similar to: Polycom IP 500 Voicemail

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

While I know this is not a true asterisk problem, I figure someone where may know. When you click on Messages and it gives you the count of Urgent, New, etc. How can you make the phone gather that information? For example, my phone shows me there is an e-mail. It also sends an e-mail. Yet, when I click on message before I connect to the contact center, it doesn't have any counts. Here is

I think Polycom has added another feature that nobody wants. With MWI configured, and a phonexxx.cfg that has this: <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.subscribe="" msg.mwi.1.callBackMode="contact" msg.mwi.1.callBack="XXX" msg.mwi.2.subscribe=...> </msg> Under 1.3.4 and earlier, the phone would immediately

All, I'm using Asterisk 1.6 and using Polycom 500's with SIP firmware 2.1.3. I can not seem to get the Message Waiting Indicator to work reliably (and in my opinion correctly) with voicemail. I've got the following in my phone.cfg: <reginfo> <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.callBack="*97"

Hi Guys Just a quick question regarding on the 501, has anyone been able to configure the transfer button and messaging buttons to work with asterisk? Can you share a configuration to do this? Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060301/df504eef/attachment.htm

Greetings, The Polycom SIP 1.5 Admin Guide says this: "3.1.8 Connected Party Identification Where possible, the identity of the remote party to which the user has connected is displayed and logged. The connected party identity is derived from the network signaling. In some cases the remote party will be different from the called party identity due to network call diversion."

Hi all - This isn't really directly Asterisk related, but has anyone successfully set up a Polycom phone to register two lines on two different Asterisk boxes? I can get the first line to register, but the second one does not. I can still place calls from that second line, which indicates to me the server, user, and secret are correct. I'm running the newest 2.6 series firmware with the

Hi, I have lookedaround and don't see this anywhere. Is there a way to tell the ip500 to not make the aural MWI blips?

All - I've been muddling around with this for a few days now.. and I'm trying to figure out why I am not receiving more than one phone call on each polycom 501 phone. I can make more than one phone call out, but not receive another one in, while on a call. Has anybody seen this behaivior before, or is there something simple in the config i'm missing, like.. maxcalls.. or

Hey all, I'll give my reseller a call for support in the morning, but I usually have better/faster luck on the list. I've got a SoundPoint IP500 that I upgraded to BootROM 2.6.2 and SIP image 1.5.2 on someone elses advice, I forgot to change out the old config for the new when I loaded the image up (I guess the config changed a bunch between 1.5.2 and 1.3.1) I was prompted with an error

Actually doing both sounds good to me. Can you explain further about ringing them all at once? Here is how I tried to make mine work and failed... {global} PHONES0=SIP/2000 PHONES1=SIP/2001 [local] exten => 6001,1,Dial(${PHONES0&PHONES1),20,trf) When I dial 6001 I see my debugger tell me that I am using the wrong syntax. Do you know the correct syntax for ringing them all at once? I

Hello All, I have Polycom IP 500 phones which I would like to have message waiting indicators on. So far, I have my system running well but the problem I am seeing is that MWI doesn't seem to tell my phone that it should display a MWI state. The light does not show when you have message nor is there any indicator on the text lines of a message waiting. The wiki doesn't cover this

Hi, does anyone have the setup for go2call ? I have digium boards and quicknet linejacks and phonejacks. The cards work fine in asterisk without the g729 or g723.1 for the phonejack. I will like to do SIP origination using the codec in the phonejack and linejack g729 or g723 and send the calls to go2call. Anyone has the setup for this ? Or similar setup to a SIP provider using g729 or g723

We're interested in leasing roughly 15 Polycom IP-600 phones. Does anyone have a vendor that they can recommend for this? Scott

(new asterisk user - currently setting up Polycom IP600 phones) Does anyone know if it's possible to make a sip phone instantly pick up on speakerphone when a particular call comes in? Eg so that you can quickly bother someone across the office without making them reach for their phone?

Hello; I am using vicidial which is using asterisk 1.8, mean while when the extension has voicemail, I always see the red light on the Polycom and hear the beep sound (toot toot) in period time. Also, I can see at the LCD an option to select it for accessing the voicemail ?but I am facing the following problems: 1) The red light and the beep: How I can let the Phone only have the red light

With my thanks to Brian West and his offering in the thread, "Subject: Re: [Asterisk-Users] Remote reload Cisco 7960" I offer PolyReboot.pl, a perl script for rebooting Polycom IP Phones PolyReboot.pl takes an IP address as a single argument and reboots the phone. You must have a cfg file in the Polycom style, i.e., 00ab00cd00ef.cfg - all lower case. Further, you need to use ftp for

Anybody ever managed to implement a solution where one could forward a voicemail from one * server to another? Dominique

Don, All you need to do is configure your VM button on the phone via the cfg files. You setup the phone to look to an FTP server for config scripts and then setup the scripts to work as needed. Here is an example of where you set this VM button from my file called <mac address>-phone.cfg... <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.subscribe="1006"

What is required to get the mwi to work? Is it more of a phone subject or *? I have the mailbox= line in sip.conf, but only one extension is named, and in some of the examples, I have seen that there are two... What is that all about and how does it affect the extensions.conf and voicemail.conf? Thanks again..... Just some background as you start seeing my lists, I just started my own business