similar to: Zaptel - delay before dialing last DTMF digit?

I have a bit of a weird problem that I'm having great trouble debugging. I have a TDM400P PCI card with two FXO and two FXS modules. Both FXO modules are connected to BT lines here in the UK. Both BT lines have V23 Caller-ID, which works fine with Asterisk. Both asterisk and zaptel are fresh from CVS. Both FXO modules (channels 3 and 4) are in "group 1" for outgoing calls. My

We have some Excel spreadsheets stored on our Samba 2.2.8 fileserver. The permissions are set such that some users can write to these and some cannot, but they can all read them (the world-readable bit is set). When a user with read/write access tries to open the spreadsheet, there is no problem. The user is happy and productive and outside the sun is shining. Excellent! Have a biscuit! When a

Hello all, I'm having difficulty with setting up a mixed model using lme in the nlme package. To summarize my study, I am testing for effects of ornamentation on foraging behavior of wolf spiders. I tested spiders at two different ages (penultimate vs. mature) and of two different phenotypes (one species tested lacks ornamentation throughout life [non-ornamented males] while the other

I'm looking to handle 3 PSTN lines with my Asterisk server. I have a Digium TDM22B and Sipura 3000. The Sipura works great, but the TDM22B seems to have terrible problems with my board---virtually all peripherals need to be disabled in BIOS, and then there is terrible noise, terrible silence and virtually no ability to use DTMF in IVRs. I really wish the TDM22B worked, because I much

I'm having problems with a TDM22B. The FXO modules work fine. Both FXS modules fail to initialized. The error messages I see when the module loads: Init Indirect Registers UNSUCCESSFULLY. Indirect Registers failed verification. I already RMA'ed a TDM22B because of this problem. Now that the replacement shows a similar issue, I want to see if anyone else can think of something to

Yesterday, a low-duty production server that I maintain core-dumped. At the time there were only around 2 calls going through it. The strace on the screen made it look like it was caused by Dahdi. The machine is running asterisk-1.6.0.3 dahdi-linux-2.1.0.3 dahdi-tools-2.1.0.2 asterisk-addons-1.6.0 Kernel version 2.6.28 There is a genuine TDM400P (populated witrh 2xFXO cards and 2xFXS cards.

I just got my TDM22B, but the package did not include anything else, like datasheet. 1. Where can I download it? 2. Which outlets are FXS/FXO ??? (depending on the green /red card positions) 3. Does it need the extra power?? bye Ronald

Hi, I am using asterisk 1.4 with Digium TDM22B card. My system is running well except CALLERID. I have tried all options for cidsignalling, cidstart but no luck. Btw, I am living in Malaysia. From google web site, I found some one having the same problem with new version of asterisk but not in old versions. I do not want to try the old versions of asterisk. I really appreciate if someone can

Im getting the following error when I try to start Asterisk WARNING[16384]: chan_zap.c:765 zt_open: Unable to specify channel 1: No such device or address Nov 29 21:40:43 ERROR[16384]: chan_zap.c:6195 mkintf: Unable to open channel 1: No such device or address I'm using a TDM22B card. ============= # Zaptel Configuration File # loadzone=us defaultzone=us fxoks=1-2 fxsks=3-4 ==============

Hi, I have got my Asterisk server running with TDM400 card (2xFXO & 2xFXS). I originally had the system configured with a Panasonic fax machine on one of the extensions. Due to the high volume of fax spam, I figured it would be a much better idea to capture the faxes as TIF or PDF files to minimize wasted paper, etc. I have downloaded, compiled and installed spandsp and can see the rxfax

Is there a way to test if the motherboard is ready for a Digium card (PCI 2.2) ? I would like to know from a remote computer, where I have (root) access, if this computer is ready for a TDM22B. bye Ronald

Hi All; If one of my FXS port damaged at TDM22B because we connected the Telephone Line cable to the FXS port while it should be connected to the FXO port, then can I order S110M FXS Module and fix it instead of the damaged FXS? (This if we assume my problem that really the FXS port damaged). Rregards Bilal

Hello everyone. I'm new to Asterisk but got some basic functionality going last night and I'm just giddy to have my own PBX ;-) Sorry if these are silly questions: My Asterisk server has the TDM22B (2 FXO, 2 FXS) interface. I have a very basic PSTN line coming in from the phone company, I tried to get the most no-frills line possible (didn't pay for caller ID, voice mail, etc.). I

I'm debugging a TxFax problem whereby the fax transmission fails. I suspect interrupt latency--some interrupt routine is holding its interrupt too long. I have all unnecessary services switched off and X is not running when I perform these tests. Some transmission are successful while others fail at random points. I've noticed that after I boot Linux, load zaptel, wcfxo, and wcfxs,

Hello. I have this problem. In my asterisk box, I was running debian woody with asterisk package from backports.org. Last friday I upgraded from debian to sarge and change from kernel 2.4.18-1-686 to kernel 2.6.8-1-686, rebuild zaptel kernel module and also upgrade to asterisk 1.0.2. But now asterisk won't start. Here is more info #asterisk -vvvvvvvv (last lines) [chan_zap.so] =>

I need to reopen this discussion because it's impossible to run spandsp (and VoIP) under these circumstances. With zaptel unloaded, I see the following "vmstat 1" output: no swapping, an occasional disk output, +/- 1003 interrupts/sec., less than 10 context switches/sec., CPU idle 100%. A very quiet system. I load modules zaptel and wcfxo, and the system utilization stays the

hi there - I find i get a flicker on the penultimate frame of the effect in Firefox (1.04 and 1.06) i don''t get the same behaviour with IE. is this simply a limitation of the browser or am i doing something wrong ? cheers jonah -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, My attempts to build an R package on my Windows 7 computer using R V13.0 ir R V13.1 using R CMD build --binary <filename> have been failing at the penultimate step with the error message "running 'zip' failed" coming after the procedure has completed the MD5 sums step.The same build command on the same package completes successfully on my older Vista

Colleagues, (Running R 2.7.0) I have a script that I want to delete as it completes execution. The penultimate line of the script (before the quit command) is: file.remove("Scriptname") The script is executed as: R --no-save < Scriptname In OS X and Linux this is successful and returns: > > file.remove("x") > [1] TRUE and the file is deleted In Windows XP,

Hi All, I have the problem setting up TDM22B card. Steps what I have followed are: [1] compiled zaptel-1.0.9.2 & installed the same. [2] modprobe wcfxo /lib/modules/2.4.20-8/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg