similar to: SPA-2000, call for help testing echo issues...

My SPA-3000 finally arrived and I'm trying to get the FXO port on it to work as if it was a X100P card as far as Asterisk is concerned. I have Asterisk dialing out over the SPA-3000 FXO port no problem. The issue I'm having problems with is having the SPA-3000 automatically forward all incoming PSTN calls to the Asterisk "mainmenu" context (or ext I guess). Currently the

After trying everything under the sun to get rid of echo on my X100P, I'm curious if anyone managed to solve the echo issues by switching to a SPA-3000? As well, if you have multiple SPA-3000's, can you create dial-out groups similar to the Dial(ZAP/g1) functionality? Thanks. -- Mike Benoit <ipso@snappymail.ca>

I am having trouble getting transfers to work when a zap channel is part of the call. I have a couple SPA-2000's and some X100P cards as my setup. This is what I'm trying: Dial number from phone: -- Executing Dial("SIP/206-2c61", "Zap/1/#######") in new stack Currently on call: -- Called 1/####### Press flash to place call on hold with SPA-2000: --

I recently upgraded from a few month old CVS version of Asterisk to v1.0.1, and dialing out through my SPA-3000 stopped working. Notice right after INVITE, in the old CVS version, it includes the number I'm trying to dial (8019596) which works fine, however in v1.0.1, it doesn't include the number and of course the dial fails. Did a config option change out from underneath me or

Been having a problem with my two Sipura 2000's dropping calls from the SPA-2000 side. Seems the calls are dropped right before the "Next Registration" time. Calls drop about ever 60 minutes or so. I have dialed from one port to the other and let it sit. After about 60 minutes or so the calls get dropped. System details are below Asterisk ver. CVS-HEAD-11/27/04-23:42:45 RHEL 3

Hi, I have not implemented any of the spa-2000's yet. Do they work ok with asterisk? Is the 2000 capable of having 2 FXS extensions off each one or is it two fxs ports with the same extension?

Hello. Has anyone run into problems accessing voicemail with the Sipura SPA-2002's? Our SPA-2000's work fine (registers fine, able to make and receive calls properly & also able to access voicemail). We've configured the 2002's exactly the same way. However, with the SPA-2002 we're unable to access the voicemail system (though it does register fine and is able to

This is my setup: SPA-2000 -> Asterisk -> X101P (x4) -> PSTN 3-way calling works fine if I use flash and dial just local extensions. Or even if I use flash and dial one local extension, and one remote party over the PSTN. However, as soon as I dial from my SPA-2000 out over the PSTN, and hit flash the call hangs-up about 50% of the time. The other 50% of the time it puts the call on

Hi All, I have a asterisk box that is now on its own static address on the net.it was originally behind a nat firewall. The problem I have is that the remote SPA-2000's that are behind nat firewalls now fail. here is relevent sip.con entry [2001] type=friend username=2001 host=dynamic defaultip=81.178.77.67 allow=ulaw dtmfmode=rfc2833 mailbox=2001@local context=sip

Hello All! I am in the process of assembling an asterisk-based phone system for my office - using SPA-3000s to connect the network to the PSTN. I am wondering if anybody else can get (or has already seen) the same behaviour out of their 3000. The short version: Send multiple Calls to the SPA's FXO port at the same time it is re-registering with Asterisk. SPA HTTP Configuration:

I've been trying to get fax reception to work using an SPA-2000 to ring the fax machine or modem that's taking fax calls. I was curious if anyone else had tried something similar, and if so, had any luck getting it to work reliably. I've been able to get it to work, but it isn't reliable. (Pages/lines of black dots result more frequently than not.) The incoming lines are FXO

Hi list, After successfully configuring Linksys SPA3000 and SPA3102 devices as Asterisk PSTN gateways, the only thing I can't get working is the PSTN Caller ID. The analog and SIP phones I've used can both display CIDs for internal calls, while the analog model also displays CIDs correctly when attached directly to the PSTN line. However, when PSTN calls come in via the SPA

I have my main * box setup for all incoming and outgoing calls to and from our SPA-2000's. I have now setup another * box in a different location and I would like the SPA's to send all outgoing calls out through the new * server but continue registering with the old * server so all incoming calls will still be routed through the old server to our SPA's. In the SPA-2000 config

Hello, In my quest to create several proof of concepts for what can be done with Asterisk, I've run into a bit of a problem. I have a pair of SPA-2000's acting as off premise extensions for an analog line. When a call waiting call comes in, the caller id information makes it though the ULAW codec and displays on the caller id box, however asterisk doesn't seem to want to pick

Hi All, Last week I started hearing a huge amount of local end echo on incomming calls. I am using a Sipura SPA-3000 as my FXO connected to an SBC POTS line. Echo cancellation is enabled in the SPA firmware. As a test I switched to a Digium X100 card the still lives in my server but the echo was about the same. I have both Polycom IP600 and SNOM 200 phone, which both hear the echo. I'm

Hello, Before throwing in the towel with my Sipura 3000 has anyone had much success with that adapter connected to a door phone? In our setup a doorphone is connected to the SPA's fxs port. When a visitor rings, asterisk calls a group of Polycoms and the person who answers has to enter *1 to trigger the door opening. However it seems the SPA doesn't relay the DTMF's to the

Hello all, I have a new Sipura SPA-2000 that I am trying to configure beind a NAT. The SPA is able to register to the asterisk server without a problem and the SPA can make calls to other extension that are not behind a NAT. However, when I try to call the SPA from another extension, the extension connected to the SPA rings, the user at the SPA answers, and there is no audio in either

I've had an spa3k in service here at the house for a while now. After some initial wrangling, it's been working okay. I've had to reboot it a couple times and have noticed something rather annoying though. My setup is pretty simple and, dare I say, common. I have the SPA-3000 "inline" between my incoming POTS line and the internal house phone. It's setup to deliver

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before damage to the the adapter occurs? 2. For spa-2000,

Kevin Walsh noted that his SPA-2000 takes time from his local NTP server in a post back on Fri June 25. Q: Where do you tell it to use NTP? I'm a bit confused as to where my SPA-2000 is currently getting its time. I told it GMT-5 in the misc section but it doesn't really tell me where its going for this. Is it just broadcasting looking for ntp? The net of my problem is that it is 1 hour