similar to: Problem Starting RC1

I have a dial plan that includes a company phone directory as a main menu option. If they just sit at the main menu, after 20 seconds, they are transferred to the operator. If the user picks an extension from the directory, they are transferred to the proper extension. If the called number is not available, they are transferred into VoiceMailMain. They leave a message, and hang up. The hang

When I first to the "add extension" the "show dialplan" has the lines that say "SIP/" but after I do a "save dialplan" and a "stop gracfully" and restart the lines with "SIP/" are gone. ************************ "Show dialplan" before: ************************ asterisk01*CLI> [ Context 'default' created by

I have the standard parking.conf but extension 700 doesn't show up in my dialplan.... Why? I can dial 701 which tells me that I don't have any calls parked there. 700 just gives me invalid extension noise.... Should I have extension 700 defined elsewhere? Thanks parking.conf [general] parkext =a 700 ; What ext. to dial to park parkpos => 701-705

Asterisk don't running, because show this message WARNING[6949]: chan_sip.c:8865 reload_config: Section 'authentication' lacks type WARNING[6949]: chan_iax2.c:7491 load_module: Unable to open IAX timing interface: No such file or directory WARNING[6949]: chan_skinny.c:2587 reload_config: Unable to get our IP address, Skinny disabled WARNING[6949]: chan_oss.c:239 sound_thread: Read

Anyone having trouble parking calls? I haven't tried it in a while, but it seems to have stopped working. If I dial 700, I get a invalid extension. I have "include => parkedcalls" in the correct context, and I can dial 701, which tells me no call is parked there. Any ideas? Parking.conf is stock.

Humm, thanks for your reply But whats is the code in parkedcalls context. Please, can you give an example? Thanks very much. 2016-02-03 17:15 GMT-02:00, Richard Mudgett <rmudgett at digium.com>: > On Wed, Feb 3, 2016 at 1:05 PM, Vitor Mazuco <vitor.mazuco at gmail.com> > wrote: > >> Hi! >> >> I tried to use Parking Calls >> >> I use Asterisk

Hi I tried to install the * in my Radhat 7.3 machine. The "gmake" and "gmake install" went fine, but "gmake sample" gave me errors of "configs/*.adsi", "sounds/demo-*" and "sounds/*.mp3" errors. I created a dummy.adsi in the configs folder and commented out the "sounds/demo-*" and "sounds/*.mp3" in the Makefile to

Hi List, I am trying to locate some detailed documentation and sample configs. I downloaded and compiled Asterisk, and I haven't been able to find much detailed docs on the config files. The distribution I compiled and installed doesn't have any config files, and the handbook is good but doesn't cover all of the configs. Here's my specific problem, when launching Asterisk for the

Hi! I tried to use Parking Calls I use Asterisk 13, but I can't park any calls and it returns me [Feb 3 16:56:11] WARNING[1693]: pbx.c:12543 ast_context_verify_includes: Context 'ramais' tries to include nonexistent context 'parkedcalls' What is the correct code for put in extensions.conf? Can be this example below? [parkedcalls] exten => 700,1,ParkedCall(701) exten

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi i've installed asterisk by last cvs and i note res_parking.c is not anymore there; chan_capi-0.3.4b INSTALL file require: in /etc/asterisk/modules.conf insert the line: load => res_parking.so load => chan_capi.so running asterisk i get: [app_capiCD.so]Jul 21 15:32:26 WARNING[1076988448]: loader.c:242 ast_load_resource:

So I have read and read and read... google is my friend and the wiki is by brother... However, I am still unclear on what the preferred method of using the pound sign is. If the Pound sign is set aside for Transfer.. Then when I make an outbound call to my bank I can not "Enter my PIN followed by Pound" Likewise if I turn off the ability to transfer when initiating a call, my bank pin

Hello All. 1. I'm at first install ASTERISK (debian sid), and try to to make call by Kphone 3.1. For all my attempt I find in logs: Apr 18 16:05:17 NOTICE[81926]: File pbx.c, Line 999 (pbx_extension_helper): Cannot find extension context 'default' I check in extention.conf [default] section exist and has pattern which I send (for example 's', '1234'). In CLI I try to

I have an Ubuntu system and went into Synaptic and checked asterisk for installation. Once installed, I started it with /usr/sbin/asterisk -vvvgc and got the following output with several errors and notices. Do I need to do more or are these ok? I expected to have some conf files in /etc/asterisk but there is nothing there. Thanks! Created by Mark Spencer <markster@digium.com>

Ok, a little patch that adds a little functionality to call parking. With that, you can pickup the older parked call, if many are in the parking lot. The default exten to do that is 750, but can be changed by setting "parkpick => exten" on parking.conf , like [general] parkext => 800 ; What ext. to dial to park parkpos => 801-820 ; What extensions to

Hi, I'm new to asterisk and try to get it work with capi.so. When I try to start asterisk with "asterisk -vvvvc" I get the following errors. I couldn't find any hint on the net what may be wrong in my configs. Has anybody got a hint? Here is the error output: [capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Jun 23

I've built the latest CVS of asterisk -- not the zaptel or libpri directories, just the asterisk directory. asterisk installs successfully, but there are severe problems. I built this system in the past and ran it, but now building it again fails. This is the CVS as of this morning, 2003-06-13, but I had problems on 06-11/12 as well. After make; make install; make samples; make config, I

Hi List, I am facing the reverse problem as stated here.I am using ATA 186 to make and recieve call to * through OH323 driver. When I use G711 codec in the ATA to make call then then as soon as i dial an extension the * crashes with 'segmentation fault'. But the same scenerio works fine when i use 723 codec in the ATA .I can dial the number and extension very well/(I have 723 support in

I have 2 Grandstream HT-286 devices and an Asterisk server. The * Server is not using NAT and has port 5060 opened up. One HT-286 is using traditional NAT and the other HT-286 is behind a residential DSL router/firewall. I have the HT-286 setup as the "DMZ Host" in the router/firewall so that all incoming connections are forwarded to the HT-286. HT-286-1 ====== NAT FW ====== * Server

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Hello, I recently tried an upgrade of CVS on my test server today and found that the res/res_parking.c file is completely gone. This is where I had to go into the code every time I do an upgrade and change the code to allow for doublehash transfers instead of single hash transfers: That means that you need to hit the pound key twice to initiate a transfer instead of once. Because of our inbound