nobody any suggestions for me ? :-(( im running kernel 3.2. from backports. Greetz, Louis>-----Oorspronkelijk bericht----- >Van: belle at bazuin.nl [mailto:samba-bounces at lists.samba.org] >Namens L.P.H. van Belle >Verzonden: 2012-06-18 15:02 >Aan: samba at lists.samba.org >Onderwerp: [Samba] samba4 on debian squeeze > >hai, >? >Im trying to install samba4 on my debian squeeze server. >? >all needed files are from debian unstable. >? >When i install samba4? ( apt-get install -t unstable samba4 ) >which is beta1 is in debian unstable. >at the end im getting the following error.. >? >get_nt_acl_no_snum: fset_nt_acl returned zero. >ProvisioningError: Your filesystem or build does not support >posix ACLs, s3fs is unworkable in this mode >dpkg: error processing samba4 (--configure): >?subprocess installed post-installation script returned error >exit status 1 >configured to not write apport reports >????????????????????????????????????? Errors were encountered >while processing: >?samba4 >E: Sub-process /usr/bin/dpkg returned an error code (1) > >? >but >? >cat /boot/config-3.2.0-0.bpo.2-amd64 |egrep "EXT4|EXT3"|egrep >"ACL|ATTR|SECURITY" >CONFIG_EXT3_FS_XATTR=y >CONFIG_EXT3_FS_POSIX_ACL=y >CONFIG_EXT3_FS_SECURITY=y >CONFIG_EXT4_FS_XATTR=y >CONFIG_EXT4_FS_POSIX_ACL=y >CONFIG_EXT4_FS_SECURITY=y > >? >?cat /etc/fstab ># <file system> <mount point>?? <type>? <options>?????? <dump>? <pass> >proc??????????? /proc?????????? proc??? defaults??????? 0?????? 0 >UUID=5bced605-b939-478b-acd8-2ac65c2b9983 /?????????????? ext4? >?? acl,user_xattr,errors=remount-ro 0?????? 1 >UUID=8fe1f168-1b1f-4997-b21d-ed47c846875b /boot?????????? ext4? >?? defaults??????? 0?????? 2 >UUID=2ff0a913-4546-46fa-9cfa-3c60d47d9f0e /home?????????? ext4? >?? acl,user_xattr?????? 0?????? 2 >UUID=cc5bc5c6-4419-4796-8cfb-4b842e60266e /home/samba???? ext4? >?? acl,user_xattr????? 0?????? 2 >UUID=cab73bbb-ac98-4975-8eb0-28b30dba58c3 /opt??????????? ext4? >?? defaults??????? 0?????? 2 >UUID=baf44883-e456-46a5-9c36-53c75a7b5477 /tmp??????????? ext4? >?? defaults??????? 0?????? 2 >UUID=1bf48043-1281-40e3-b2c9-0b9d42b6b384 /usr??????????? ext4? >?? defaults??????? 0?????? 2 >UUID=eed8dd47-494c-4f86-ad26-2fedfbca4c64 /var??????????? ext4? >?? defaults??????? 0?????? 2 >UUID=b48a10a3-331c-4a33-a3db-66cf1a06a98e /var/lib??????? ext4? >?? defaults??????? 0?????? 2 >UUID=7fca3635-b0e1-48b2-b0be-31723e5f2e7c /var/log??????? ext4? >?? defaults??????? 0?????? 2 >UUID=442eff03-2f25-4bb0-9abb-4f721f0c2572 none??????????? swap? >?? sw????????????? 0?????? 0 > >? >any suggestions ? >? >Louis >? >? >-- >To unsubscribe from this list go to the following URL and read the >instructions: https://lists.samba.org/mailman/options/samba > >
Hi, are dev package for acl, attr, ... installed ? ----------------------------------- St?phane PURNELLE Admin. Syst?mes et R?seaux Service Informatique Corman S.A. Tel : 00 32 (0)87/342467 samba-bounces at lists.samba.org wrote on 19/06/2012 10:16:20:> De : L.P.H. van Belle <belle at bazuin.nl> > A : samba at lists.samba.org <samba at lists.samba.org>, > Date : 19/06/2012 10:17 > Objet : [Samba] FW: samba4 on debian squeeze > Envoy? par : samba-bounces at lists.samba.org > > nobody any suggestions for me ? :-(( > im running kernel 3.2. from backports. > > Greetz, > > Louis > > > >-----Oorspronkelijk bericht----- > >Van: belle at bazuin.nl [mailto:samba-bounces at lists.samba.org] > >Namens L.P.H. van Belle > >Verzonden: 2012-06-18 15:02 > >Aan: samba at lists.samba.org > >Onderwerp: [Samba] samba4 on debian squeeze > > > >hai, > > > >Im trying to install samba4 on my debian squeeze server. > > > >all needed files are from debian unstable. > > > >When i install samba4 ( apt-get install -t unstable samba4 ) > >which is beta1 is in debian unstable. > >at the end im getting the following error.. > > > >get_nt_acl_no_snum: fset_nt_acl returned zero. > >ProvisioningError: Your filesystem or build does not support > >posix ACLs, s3fs is unworkable in this mode > >dpkg: error processing samba4 (--configure): > > subprocess installed post-installation script returned error > >exit status 1 > >configured to not write apport reports > > Errors were encountered > >while processing: > > samba4 > >E: Sub-process /usr/bin/dpkg returned an error code (1) > > > > > >but > > > >cat /boot/config-3.2.0-0.bpo.2-amd64 |egrep "EXT4|EXT3"|egrep > >"ACL|ATTR|SECURITY" > >CONFIG_EXT3_FS_XATTR=y > >CONFIG_EXT3_FS_POSIX_ACL=y > >CONFIG_EXT3_FS_SECURITY=y > >CONFIG_EXT4_FS_XATTR=y > >CONFIG_EXT4_FS_POSIX_ACL=y > >CONFIG_EXT4_FS_SECURITY=y > > > > > > cat /etc/fstab > ># <file system> <mount point> <type> <options> <dump> <pass> > >proc /proc proc defaults 0 0 > >UUID=5bced605-b939-478b-acd8-2ac65c2b9983 / ext4 > > acl,user_xattr,errors=remount-ro 0 1 > >UUID=8fe1f168-1b1f-4997-b21d-ed47c846875b /boot ext4 > > defaults 0 2 > >UUID=2ff0a913-4546-46fa-9cfa-3c60d47d9f0e /home ext4 > > acl,user_xattr 0 2 > >UUID=cc5bc5c6-4419-4796-8cfb-4b842e60266e /home/samba ext4 > > acl,user_xattr 0 2 > >UUID=cab73bbb-ac98-4975-8eb0-28b30dba58c3 /opt ext4 > > defaults 0 2 > >UUID=baf44883-e456-46a5-9c36-53c75a7b5477 /tmp ext4 > > defaults 0 2 > >UUID=1bf48043-1281-40e3-b2c9-0b9d42b6b384 /usr ext4 > > defaults 0 2 > >UUID=eed8dd47-494c-4f86-ad26-2fedfbca4c64 /var ext4 > > defaults 0 2 > >UUID=b48a10a3-331c-4a33-a3db-66cf1a06a98e /var/lib ext4 > > defaults 0 2 > >UUID=7fca3635-b0e1-48b2-b0be-31723e5f2e7c /var/log ext4 > > defaults 0 2 > >UUID=442eff03-2f25-4bb0-9abb-4f721f0c2572 none swap > > sw 0 0 > > > > > >any suggestions ? > > > >Louis > > > > > >-- > >To unsubscribe from this list go to the following URL and read the > >instructions: https://lists.samba.org/mailman/options/samba > > > > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba
On 19/06/12 09:16, L.P.H. van Belle wrote:> nobody any suggestions for me ? :-(( > im running kernel 3.2. from backports. > > Greetz, > > Louis > > >> -----Oorspronkelijk bericht----- >> Van: belle at bazuin.nl [mailto:samba-bounces at lists.samba.org] >> Namens L.P.H. van Belle >> Verzonden: 2012-06-18 15:02 >> Aan: samba at lists.samba.org >> Onderwerp: [Samba] samba4 on debian squeeze >> >> hai, >> >> Im trying to install samba4 on my debian squeeze server. >> >> all needed files are from debian unstable. >> >> When i install samba4 ( apt-get install -t unstable samba4 ) >> which is beta1 is in debian unstable. >> at the end im getting the following error.. >> >> get_nt_acl_no_snum: fset_nt_acl returned zero. >> ProvisioningError: Your filesystem or build does not support >> posix ACLs, s3fs is unworkable in this mode >> dpkg: error processing samba4 (--configure): >> subprocess installed post-installation script returned error >> exit status 1 >> configured to not write apport reports >> Errors were encountered >> while processing: >> samba4 >> E: Sub-process /usr/bin/dpkg returned an error code (1) >> >> >> but >> >> cat /boot/config-3.2.0-0.bpo.2-amd64 |egrep "EXT4|EXT3"|egrep >> "ACL|ATTR|SECURITY" >> CONFIG_EXT3_FS_XATTR=y >> CONFIG_EXT3_FS_POSIX_ACL=y >> CONFIG_EXT3_FS_SECURITY=y >> CONFIG_EXT4_FS_XATTR=y >> CONFIG_EXT4_FS_POSIX_ACL=y >> CONFIG_EXT4_FS_SECURITY=y >> >> >> cat /etc/fstab >> #<file system> <mount point> <type> <options> <dump> <pass> >> proc /proc proc defaults 0 0 >> UUID=5bced605-b939-478b-acd8-2ac65c2b9983 / ext4 >> acl,user_xattr,errors=remount-ro 0 1 >> UUID=8fe1f168-1b1f-4997-b21d-ed47c846875b /boot ext4 >> defaults 0 2 >> UUID=2ff0a913-4546-46fa-9cfa-3c60d47d9f0e /home ext4 >> acl,user_xattr 0 2 >> UUID=cc5bc5c6-4419-4796-8cfb-4b842e60266e /home/samba ext4 >> acl,user_xattr 0 2 >> UUID=cab73bbb-ac98-4975-8eb0-28b30dba58c3 /opt ext4 >> defaults 0 2 >> UUID=baf44883-e456-46a5-9c36-53c75a7b5477 /tmp ext4 >> defaults 0 2 >> UUID=1bf48043-1281-40e3-b2c9-0b9d42b6b384 /usr ext4 >> defaults 0 2 >> UUID=eed8dd47-494c-4f86-ad26-2fedfbca4c64 /var ext4 >> defaults 0 2 >> UUID=b48a10a3-331c-4a33-a3db-66cf1a06a98e /var/lib ext4 >> defaults 0 2 >> UUID=7fca3635-b0e1-48b2-b0be-31723e5f2e7c /var/log ext4 >> defaults 0 2 >> UUID=442eff03-2f25-4bb0-9abb-4f721f0c2572 none swap >> sw 0 0 >> >> >> any suggestions ? >> >> Louis >> >> >> -- >> To unsubscribe from this list go to the following URL and read the >> instructions: https://lists.samba.org/mailman/options/samba >> >> >Have you tried the ACL tests from here: https://wiki.samba.org/index.php/Samba4/HOWTO I am running Ubuntu 12.04 and only have to to install acl & attr, no need to touch /etc/fstab, as you can see from a copy of mine. # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=63c10807-be9a-4aed-bf2f-fa52e53fc162 / ext4 errors=remount-ro 0 1 # /home was on /dev/sda6 during installation UUID=3826e336-978b-43e6-b02f-83694b132ed3 /home ext4 defaults 0 2 # /mail was on /dev/sda7 during installation UUID=61616e32-13ec-46d1-9397-942d58edb02b /mail ext4 defaults 0 2 # /var was on /dev/sda5 during installation UUID=10990212-471e-45bb-8a9a-804694485665 /var ext4 defaults 0 2 # swap was on /dev/sda8 during installation UUID=6202eaad-8bfd-440c-adb9-9890f61227e0 none swap sw 0 0 I should also probably mention that I downloaded and compiled Samba4 from git, but I would not have thought that this would make any difference to ACL. Rowland -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
hai, and yes, dev are installed by command: apt-get build-dep -t unstable samba4 samba4 with: apt-get install -t unstable samba4 dpkg -l | egrep "acl|attr" ii acl 2.2.51-8 Access control list utilities ii attr 1:2.4.46-8 Utilities for manipulating filesystem extended attributes ii libacl1:amd64 2.2.51-8 Access control list shared library ii libacl1-dev 2.2.51-8 Access control list static libraries and headers ii libattr1:amd64 1:2.4.46-8 Extended attribute shared library ii libattr1-dev:amd64 1:2.4.46-8 Extended attribute static libraries and headers Louis>-----Oorspronkelijk bericht----- >Van: stephane.purnelle at corman.be >[mailto:samba-bounces at lists.samba.org] Namens St?phane PURNELLE >Verzonden: 2012-06-19 10:22 >Aan: samba at lists.samba.org >Onderwerp: Re: [Samba] FW: samba4 on debian squeeze > >Hi, > >are dev package for acl, attr, ... installed ? > > > > >----------------------------------- >St?phane PURNELLE Admin. Syst?mes et R?seaux >Service Informatique Corman S.A. Tel : 00 32 >(0)87/342467 > >samba-bounces at lists.samba.org wrote on 19/06/2012 10:16:20: > >> De : L.P.H. van Belle <belle at bazuin.nl> >> A : samba at lists.samba.org <samba at lists.samba.org>, >> Date : 19/06/2012 10:17 >> Objet : [Samba] FW: samba4 on debian squeeze >> Envoy? par : samba-bounces at lists.samba.org >> >> nobody any suggestions for me ? :-(( >> im running kernel 3.2. from backports. >> >> Greetz, >> >> Louis >> >> >> >-----Oorspronkelijk bericht----- >> >Van: belle at bazuin.nl [mailto:samba-bounces at lists.samba.org] >> >Namens L.P.H. van Belle >> >Verzonden: 2012-06-18 15:02 >> >Aan: samba at lists.samba.org >> >Onderwerp: [Samba] samba4 on debian squeeze >> > >> >hai, >> > >> >Im trying to install samba4 on my debian squeeze server. >> > >> >all needed files are from debian unstable. >> > >> >When i install samba4 ( apt-get install -t unstable samba4 ) >> >which is beta1 is in debian unstable. >> >at the end im getting the following error.. >> > >> >get_nt_acl_no_snum: fset_nt_acl returned zero. >> >ProvisioningError: Your filesystem or build does not support >> >posix ACLs, s3fs is unworkable in this mode >> >dpkg: error processing samba4 (--configure): >> > subprocess installed post-installation script returned error >> >exit status 1 >> >configured to not write apport reports >> > Errors were encountered >> >while processing: >> > samba4 >> >E: Sub-process /usr/bin/dpkg returned an error code (1) >> > >> > >> >but >> > >> >cat /boot/config-3.2.0-0.bpo.2-amd64 |egrep "EXT4|EXT3"|egrep >> >"ACL|ATTR|SECURITY" >> >CONFIG_EXT3_FS_XATTR=y >> >CONFIG_EXT3_FS_POSIX_ACL=y >> >CONFIG_EXT3_FS_SECURITY=y >> >CONFIG_EXT4_FS_XATTR=y >> >CONFIG_EXT4_FS_POSIX_ACL=y >> >CONFIG_EXT4_FS_SECURITY=y >> > >> > >> > cat /etc/fstab >> ># <file system> <mount point> <type> <options> ><dump> <pass> >> >proc /proc proc defaults 0 0 >> >UUID=5bced605-b939-478b-acd8-2ac65c2b9983 / ext4 >> > acl,user_xattr,errors=remount-ro 0 1 >> >UUID=8fe1f168-1b1f-4997-b21d-ed47c846875b /boot ext4 >> > defaults 0 2 >> >UUID=2ff0a913-4546-46fa-9cfa-3c60d47d9f0e /home ext4 >> > acl,user_xattr 0 2 >> >UUID=cc5bc5c6-4419-4796-8cfb-4b842e60266e /home/samba ext4 >> > acl,user_xattr 0 2 >> >UUID=cab73bbb-ac98-4975-8eb0-28b30dba58c3 /opt ext4 >> > defaults 0 2 >> >UUID=baf44883-e456-46a5-9c36-53c75a7b5477 /tmp ext4 >> > defaults 0 2 >> >UUID=1bf48043-1281-40e3-b2c9-0b9d42b6b384 /usr ext4 >> > defaults 0 2 >> >UUID=eed8dd47-494c-4f86-ad26-2fedfbca4c64 /var ext4 >> > defaults 0 2 >> >UUID=b48a10a3-331c-4a33-a3db-66cf1a06a98e /var/lib ext4 >> > defaults 0 2 >> >UUID=7fca3635-b0e1-48b2-b0be-31723e5f2e7c /var/log ext4 >> > defaults 0 2 >> >UUID=442eff03-2f25-4bb0-9abb-4f721f0c2572 none swap >> > sw 0 0 >> > >> > >> >any suggestions ? >> > >> >Louis >> > >> > >> >-- >> >To unsubscribe from this list go to the following URL and read the >> >instructions: https://lists.samba.org/mailman/options/samba >> > >> > >> >> >> -- >> To unsubscribe from this list go to the following URL and read the >> instructions: https://lists.samba.org/mailman/options/samba >-- >To unsubscribe from this list go to the following URL and read the >instructions: https://lists.samba.org/mailman/options/samba > >
ok tested the git build, this on works. i'll go report this to the debian samba4 maintainer. thanx to thinking with me.. Louis>-----Oorspronkelijk bericht----- >Van: rpenny at f2s.com [mailto:samba-bounces at lists.samba.org] >Namens Rowland Penny >Verzonden: 2012-06-19 11:15 >Aan: samba at lists.samba.org >Onderwerp: Re: [Samba] FW: samba4 on debian squeeze > >On 19/06/12 09:16, L.P.H. van Belle wrote: >> nobody any suggestions for me ? :-(( >> im running kernel 3.2. from backports. >> >> Greetz, >> >> Louis >> >> >>> -----Oorspronkelijk bericht----- >>> Van: belle at bazuin.nl [mailto:samba-bounces at lists.samba.org] >>> Namens L.P.H. van Belle >>> Verzonden: 2012-06-18 15:02 >>> Aan: samba at lists.samba.org >>> Onderwerp: [Samba] samba4 on debian squeeze >>> >>> hai, >>> >>> Im trying to install samba4 on my debian squeeze server. >>> >>> all needed files are from debian unstable. >>> >>> When i install samba4 ( apt-get install -t unstable samba4 ) >>> which is beta1 is in debian unstable. >>> at the end im getting the following error.. >>> >>> get_nt_acl_no_snum: fset_nt_acl returned zero. >>> ProvisioningError: Your filesystem or build does not support >>> posix ACLs, s3fs is unworkable in this mode >>> dpkg: error processing samba4 (--configure): >>> subprocess installed post-installation script returned error >>> exit status 1 >>> configured to not write apport reports >>> Errors were encountered >>> while processing: >>> samba4 >>> E: Sub-process /usr/bin/dpkg returned an error code (1) >>> >>> >>> but >>> >>> cat /boot/config-3.2.0-0.bpo.2-amd64 |egrep "EXT4|EXT3"|egrep >>> "ACL|ATTR|SECURITY" >>> CONFIG_EXT3_FS_XATTR=y >>> CONFIG_EXT3_FS_POSIX_ACL=y >>> CONFIG_EXT3_FS_SECURITY=y >>> CONFIG_EXT4_FS_XATTR=y >>> CONFIG_EXT4_FS_POSIX_ACL=y >>> CONFIG_EXT4_FS_SECURITY=y >>> >>> >>> cat /etc/fstab >>> #<file system> <mount point> <type> <options> ><dump> <pass> >>> proc /proc proc defaults 0 0 >>> UUID=5bced605-b939-478b-acd8-2ac65c2b9983 / ext4 >>> acl,user_xattr,errors=remount-ro 0 1 >>> UUID=8fe1f168-1b1f-4997-b21d-ed47c846875b /boot ext4 >>> defaults 0 2 >>> UUID=2ff0a913-4546-46fa-9cfa-3c60d47d9f0e /home ext4 >>> acl,user_xattr 0 2 >>> UUID=cc5bc5c6-4419-4796-8cfb-4b842e60266e /home/samba ext4 >>> acl,user_xattr 0 2 >>> UUID=cab73bbb-ac98-4975-8eb0-28b30dba58c3 /opt ext4 >>> defaults 0 2 >>> UUID=baf44883-e456-46a5-9c36-53c75a7b5477 /tmp ext4 >>> defaults 0 2 >>> UUID=1bf48043-1281-40e3-b2c9-0b9d42b6b384 /usr ext4 >>> defaults 0 2 >>> UUID=eed8dd47-494c-4f86-ad26-2fedfbca4c64 /var ext4 >>> defaults 0 2 >>> UUID=b48a10a3-331c-4a33-a3db-66cf1a06a98e /var/lib ext4 >>> defaults 0 2 >>> UUID=7fca3635-b0e1-48b2-b0be-31723e5f2e7c /var/log ext4 >>> defaults 0 2 >>> UUID=442eff03-2f25-4bb0-9abb-4f721f0c2572 none swap >>> sw 0 0 >>> >>> >>> any suggestions ? >>> >>> Louis >>> >>> >>> -- >>> To unsubscribe from this list go to the following URL and read the >>> instructions: https://lists.samba.org/mailman/options/samba >>> >>> >> > >Have you tried the ACL tests from here: >https://wiki.samba.org/index.php/Samba4/HOWTO >I am running Ubuntu 12.04 and only have to to install acl & attr, no >need to touch /etc/fstab, as you can see from a copy of mine. > ># /etc/fstab: static file system information. ># ># Use 'blkid' to print the universally unique identifier for a ># device; this may be used with UUID= as a more robust way to >name devices ># that works even if disks are added and removed. See fstab(5). ># ># <file system> <mount point> <type> <options> <dump> <pass> >proc /proc proc nodev,noexec,nosuid 0 0 ># / was on /dev/sda1 during installation >UUID=63c10807-be9a-4aed-bf2f-fa52e53fc162 / ext4 >errors=remount-ro 0 1 ># /home was on /dev/sda6 during installation >UUID=3826e336-978b-43e6-b02f-83694b132ed3 /home ext4 >defaults 0 2 ># /mail was on /dev/sda7 during installation >UUID=61616e32-13ec-46d1-9397-942d58edb02b /mail ext4 >defaults 0 2 ># /var was on /dev/sda5 during installation >UUID=10990212-471e-45bb-8a9a-804694485665 /var ext4 >defaults 0 2 ># swap was on /dev/sda8 during installation >UUID=6202eaad-8bfd-440c-adb9-9890f61227e0 none swap >sw 0 0 > >I should also probably mention that I downloaded and compiled Samba4 >from git, but I would not have thought that this would make any >difference to ACL. > >Rowland > > > > >-- >This message has been scanned for viruses and >dangerous content by MailScanner, and is >believed to be clean. > >-- >To unsubscribe from this list go to the following URL and read the >instructions: https://lists.samba.org/mailman/options/samba > >