similar to: Unable to launch asterisk and connect to console. ?????

Hello group I just update to the newest CVS now I'm not able to get asterisk to start. No error during the make or make install I did a make clean before the make;make install Any help would be great!!!! Here is the output asterisk -vvvvvgcd Parsing /etc/asterisk/asterisk.conf Parsing /etc/asterisk/extconfig.conf == Binding realtime_ext to mysql/realtime/extensions_table == Binding

Looking at the error I tried moving chan_modem* out of the modules folder and asterisk started and its working again... Not sure what changed in the chan_modem_i4l.so but removing it from the folder fixed my problem. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric Hall Sent: Sunday, January 23, 2005

Hi all, I am trying to install asterisk on my system, the compiplation and installation process all seem to work fine (make ; make install ; make samples). But astersik fails to start. Is the sample configs not supposed to work out of the box? Even more confusing, it seems to fail at different points every time I start it, but this is probobly because of threads starting differently or something?

When I do a 'asterisk -vvvvvc' I get following, but asterisk does NOT stay up: == Parsing '/etc/asterisk/asterisk.conf': Found == Parsing '/etc/asterisk/extconfig.conf': Found

Hi. I'm trying to start a MGCP configuration in Asterisk but i have some basic problems. I hope that someone can help me. First ..how do set two call agents in the configuration files? How is the extensions.conf for MGCP?! I'm trying to start the Asterisk, and obtain this: [root@server3 asterisk]# ./asterisk -vvvc == Parsing '/etc/asterisk/asterisk.conf': Not found (No such

When I attempt to start asterisk with my modem setup listed it will not start attached are the error messages i get and also the modem.conf that i am currently using. Any assistance would be greatly appreciated. running CVS ver 12/7/03, modified only to allow the RxFax and TxFax to compile and run with it (from http://www.opencall.org) just e-mail me privately if you need more info Thanks in

Hello all, HI i am very new to asterisk and my boss needs me to investigate setting up asterisk for a new client. I have downloaded and installed (make, make install and make progdocs)asterisk on my personal computer and when i try to run it (./asterisk -vvvc) i get the following output below: NOTE: i am running REDHAT 9.0 on a 796MHz cpu machine: I am excited to be able to work with asterisk

Trying to config the latest Asterisk/zaptel with an Digium Wildcard and a single X100m FXO interface connected to a POTS analog line. Build and install of both work ok - I'm using Suse 8 on a dual Pentium box. I load the driver with "modprobe wctdm" and the LED on the wildcard lights up. Then I start Asterisk with "asterisk -vvvgc" and asterisk fails to start. The

Hi All, I am a newbie and having some trouble getting Asterisk to work. I have checked out zapata zaptel libpri and asterisk (both v1-0_stable and regular--in separate directories). All built according to the documentation I have found and installed correctly. I have modified/created zaptel.conf zapata.conf as attached. I get the following messages/error during asterisk startup. ==

I have a pretty basic Mandrake 10.2 w/KDE 3.2 and I installed Asterisk-1.0.1-2mdk. I installed the source of main and contrib from ftp, so at the install time I accepted all the packages needed to be installed too. The installation went smooth, but when I try to execute asterisk (#asterisk -vvv) I encounter few warnings I end with an error. At this point I didn't touch any conf file, I was

Hi, First i would like to thank the kind people of the list who have answered my previuos mail, but i am still stuck as asterisk still crashes upon startup, i have read the install article at http://www.voip-info.org/wiki-Asterisk+Step-by-step+Installation and i have search the asterisk archives, but i still cant get asterisk to work, i have tried reinstalling asterisk but it still complains and

I have an Ubuntu system and went into Synaptic and checked asterisk for installation. Once installed, I started it with /usr/sbin/asterisk -vvvgc and got the following output with several errors and notices. Do I need to do more or are these ok? I expected to have some conf files in /etc/asterisk but there is nothing there. Thanks! Created by Mark Spencer <markster@digium.com>

After doing an update from SUSE 9.2 to 9.3 and Checking out the latest from CVS, Asterisk crashes on startup with an apparent MySQL (res_config_register) error: # asterisk -vvvgc > asterisk_startup_error1.log asterisk: symbol lookup error: /usr/lib/asterisk/modules/res_config_mysql.so: un defined symbol: ast_cust_config_register The log is shown below. I've seen the posts

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here

Anyone have any idea what this is talking about. Here is my zapata.conf [channels] switchtype=5ess signalling=pri_cpe echocancel=yes echocancelwhenbridged=yes echotraining=400 callerid=asreceived group=1 context=default musiconhold=default faxdetect=incoming channel => 1-23 Here is my zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 # set this to 1-15,17-31 for E1 dchan=24 # set this to 16 for

hello, I have been using asterisk now for about 2 years now on a RH8.0 it is our main call gateway. I have on the box 3 T1 TDM cards connected to 2 Rhino channel banks (FXS) and 1 CAC Access bank I (FXO) with so many softphones and ATA 186s. It has been working good till today some few hours ago. i just discovered that there were no dialtone on the phones. Asterisk did not spit out any error, it

Hi, Ive been struggling with asterisk for a few days now. I understand pretty much how it works and how to tie things together (SIP -> SIP internally works fine etc), but just cannot get asterisk to work with an X100P clone (its a Ambient MD3200, if that means anything to you guys). I have tried (initially) asterisk 1.07 with zaptel 1.07, and now Asterisk CVS-HEAD with zaptel cvs. Both give

Skipped content of type multipart/alternative-------------- next part -------------- [root@LINUXVM root]# asterisk -vvvc == Parsing '/etc/asterisk/asterisk.conf': Found Asterisk 0.4.0, Copyright (C) 1999-2001 Linux Support Services, Inc. Written by Mark Spencer <markster@linux-support.net> ========================================================================= == Parsing

Has anyone had any luck with PostgreSQL and Realtime? The realtime instructions on voip-info seem pretty straight forward... just not woking for me. I've included all of my config files below, and my console output. Entire console bootup output: [root@abox asterisk]# /usr/sbin/asterisk -vvvvvvc == Parsing '/etc/asterisk/asterisk.conf': Found == Parsing

Hi, I'm trying to set up a call-back system using auto-dialout files. I want the call to be terminated when a specific timeout (defined in the .call file) is detected. Both parties should then be hangup. The problem is that the timeout is never detected... How to solve this? Thank you, Pierre .call file ---------- Channel: IAX2/:@xxx.xxx.xxx.xxx/0111111111 Callerid: 111111111