similar to: Install Question

Hi all i need urgent help our entire switchboard is down only 5 days after it came up. this is the second time this has happened and i am thinking that asterisk is not worth the trouble it gives. mostly it runs without hassle. but around 2 weeks ago during the test phase we rebooted the machine and did the normal modprobes and this error popped up. coming back to work after the weekend the

Hi! I have just bought the X100P and TDM400P cards to install on my computer to implement the PBX. I also downloaded the newest softwares asterisk_ver0.5.0, libpri_ver0.4.0, and zaptel_ver0.7.0) to install on my computer (Red Hat Linux 8.0). All packages are compiled well. When I use "modprobe" to load drivers (modprobe zaptel, modprobe wcfxo, modprobe wcfxs), the first two (zaptel,

I found similar posts regarding this error but none that answered my question. My zaptel.conf reads: fxsks=1-2 fxoks=3 loadzone=us defaultzone=us and /proc/interrupts: CPU0 0: 5542402 IO-APIC-edge timer 1: 2 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 3 IO-APIC-edge rtc 14: 72582 IO-APIC-edge

Hi list. I'm having the next problem. I have a * with 1 TDM400P (4 ports) and one X100P, with a working configuration. Today i add one more X100P card, and i change the config files as next: zapatel.conf: fxsks=1-2 fxoks=3-6 loadzone = us defaultzone=us zapata.conf ... context=bell

Group Following the information located on http://www.asterisk.org/index.php?menu=download I get the following error installing the zaptel Any help would be great!!! Thanks [root@VoIPGW zaptel]# make clean; make install rm -f torisatool makefw tor2fw.h rm -f zttool rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo rm -f *.ko *.mod.c .*o.cmd rm

Hi, I've seen some reports about ruuning Intel modem with 537 or MD3200 chipset running with Zaptel drivers as a FXO port. Did anybody managed to set up a PCI faxmodem based on Intel536ep chipset to work with * and Zaptel drivers? Modem seemd to work just fine with Linux, but the driver says no;) some more info: Linux 2.4.26 mazuchna:~# cat /proc/pci | grep 536 Communication

Hello Everyone, I just got my Dev Kit TDM today... :D I installed the X100P ok (wcfxo); however, when I tried to 'modprobe wcfxs' for the TDM400P(TDM10B), I got this error message: /lib/modules/2.4.19/misc/wcfxs.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.19/misc/wcfxs.o:

Thanks in advance root@asterisk01:~# modprobe wcfxo /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o

I have just a second case where after * had been up for a few weeks working perfectly, it suddenly stopped talking to all the extensions. The I4L was still working perfectly though... I tried to stop asterisk, rmmod the modules, and insmod, and re-start asterisk but it did this: Using /lib/modules/2.4.21-pre5/misc/zaptel.o Using /lib/modules/2.4.21-pre5/misc/wcfxo.o Using

Hi All I've bought a TDM400P and need some help with configuration. Can you tell me what to do ? I've tried to install and the message below has appeared: [root@voip asterisk]# modprobe zaptel [root@voip asterisk]# modprobe wcfxo /lib/modules/2.4.22-1.2115.nptl/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid

Hi, I got my TDM11B and am trying to get it to work on my PC. However, I'm having difficulty getting the wcfxs driver to load. I've Googled this problem, and while there are others who have ran into the same problem, none of the solutions work for me. I would very much appreciate it if you could suggest things I could try to resolve this problem. Details follow. The PC is somewhat

Ok, I have 2 PC's that are identical. I loaded Redhat9 on the first and Asterisk and installed a x100p card and it works fine. I ghost the first PC and install the ghost on the second PC. Everything comes up on the 2nd PC but I can't get it's x100p card to load. The systems sees the card, it's on interrupt 11. It shows up in /proc/pci and /etc/sysconfig/hwconf and lspci shows it

I have put a box together using 2 X100P and 2 TDM400 4port cards. Using the simple setup that Martin posted a few days ago, I have asterisk almost up and running. /etc/zaptel.conf fxsks=1-2 fxoks=3-10 loadzone=nz defaultzone=nz (I have added NZ tone information to zaptel and Asterisk - I'll submit a patch soon). /etc/asterisk/zapata.conf [channels] context=incoming signalling=fxs_ks

Hmm, I don't have /etc/modprobe.conf, and wctdm is giving me problems. Which device is it talking about? [root@asterix /]# modprobe wctdm /lib/modules/2.4.20-8/misc/wctdm.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg

Hi all, I've struggled for several days trying to get a Digium TDM04B 4-port wxfco card working on a Dell 1U PowerEdge 750 machine running Fedora Core 1. I finally got a call back from Digium who indicated that there is a fundamental conflict between the card and the PowerEdge having to do with PCI interrupts. Asterisk version is stable v1-0 12/29/04. The symptoms of the problem were as

I have * working on my Sony Vaio PCG-FX120 laptop. I am trying to get * to recognize my internal PCI Intel modem as an FXO port. I have modified wcfxo.c in order to identify the PCI modem properly. Based on output from dmesg, wcfxo didn't recognize the modem until I inserted the proper vendor and device IDs into wcfxo.c and re-compiled. Note that the error message from "modprobe

Sorry, but this may be a really dumb question. How do I load the zaptel modules wcfxo and wcfxs at boot time on my Debian Sarge system? The file zaptel.init used by the command "make config" appears to be designed for redhat type systems and does not work for me. I have tried reading the man pages for update-modules but I'm stupid and cannot figure it out. Thanks, Mike

Hi All, Googling X100P Clone I found several information about these cards and seems that some winmodem has the same chip used from the original X100P. Here below a list winmodem which should work as X100P clone: 1057 Motorola 5608 SM56 PCI Fax Voice Modem E159 Tiger Jet Network Inc 0001 Tiger 300/320 PCI interface I bought one "Trust 56k V92 PCI Internal Modem MD-1100" which has the

It's nice to be able to define the list of asterisk modules we want to load from the /etc/sysconfig/zaptel file rather than directly in /etc/init.d/zaptel. I'm using nufone and don't require anything but the ztdummy (is the rtc-based module better, anyone?), so that's what I've put here. These are based on zaptel-1.0-RC1. John --- zaptel-1.0/zaptel.init.ole

Hi, I recently purchased two X100Ps and a TMD40B. I have set everything up according to the instructions however I can't get asterisk to pick up an incoming call (It just keeps ringing). Also, when I pick up an internal extension I get dead air. I searched the mailing list for 3+ hours -- What am I missing? Thanks in advance for your help. Here are the installion steps that I used: