similar to: Zap Dial Problem ---- Erroneous dash

All: Yesterday I discovered something interesting. I dialed 1800ANCESTRY from the asterisk system I am testing and got the number doesn't exist message. I then dialed the same number from our old system and it went through. I realized that the "Y" in ancestry made the number too long, and went back to my dialplan. How do I ignore numbers that are too long? Obviously,

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

nobody any suggestions for me ? :-(( im running kernel 3.2. from backports. Greetz, Louis >-----Oorspronkelijk bericht----- >Van: belle at bazuin.nl [mailto:samba-bounces at lists.samba.org] >Namens L.P.H. van Belle >Verzonden: 2012-06-18 15:02 >Aan: samba at lists.samba.org >Onderwerp: [Samba] samba4 on debian squeeze > >hai, >? >Im trying to install

I have added the three lines to the sip.conf file based on the latest changes from broadvoice. I can receive incoming calls but cannot place any outgoing calls. The error I get is: *CLI> -- Registered to '69.73.19.178', who sees us as IPADDRESS:4569 -- Attempting call on SIP/Broadvoice/5068012 for application Playback(demo-congrats) (Retry 1) Mar 8 08:35:21 NOTICE[29290]:

Hi, I am getting this message on the * console on my first pri span. Pri show span show it is down, and I can't make any calls from the span. Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27

here is what I have: exten => _9XXXXXXX,1,Set(l_HomeAreaCode=381) exten => _9XXXXXXX,n,Set(dialnumber=${l_HomeAreaCode}${EXTEN:-1}) exten => _9XXXXXXX,n,Dial(SIP/SIP-Provider/${dialnumber},80) not having success; "Got SIP reponse 503" Service Unavailable" On 04/27/2015 02:19 PM, Bryant Zimmerman wrote: > Motty > Yes > From your dial plan accept 9 + 7 digits

Hi, I have a basic dial plan question; Here is the scenario. Call comes through IAX and my * authenticate, then collect the digits and dials out, simple :). Here is the dial plan; [did-in] ;for did callers exten => 866219xxxx,1,Ringing exten => 866219xxxx,2,Wait,4 exten => 866219xxxx,3,Answer exten => 866219xxxx,4,Authenticate(/etc/asterisk/authenticate.txt|a) exten =>

Hi, I'm using the new SipAddHeader application on Asterisk 1.2.1, here's a snip of my extensions: exten => _9XXXXXXX,1,SipAddHeader(P-Asserted-Identity: <sip:${CALLERIDNUM} exten => _9XXXXXXX,2,SipAddHeader(P-Asserted-Identity: tel:${CALLERIDNUM}) exten => _9XXXXXXX,3,Dial(SIP/${EXTEN}@${SIPTRUNK},,tT) exten => _9XXXXXXX,4,Congestion The problems is that Asterisk

forgot to mentioned I am running Asterisk 1.8.22.0 on CentOS. Thanks, On 04/27/2015 02:38 PM, Motty Cruz wrote: > here is what I have: > > exten => _9XXXXXXX,1,Set(l_HomeAreaCode=381) > > exten => _9XXXXXXX,n,Set(dialnumber=${l_HomeAreaCode}${EXTEN:-1}) > > exten => _9XXXXXXX,n,Dial(SIP/SIP-Provider/${dialnumber},80) > > not having success; > >

Hi I want to use Prefix app in extensions but get this error: WARNING[9255] pbx.c: No application 'Prefix' for extension ... I am just want to do somethig like this: exten => _9XXXXXXX,1,ANSWER() exten => _9XXXXXXX,2,Wait(1) exten => _9XXXXXXX,3,Prefix(511) exten => _5119XXXXXXX,4,DeadAGI(a2billtest.php|1) exten => _5119XXXXXXX,5,Hangup() Please someone tell me how to

I cant seem to get outgoing calls to be placed properly .. No matter what I try I get an error from the PSTN company saying that the "call can not be completed as dialed" or "you need to dial a one..." The asterisk debugging seems to show the correct number being dialed out of the zap interface... the "9" is being stripped and there is a "1" where it is

I am trying to test out my PRI configuration on a server by conection another asterisk server to it. I have the T-1 cards up and both set to bchan=1-23 and dchan=24 in zaptel.conf I am getting lost on the signalling in zapata.conf. using pri_cpe makes sense for my target box, but I am getting the following errors on my source box if I use pri_net or pri_cpe signalling. May 31 17:15:06

I'm trying to setup a couple of Cisco 7960's in asterisk. I have asterisk working fine for sip clients, and can call the 7960's just fine, but I can't seem to dial out on them. As soon as I enter the first digit, the phone attempts to dial it without waiting for the rest. I've changed timeout settings, etc but can't seem to get it to work. Any ideas? Asterisk

Greetings, If you have an account on issues.asterisk.org and just received an email about having an account created on a JIRA server, please ignore and accept our apologies for the accidental message. We were doing some test migrations of data from issues.asterisk.org into a newer issue tracking system and forgot to disable email first. Thanks, -- Russell Bryant Digium, Inc. | Engineering

https://bugzilla.netfilter.org/cgi-bin/bugzilla/show_bug.cgi?id=56 Summary: super-long erroneous timeouts in conntrack table (semantics of list_del() change) Product: netfilter/iptables Version: linux-2.4.x Platform: other URL: http://lists.netfilter.org/pipermail/netfilter-

Talking about openssh-3.2.2p1 The configure script erroneously reporting the md5-password status. The script, when activated with "--with-md5-passwords" correctly sets the config.h but reporting "MD5 password support: no" Seems that is due to a bug in configure.ac, line 2026 Kind regards, Kagan Kongar

Hi, Running ./configure with wine-cvs on a RedHat 7.1, i get the following message : *** Note: Your system appears to have the FreeType 2 runtime libraries *** installed, but 'freetype-config' is not in your PATH. Install the *** freetype-devel package (or its equivalent on your distribution) to *** enable Wine to use TrueType fonts. though freetype is in $PATH and has been found by

HI All, Keep getting the following in the messages file: Feb 28 21:24:43 hp kernel: ACPI: Unable to turn cooling device [f7d82dec] 'on' Feb 28 21:25:13 hp last message repeated 5 times Have hordes of these. All fans are working fine afaikt. Any idea how to make the beast stop reporting these messages? I am running kernel 2.6.18-53.1.13.el5 #1 SMP. Thanks in advance, Phil

I have a small, aircooled pc server, which is running fine, but the log gets filled with a series of messages saying the package, and each of 8 cpus is throttled because of thermal issues. Then, within the same second according to the timestamps, it reports everything is OK and throttling is off. This happens once every minute. In reality, when I try performance tests, I believe the processor

Aug 29 22:51:27 server1 dovecot: imap-login: Aborted login (no auth attempts): rip=(obfuscated), lip=173.50.101.12, TLS Aug 29 22:51:27 server1 dovecot: imap-login: Login: user=........... before most every successful login, the same second of time, dovecot has the above message. This is not a huge problem but our firewall is looking for aborted login attempts, for imap/pop3 (relevant to