similar to: Multiple DDI & Hunting on Analog Lines ( UK)

Hi everyone, I want to get multiple DDI's and hunting across those DDI's in case one of the lines is busy using analog phone lines. The system is for a large house so I want 3 x PSTN lines. 3 x DDI's and the ability for those DDI's to be presented across all three PSTN lines. BT say you can't have more than one DDI number associated with a PSTN line and that you can't

Hello all, does anybody have experiences with DDI on ISDN BRI? I would like to order DDI with 10 or 100 numbers from telco company, and use DDI numbers for direct calling SIP/H323 clients. But I don't know if Asterisk supports it, in archive I found only one answer about it, and I'm not sure. I am going to use it with isdn4linux card. Maybe DDI is called differently in other countries,

Hi everyone I'm interested in using the Telappliant/voip-talk offering as an alternative to my DDI analog problem. (see [Asterisk-Users] Multiple DDI & Hunting on Analog Lines (UK) for details) Does anyone on the list have any recent comments on reliability etc? I would really appricated some positive and negative comments. Cheers Matt

Peter - 40 phones and only 3 PSTN trunks?. I would recommend at least 2 BRIs for this. If you have ISDN you can also get DDI to the extensions.I would strongly recommend abandoning the analogue PSTN lines and using ISDN. The setup pain you will go through will be significantly less, combined with better audio, more features (like DDI numbers!) and much more robust connections. You should look

I have * configured with 2 X100P cards (fxs_ks). The lines from the telco are 'analogue both way ddi trunks'. This means that every inbound call contains digits that represent an extension on the PBX. I can make outbound calls from * with no problem however I cannot receive inbound calls on these trunks. Some investigation has shown that when the line is idle there is 50 volts present and

*My apologies if this message is posted 3 times, I was trying to sent it to the list once before I am a list-member, the second time before I was approved. Can anyone point me to some resources on using hunting lines with Asterisk? Sales support of my telco have no idea what I am trying to do. They asked what pbx system I am using, I was like Aster... never mind =) I am trying to setup

Hi there Background: I want to add DDI and voicemail to users on an existing analogue pabx.. It does not support ISDN. I have 10 DDI numbers via IAX which I am having sent to my Asterisk box. I have 2 X100P cards connected to 2 analogue extension ports of my main legacy analogue pabx. I have set up voicemail for each of my DDI numbers, and when a call comes in for the person at pabx

I'm using a TE405p with all four spans enabled, two configured as pri_cpe and two as pri_net, the asterisk is sitting between our ISDN (UK BT EuroISDN30) and our phone system. We have 200 DDI numbers on the ISDN's and I need to give one of our clients dial-in access to be able to monitor calls we handle on their behalf. I've got ZapBarge working but I need to restrict the client

Hi all, Is there in * support for DDI (Direct dial-in)? I buy a AVM ISDN-Controller B1 & I want to use it in point-to-point mode on my ISDN BRI link with DDI preselection. That means, that I have phone number range from ATM, e.g. +421 2 xx xx xx yy where yy I can set-up on my PBX (*) xx - fixed numbers. I want various action for various yy, like (f.e.): 01 -> ring analog phone on TDM

hello, anyone has worknig ISDN hfc-pci card in DDI (DID) point2point mode? what kernel ? and second question mISDN driver .. anyone has working solution with mISDN and maybe fritz card? what you suggest for DDI -> point2point mode (card,kernel,chan_..., ...) ? thank you, Tomaz

If anyone can help me with this I'll be soooo grateful :) We have a isdn30 line, with a DDI range. We also have 2 business units that have separate 0870 numbers that are mapped onto 2 DDI numbers. I would like to be able to present these 0870 numbers from the business units so that the correct number is displayed on a callerid, or when 1471 is dialled. BT claim that I can only have a

Hi :) My employer is looking to move a call centre to a new office, and has been increasingly frustrated with their legacy PBX (call-logging licensing and hardware upgrade costs). So I've stepped forth as the Open Source Pedant and suggested Asterisk so we can do all our own CallerID / call logging / analyses, and make use of IP Phones / teleworking, etc. The problem begins in that I only

Hi all, I've been playing about with Asterisk for years now on and off, just SIP to SIP calls, using FWD and suchlike. I'm moving house at the beginning of September and have decided to build an Asterisk based system for my home office. I'm in the UK and wonder if anyone can give me advice on lines and hardware to use. Had planned to go with an ISDN2e line coupled with a BT

>> So it sounds like it should "just work". I'll let you know in a few >> weeks time :) > TDM400P to E1/T1 card faxing fails by design. The lack of > synchronisation between cards means it can *never* work with any > reliability. The hardware will not permit it. >> >> (And I know I've asked this before, but any recommendations for a >>

Hi Just moved offices in the UK and moved our Asterisk box from old one to new one. Using idefisk softphones, Junghanns quadbri card for ISDN 2e interfaces. At both offices we had one standard number and a DDI range, routed with Asterisk. We'd set up the configuration so each idefisk set its own caller ID which then got sent by the extensions.conf script. Worked fine at old place but in

Hi, Need to implement hunting (create a hunt group so my subscribers can have a single GSM number for access to me)of GSM SIMs on a GSM bank independent of the Telco for the SIMs. Anyone got an EXACT idea how to do this? Thanks, Latex. ____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football

Would be nice to do both (type 2 and 3 I believe in Oftel terms), but I'd accept just our DDI if that was all I could get. Steve -----Original Message----- From: Storer, Darren [mailto:starusers@comgate.tv] Sent: 01 July 2004 09:35 To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Providing Telewest in the UK with per extension outbound callerID Hi Steve,

I am going to try and use a passive AVM fritz BRI card for my * setup.. Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels.. According to the BT website in order to use the hunt grouping across

Hi all, I'm stuggling with how to present calleds to a specific DDI (DID) with Music on hold whilst the call is hunted around 3 phones, then if not answered within a certain period forwarded to voicemail. So far I've got the queue working and the voicemail but not both together. Ive had a look on the wiki and the archives but can't spot anything that might point me in the right

Hello- I have a system with one D410P and one B200P (both OpenVox). All is well with the D410P, inbound and outbound, and I can initiate calls on the B200P BRI span, but there may be something wrong with my inbound BRI setup: there is no indication of an inbound call when I dial in to it from the PSTN. When I run "pri intense debug" and make a call to the BRI span, I can see a