similar to: SNOM 200 using GSM Codec dtmf problem

Hello all, I'm becoming mad in trying to solve that issue. If I make a call from any of the phone here (I have some Grandstream and a couple of Snom105 - quite one of the best phones i've ever seen, this last one), to an outside IVR system, if i try to send dtmf to choose one of the IVR options, i notice in the /log/asterisk/messages this line: WARNING[43028]: Discarding too big frame

does anonybody know what is the status of gsm codec in snom phones ? they were some issuses in archives, some problems so i would like to know what is the actual status. best regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/ majo at sunteq dot sk

Hi all, I have problem using DTMF on Snom Phones (300, 320 and 360) I read they use in preference out-of-band DTMF , and if the remote system does not support it they default back to inband. I would like to use DTMF as out of band , and I defined dtmfmode=rfc2833 in the peer configuration. Nope, I am no able to access any ouside services using DTMF; Another kind of phones, ATCOM AT320, can be

Anybody has figured out why asterisk + snom have such bad quality using GSM? When I use GSM I see such messages dumped on asterisk console: WARNING[14351]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 2 frames WARNING[14351]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 2 frames WARNING[14351]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect

hi, i have connected a SNOM 200 to the asterisk. here are my settings, Codecs ------- Default codec - g.711u/g.711a Packet size - 20ms Negotiation - Interoperable Type - 160 DTMF ---- Inband - negotiate Outband - negotiate Payload Type - 101 when a call comes to the SNOM or when making an outdial, following warning messages are coming on asteisk, WARNING[1209214400]: File dsp.c, Line 1198

Hi. I'm not using snom phones for a while, but now I want to test again them and I'm gonna buy a snom 200 & 105 . Some times ago I had a snom 100 , and gsm wasn't working with *. How's now the situation? the snom gsm works well with * ? Thanks for any info, Matteo. -- Matteo Brancaleoni Espia System Administrator Email : mbrancaleoni@espia.it Web : http://www.espia.it

Hello asterisk-users, i got a simple read configured as an extensions command. it does not detect the dtmf digits all god 0123456789 gives something like 0223455789 what could this be the issue ? i'm using g711u law with inband. i tried to use outband but i got hardware like FXO's that don't support outband -- Best regards, Danny

I recently got an e-mail from Christian at SNOM saying that he's fixed GSM in the snom. Can anyone confirm that? Mark

Hello, I'm attempting to get Asterisk running for the first time in my company. As I've never used it before, I am creating a small testbed with which to learn Asterisk and get the kinks worked out before attempting to roll it out. I have * compiled and running, and built the sample config files as suggested by the Wiki. I got my Snom 190 configured to use DHCP, and have created an

Hello list, I'm having some troubles with DTMF tones. When pressing numbers on a Snom phone, the DTMF-signal takes too long. I have the following in sip.conf : dtmfmode = rfc2833 which works well for Grandstream, Yealink and Cisco phones. But not for Snom. Snom support tells me I should use SIP info. Is it possible to have something like this : dtmfmode = rfc2833, info ?? Because

Here is a part of a working sip.conf for Asterisk with SNOM190 Phones. Try using host=dynamic and have a closer look at the configuration in the snom 190. Also, try using dtmfmode=rfc2833 . [general] realm = hallinux2.gwsnettech.local port = 5060 bindaddr = 0.0.0.0 context = default disallow=all allow=alaw allow=ulaw allow=gsm register => 081503:xxxxxx@sipgate.de/081503 language=de tos=0x04

Hi list! I have an Asterisk server (1.2.14) connected to a E1 line via a TE410P, and some PAP2NA connected to it. The PAP2 DTMF configurations is set to INFO and Asterisk to INFO too. At first, is INFO method different from RFC2833?? Well, I have two problems. The first is that when I place a call to outside, via E1 trunk, sometimes I get some DTMF tones and I'm sure nobody hit any key. Seems

Hi, I'm trying to set up my SNOM 200 with extensions, with different ringtones - but it doesn't seem to work. I've defined two extensions for it in Asterisk and in the SNOM 200 configuration. In the SNOM home>settings>SIP>Lines config page, I have set the ringer for the first extension to "ringer1", and "ringer6" for the second. In

Hello list, I'm having DTMF-troubles with a Snom phone. I want to know if it's the Snom or Asterisk that makes the trouble. I'm playing a prompt, then make a choice for "2" : [Jan 5 17:06:38] VERBOSE[29172] file.c: [Jan 5 17:06:38] -- <SIP/test1-00000701> Playing '/var/lib/asterisk/sounds/vprompts/109001/prompt5040.slin' (language 'nl') [Jan

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031214/949c1368/attachment.htm -------------- next part -------------- Hello I have configured IP 7905G and SNOM 200 for Asterisk. Now problem is that I can call from IP 7905G to SNOM 200 but not the other way round. Instead I get "FORBIDDEN" Message on SNOM 200 LCD when ever I try

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031215/9327b656/attachment.htm -------------- next part -------------- Hello I have configured IP 7905G and SNOM 200 for Asterisk. Now problem is that I can call from IP 7905G to SNOM 200 but not the other way round. Instead I get "FORBIDDEN" Message on SNOM 200 LCD when ever I try

Dear all, I'm planning to buy some IP phones with GSM audio codec support in order to use with an Asterisk SIP server I have implemented and nowsuccessfully running with softphones like Eyebeam and Twinkle. A vendor offer to me the SNOM 300 IP phone, that support GSM 6.10 audio codec. I've looking for GSM 6.10 codec in the web but there is no helpful information. Just I enter the

Ok, not exactly an Asterisk problem, but... I picked up some SNOM 200 phones because SNOM's have been recommended for use with Asterisk and they have line buttons that can subscribe to presence. However, they don't appear to power up when connected to my Negear FS108P, which is an 802.3af Power-over-ethernet capable hub. I am pretty sure these are the SNOM 200b, in that the ethernet

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031221/41e5bcd1/attachment.htm -------------- next part -------------- Hello All, Whenever I try calling SNOM 200, I am getting "Everyone is Busy at this time" message though line is free. I tried with firmware image of 2.02t and 2.03b (this I received from SNOM customer support) but

With a recent update to Asterisk CVS, and versions 2.02r and t of the Snom 200 firmware, I'm getting the Snom phones stuck reporting "Busy.": -- Got SIP response 486 "Busy Here" back from 10.12.34.248 -- SIP/3064-b07d is busy They're on-hook, not doing anything. They are registered fine. I can pick them up and call out over Zap or IAX fine. I just