similar to: tdm (and x100p?) echo - fix is coming!

Thanks for the reply Bill. I am aware of the interrupts problem. To solve it I have already disabled my serial ports freeing up interrupts 3 and 4 and these are allocated to the two cards. This was done 2 months ago and has not solved the problem. Is there any way that something can wake up every now and then and generate these two interrupts? My current /proc/interrupts is as follows:

I know the recommendation it to not run more than 2 T/E100P's in a system but what about X100P's.. Usually there are 5 PCI slots in a system, has anyone tried 5 x X100P's in a system? Later.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Hey all, ? I'm trying to get an E400P and 2 X100Ps working together in the one box and don't seem to be having much luck. ? I can get the two different types of boards working separately, but not together.? I've made calls on both the X100P and have seen sync and correct signalling on the E400P.? But when I try to enable to configs together I get the following: ? modprobe wcfxo

Hi, I'm thinking of purchasing a TDM400P card and was wondering if anyone has experienced any echo issues with phones off these cards connecting to the PSTN via the X100P cards? I have had my fingers burnt with a Voip phone > X100P. Cheers, Taff. --------------------------------- ALL-NEW Yahoo! Messenger - sooooo many all-new ways to express yourself -------------- next part

List members, Is it possible to record outbound analog calls using an X100P? I was asked if I knew how to record all calls for a shop with 4 analog phones transparently to the end users. I thought Asterisk was a good fit for this and I envisioned using either Digium TDM400Ps or Sangoma A200s with 4 FXO and 4 FXS modules. The FXO modules would be connected to the existing PBX and the FXS

Hi, I know this seems to be a hit topic at the moment but no matter where I look I can't find an answer. I have got a simple Linux fedora core 2 installation, asterisk running and 2 X100Ps' and 1 TDM400 with the FXS modules (thou I've taking this out to simplify things). Sometimes and not always after hanging up on the Zap channel the box will do a kernel panic, or just loading

For those that have had X100P echo problems, it seems that somewhere just prior to Asterisk CVS-12/04/03-14:24:40 it has been fixed to where its hardly detectable for just a couple of seconds at the start of a call. (I use to have it rather bad for the first 15 seconds or so.) I'm using DECHO_CAN_MARK2 with KFLAGS+=-DAGGRESSIVE_SUPPRESSOR and echotraining=yes echocancel=yes

For those using the new tdm fxo modules, please review and add your comments to: Bug Description 1898 tdm fxo does not sense broken pstn line 1899 tdm fxo senses pstn line disturbances as ringing 1902 tdm fxo echo when calling from sip phone There is at least a suspicion on my part that bug 1902 might be related to specific "systems" that have not yet been diagnosed or

Greetings all, I've just put two X100P cards to my box and despite trying everything I can find on the web, I can't get the second one to work. I've edited /etc/modules.conf so that ztcfg doesn't run automatically. To start, I run: /sbin/modprobe zaptel /sbin/modprobe wcfxo /sbin/ztcfg /sbin/modprobe ixj and ztcfg says: ZT_CHANCONFIG failed on channel 2: No such device or

I know the X100P cards are not supported by Digium any more, but for home office use, are they still acceptable? I have two POTS lines, one residential and one business line comming into the house. I'd like to get both into my * server and $15 total compared to > $100 for the newer TDMxxx card sure is desirable. Having said that, will the sound quality, functionality, stability, etc. be as

I was told the X100P will have issues if installed on a line with a DSL connection. Is there a card that will work correctly on a DSL connection? Thanks!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040504/6de6226b/attachment.htm

I have two grandstream budtetone-100 and cisco 7960g phones. When I talk via speaker phone on either of the phones I get a lot of echo. Any suggestions? Also how do I turn on the mark echo canceller. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of asterisk-users-request@lists.digium.com Sent: Tuesday, April 13,

I am using 2 X100P clone cards in my asterisk system, and have one phone line plugged into the 'line' port of each card. On one of the cards, I also have a cable plugged into the 'phone' port and this cable is then connected to the modem on my PC so that I can use it for dial-up. I thought that this would then allow me to do dial-up and at the same time it would lock the port so

> > First, ensure the TDM card has been defined to match the telephony > standards for each country where the card is installed. Bad echo on these outside North America is likely to be because of impedance mismatch. Echo cancel isn't likely to properly fix it. I was surprised at the lack of info about setting up the TDM cards for various countries. I eventually worked it out from a

After scouring the list archive and not finding the answer I decided to post to the list. I'm sure the answer is glaringly obvious but please bear with me. Using Asterisk, I'm tasked with setting up a SOHO with 5 analogue (FXS?) lines and a number of soft-phones for internal extensions. I'm confused by the telephony hardware needed for this exercise - 1) I need the equivalent of two

We have been pretty much able to solve our echo problems, except for the primary mode in which we desire to operate our system. See system diagram at bottom. Prior to making adjustments to cancel echos (all echocancel=no): Call Type Result (Before) --------- --------------- CP <- LEC PRI * TDMoE * FXO -> AP

I get echo on my X100P for about 15 seconds then it disappears. Believe me, when I get a chance I'm going to tweak it since my wife nags me about it. I converted my house over to *. My setup: Compaq Deskpro EN SFF P3 500 Dual NIC for real IP and internal IP X100P Card for PSTN. Cisco ATA186 (two cordless phones for the old lady) Cisco 7960 Phone Cisco 2621 w/ 2 FXO's and 2 FXS (Fax is

I still have echo during the first 15 seconds (or so) of each call, and the exact same thing is happening with either of two X100P in the same 2.2ghz system. asterisk# cat /proc/interrupts CPU0 0: 198457690 XT-PIC timer 1: 60 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 0 XT-PIC usb-uhci 8: 1

If anyone is looking, I just ran accross an ebay auction for X100P Cards at what I thought was a very reasonable price. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3046843672&category=48483&rd=1 --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software -------------- next part -------------- An HTML attachment was

Hello all We have tested for a mounth or two an asterisk PBX using one T1 channel bank with 24 fxs and one TDM400P digium card with 4 FXO modules. This worked with minor problems, the most notorious being some sporadic static noice or failure in the first FXO module on the wildcard. Now we have a client with 12 pstn lines and 48 extensions and we are trying to deploy an Asterisk PBX server