similar to: IAX2 hangup on transfer

Dear Sirs, Anybody ever tried running SIP up against Voicepulse? On their http://connect.voicepulse.com they claim they support both SIP and IAX, but I can't seem to get SIP running. I have as mentioned before on this list - huge problems getting any timing devices running on some of my machines, so IAX is not really an option right now. If I try I get a "Service Unavailable"

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).

Hi Everybody I've got a weird problem. I am running one Asterisk system on a dual processor box. This box mostly do VoIP only but it has a Fritz PCI ISDN card installed with latest drivers. Dialing out through the ISDN cards from an internal Snom phone works fine and so does dialing in. Except - if I load the ztdummy module (for IAX channels) the capi drivers starts acting up. It is hard

Hi Everybody Any significant changes to CVS HEAD over the last couple of days. I've got two asterisk boxes - both on public IP but one is dynamic. The one on dynamic IP registers at the other one - that part is fine. Calls going from the one with dynamic to the static one goes fine. Call the other way results now in: Failed to authenticate user "1101"

Hi Chris, I know this is quite an old email, but I was browsing through the archive :) I am currently working on "embedding" asterisk in one of Allwell's STB's. The idea is more or less exactly like yours. The STB will be solid-state and contain OS, Asterisk, Basic configuration and voice files on a flash disk. It will boot up and get a network share via DHCP. This network

Hi Everybody, Got a weird problem here I think. Got a setup with an asterisk (current from cvs as of a few hours ago) in a box with an el-cheapo ISDN BRI card connected to the PSTN network and two Snom phones internally (one Snom-100 and one Snom-200). Dialing between the snom phones or dialing out to PSTN from any of the snom phones works perfectly. But when I receive a call FROM the PSTN

Hi! I have some problems with the download of Asterisk-addons. I try to follow instructions that I found in http://www.voip-info.org/tiki-index.php?page=Asterisk%20cdr%20mysql , but nothing to do. This is my shell: [root@obelix root]# cd /usr/src [root@obelix src]# export CVSROOT=:pserver:anoncvs@cvs.digium.com:/usr/cvsroot [root@obelix src]# cvs login Logging in to

Does anybody have any experience with the ZyXEL Prestige 2000W? I am having problems with the line tear down when I call another extension. If nobody picks up at the other end when I hangup the 2000W, the other extension continues to ring. Is there any way to hangup a SIP call if there is no more traffic? Asterisk seems to think that there is still a connection open. This is pretty annoying

Hi Everybody, I've been asked to upgrade an old NT4 server with a new server running Debian/Samba. I've got no problem with migrating the old server, but I do have one "unknown". The company mail run on an Exchange server that is most likely part of the NT4 network. Has anybody tried this setup? I did look in documentation and google and found precious little - which to me

I have just moved a host from a network that supports static IPv4 and IPv6. The IPv4 addr is set in ifcfg-eth0, and the IPv6 via RA (I set the MAC so I get an IPv6 addr that I like). I just moved the host to a network that supports static IPv4, but only dymanic IPv6, so at this time (until I get static IPv6), I need to disable the global IPv6 addressing. So in the ifcfg-eth0 file I set:

Hi all, Merry X''mas first :-) I have "Product","Category","Subcategory" 3 Model, and when new "Product", I want to use "Dynamic Select Menus" just like Ryan mentioned in http://railscasts.com/episodes/88-dynamic-select-menus I have everything down. But when I visit the js file, I got following error Showing

>>>>> "JC" == Joshua Colp <jcolp at digium.com> writes: JC> This stems from PJSIP not being dynamic with transports (it JC> doesn't like its environment changed to that degree while JC> in use). I'm afraid if your IP changes you'd have to restart JC> Asterisk when you are using PJSIP. Wow. I say this having voted for pjsip over the listed

I have one of my asterisks off an xDSL modem with a dynamic IP address. The IP address keeps on changing so I am curious as to what other people are doing to work around this issue. I am contemplating to register for a dynamic DNS service but then my communications become dependent on the availability of this service. The "host=dynamic" for SIP seems interesting. Any suggestions?

hi, here is my configuration : I've got a NATed network through a linux box the icecast server is running on the router I'm running ices 2.0 beta 4 on my own box everything seems to work fine, BUT: - I don't appear on yp directories (which are of course commented out in the icecast config file) even with my public IP address or a dyndns domain - the stream lags on the internet.

Hi - I''ve been going through the LARTC how-to and have successfully used the sample scripts (and wondershaper) with my xDSL links. I''m now faced with the challenge of providing 8 users at work an effective remote access connection over a PSTN ppp connection. The critical traffic in this case relates to our stock enquiry application which is running over terminal services.

Hello Walter, On Sat, 13 May 2017 13:08:17 +0200 "Walter H." <Walter.H at mathemainzel.info> wrote: > On 13.05.2017 00:29, Robert Moskowitz wrote: > > I have been working, for the past few years, with armv7 SOCs and have > a number of servers working. > > > > Intel, etal are catching up with ARM and I have seen ones like: > > > >

Hi I used to have a xDSL with a Cisco 677 router setup that connected via PPPoE to my ISP. I now have a different ISP that uses a xDSL modem setup which means my shorewall firewall machine external interface hooks up til my ISP by directly by DHCP and gets a real internet IP while before with my router setup . My question is: With my Cisco router setup i could from my LAN access my outside IP

I have setup a Samba 3.024 server on Solaris. I have successfully enabled two-way trusts between my samba domain and my legacy PC Netlink domain. (PC Netlink is the solaris port of NT4 aka Advanced Server for Unix.) My Samba domain includes 2 Windows 2003 Servers (One is Windows 2003 SP1, the other is Windows 2003 R2 SP2.) The PCNL server supports Windows 2000 Servers and XP Pro clients.

Hi All, I am running asterisk 1.2. I have a softphone connecting from a coworkers home through their router using IAX2 through our router at the office. Both have port 4569 for TCP and UDP opened and forwarded to the right pc and server. I'm seeing Raw Hangup <person's IP address>, src=0. dst=10787 messages show up in the log like 10 every 5 seconds. We can still make calls and

hello, I did some web design quite a while ago and now i have some time to get back into it but i want it as fast as possible and what i''m really lacking is some good resource how to restart. it''s like that i need the general html design patterns plus css in an accesible way. then i want to go dymanic with ruby on rails. i couldn''t find any book that is not mainly