similar to: P32mxi

Everyone-- Here's a cost analysis, rather crude and inspecific, of using Asterisk to implement a phone system. I'm really quite naive and new to all this, so I'd appreciate any corrections, tips, pointers, etc, from those in the community, who have far greater experience, knowledge, skill, etc. than I. Am I forgetting something important? Am I way off in my estimates? The Minimum

Hi list! The stability of * with fax (or the lack of it) is causing me headaches. To solve it, I was thinking to put a TE205P card in the * box, connect the E1 pri on one port and a channelbank (I was thinking of the Rhino) on the other port in T1 mode. (Has anyone tried this??) The TE205P supports channel bridging which sounded like the ideal (but not cheap) solution when combined with a

Currently number of error reporting register banks is hardcoded to 6 on AMD processors. This may break in virtualized scenarios when a hypervisor prefers to report fewer banks than what the physical HW provides. Since number of supported banks is reported in MSR_IA32_MCG_CAP[7:0] that''s what we should use. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> ---

Apols if there is already an answer to this on the forum but couldn't find it with Search... I'm new to Linux and to Wine. I have just made the conversion from Windows and run Ubuntu/Hardy - my Windows box has a h/w failure. There are some facilities I need urgently from Windows(XP) that I haven't yet sussed in Linux, notably the ability to edit and store multipage Tiffs and mdi docs

Currently number of error reporting register banks is hardcoded to 6 on AMD processors. This may break in virtualized scenarios when a hypervisor prefers to report fewer banks that the physical HW provides. Since number of supported banks is reported in MSR_IA32_MCG_CAP[7:0] that''s what we should use. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> ---

Attn: PRESIDENT/CEO. <p><p>REQUEST FOR URGENT BUSINESS RELATIONSHIP First, I must solicit your confidence in this transaction; this is by virtue of its nature as being utterly CONFIDENTIAL. I am Dr.ADAMS IBRU,the assistant Director (Banking and Treasury Operations) with the UNION BANK OF NIGEIRA PLC, (UBN) Lagos, Nigeria. I came to know of you in my private search for a reliable and

Hi all, We are about to make our first channel bank install. This will be a one PRI outside connection and up to 70 extensions. As the schedule (and the budget) is pretty tight, I would like to learn a little bit more about general experiences with channel banks, like echo cancellation problems, Caller ID usage, etc. TIA, Paulohm

I am hoping that this proposal will generate a lot of feedback, and there are many different topics to discuss. When replying to this email, please change the subject header to something more specific, but keep the [global-isel] tag. Thanks, /jakob Proposal for a Global Instruction Selector It is becoming evident that we need a replacement for the SelectionDAG-based instruction selector. This

> On Feb 21, 2019, at 12:18 AM, Quentin Colombet via llvm-dev <llvm-dev at lists.llvm.org> wrote: > > Hi Matt, > >> On Feb 20, 2019, at 4:49 PM, Arsenault, Matthew via llvm-dev <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: >> >> Hi, >> >> Some operations on AMDGPU require operands which must be in a register

Hi, Some operations on AMDGPU require operands which must be in a register bank that is impossible to copy from another. The operation needs to be rewritten in a complex way to avoid the illegal copy. Currently if I correctly report the required register banks in the operand mapping, RegBankSelect happily inserts the illegal copies, somehow concluding they are cheap (I would at least hope

U-boot for the arndale board splits the memory in 8 contiguous banks and rewrites the memory node. So most of the memory is lost. As the frametable is only able to handle contiguous memory, use the first contiguous banks and warn if some of the memory banks are not used. Signed-off-by: Julien Grall <julien.grall@linaro.org> --- xen/arch/arm/setup.c | 23 +++++++++++++++++------ 1 file

Hello. The procedure so that it works you can find in: http://www.voip-info.org/wiki-Convert+WAV+audio+files+for+use+in+Asteris k a the files .wav chmod 755 file.wav sox file.wav -r 8000 file.gsm resample -ql chmod 755 file.gsm in extensions.conf xxxx=> xxx,x,playback(file) Ing Javier Rios Ing de Proyectos 04167285748 212 2637246 /2637187 -----Original Message----- From:

Hi Jean-Marc, As I told you, bank is a reserved keyword in Analog Devices compiler for Blackfin architecture. So we need to change the variables named bank to something else. Here's a patch that changes bank to bnk in the 3 concerned files. (Hope the format is OK) About my previous problems with the Blackfin: -> strange block repetition that could be cancelled by the AEC I was busy

Shoval, Interesting Mention. I agree, most people don't have CO exp. And I wish daily I had enough. Understand that what I mean by my e-mail is consumer side FXS ports, in broader terms, I mean, customer picks up a phone line, it signals a channel bank which signals *. 24 of those channels. Not channels equipped to Send Signal to the CO that a loop has been made.. meaning FXO. 24

When using a channel bank for analog handsets, you have a couple options in the way you handle transactions involving the analog handsets and origination. With immediate set to no, it appears to me that soon as a digit is pressed after going off-hook, the single digit is taken and processed against the context that the channel is associated with from the configuration in zapata.conf. With

In the 'me too' vein, I also have an untested 3624 here on the shelf and am waiting on a shipment of T100 cards to play with. Documentation is very hard to come by. Alcatel are certainly the owners of the Mainstreet product line but, without a support contract, any documentation they may have is essentially unavailable as their per-incident fees for support cost more than most of the

Just wondering if anyone has tried MAC OS X and panther. I will like to do SIP to H323, not sure if this will be possible on the MAC because of the Libraries PWlib and OPenh32 for Linux.. Just curious.. Anyway, anyone has an easy guide (step by step) to setup oh323 with asterisk. I saw a guide but i am not very savy on linux. thanks, Francisco ----- Original Message ----- From:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've been struggling with an ongoing problem the last month. Here is the layout of the wiring: T1 from ISP > DiTech Echo Cancel device > Voice Channel-Bank (same) T1 from ISP > (same) DiTech Echo Cancel device > asterisk1 server zap card > fax channel bank (same) T1 from ISP > (same) DiTech Echo Cancel device > asterisk1

On 10/3/06, Roman Levenstein <romixlev at yahoo.com> wrote: > Hi, > > Few more questions that I found while trying to develop a new backend. > And sorry if I ask too many questions. I only have answers to some of them: > 1) My target (embedded processor, which is a "not so direct" successor > of Z80 family of processors) does not support SELECT, so I was looking

Hi all, To solve my need for dial in modems, I've hit upon an idea: buy a used T1 "analog" modem bank like a Lucent Portmaster that takes in a T1 and provides several 56K modems. This is overkill for a lightly used dial in service, but the prices of these boxes is so cheap (~$300) with ISPs going away from dial in service that it makes sense. This is how I imagine it would work: