCO 7960G tomorrow. I've ordered it as a "global spare" without any callmanager licence. Now I don't know if I can get firmware-updates so could please someone send me the SIP-firmware? Is the default firmware the "skinny" one? Wich would be better to use with asterisk? Thank you very much

After speaking with several people, and even participating in a forum of several other people with echo issues, I thought I'd share what we've done (well actually what our chief R&D engineer, Brett Bourn has done...) First let me say that normal cheapy PC hardware couldn't be made to function with out echo. We tried on both the single port Digium T1 card and the 4 port Digium T1

Hi, I recently set up the following in a production system (2.8 GHZ Xeon, 1 Gig Memory, Dell 2650). Telco - PRI - Asterisk - T1 - PBX I am getting an occasional noticeable echo on some of the phone lines (random inbound and outbound). Everyone I ask keeps telling me that I can't be having echo since I am on a PRI, which is a digital circuit. Ok, so I can't be having echo, but I am!

[Please excuse if this is a repeat; I initially tried to send it from a different account, and it's been held up for a couple of days awaiting moderation.] 1) What's the absolute minimum required (hardware-wise) in order to get one in-bound POTS line into Asterisk, and then have IP phones "inside?" [In other words, I obviously need a NIC -- but what would be the

The best place for Astri Con 2006 would definatly be Omaha, Nebraska! ;) very central ...ah one could hope. __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com