similar to: Re: Asterisk-Users digest, Vol 1 #3921 - 15 msgs

good tips ill try that out thanks ps is there a recommended runlevel or 2345 is ok? -----Original Message----- From: Lee Howard [mailto:faxguy@howardsilvan.com] Sent: Monday, January 09, 2006 1:59 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] OT: IAXModem in inittab causes modem to be unres ponsive, running from console it's OK Colin Anderson

I'm just wondering here, in our community... Why not HylaFax for Fax solutions? I'm not saying bad about the big efforts on app_tx and app_rx with spandsp. But as me and many other asterisk users, we find out that Hylafax+IAXModem+Asterisk is very reliable. And from what i've been testing and reading, Hylafax is an extremely powerful: "HylaFAX is an enterprise-class system for

faxguy, maybe you can tell me why As I've noted in previous posts I'm evaluating HylaFax with IAXModem. When I run iaxmodem and faxgetty through a console the modem works 100% I have yet to find a fax that it won't tie up with. When I run IAXmodem and faxgetty in initttab, the modem is extremely slow to respond and only actually does anything about half the time, the rest of the time

This is what you show CBeyond. You have some vouchers there from CBeyond that will allow me to get paid from them not you. Chuck Coleman President CCI Technologies/CC Call Center/CSI Technologies Director of Managed Services for Gurus2go Cell 510-439-6501 Confidential Email: This email and any files transmitted with it are confidential and intended solely for the use of the individual or

This really only seems practical in a corporate environment however, I would suggest decoupling the creation of faxable material from the act of transmitting it. First use CUPS/Samba to create a 'print to PDF' printer (http://www.google.ca/search?q=samba+pdf+printer) Second use an LDAP to look up to return the email address of the submitter of the job and send them the resulting PDF

Hello list. I've been running a Cisco VOIP WAN for the last two years using CallManager V3.2. The remote 1760 routers are set up as H323 gateways. I've got a VG200 that is my PSTN gateway with a full T1 voice trunk to the local CO. I'm also running Unity v3.x for voicemail. We are currently using two ATA186 devices that are using the G.711 codec to pass incoming calls on the T1

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk

hi list , is having problems when sending a fax with hylafax and a card sangoma A200D, when he sends it arrives to the destination but it paginates appears in white this is my log Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms, 20 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM WWW.SOFT-SWITCH.ORG spandsp/ Aug 20

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk and

Can anybody recommend a good web interface for asterisk that actually works. I am looking for a web interface that can show how many callers are on the phone, should be able to transfer the calls and disconnect. I have tried using the flash operator but has been unsuccessful in making it work. thanks -----Original Message----- From: asterisk-users-admin@lists.digium.com

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

you can do this with MeetMe, but you don't have to. you can also use Parking, which makes things a little simpler. in either case, the strategy is going to be something like: 1. Record the soundfile 2. Park the inbound caller 3. Use a .call file or the manager interface to initiate an outbound call to the mobile phone 4. play soundfile and prompt the mobile phone user to accept/reject the

You have the session target as the IP address of the router's own ethernet interface. You probably want that to be the address of the Asterisk server instead. I also highly recommend you use full duplex ethernet, as voice packets don't really like to be restransmitted when a collision happens. -d > Message: 10 > From: "Bartosz Jozwiak" <bartek@cq-link.sr> >

and receivefax seems to be working ok. The connect speed is low somewhere between 2400-9600 but it seems to be working. Actually I was able to receive international fax. Of course with some failures :-) If you want to use T38 in asterisk over ip with ata I didn't have too much luck with it. May be it would worked better on LAN. I switched to cisco or other hardware and it worked ok. Vladimir

Message: 5 To: asterisk-users@lists.digium.com From: Doug Meredith <doug.meredith@skyridge.com> Date: Wed, 21 Jan 2004 20:05:19 -0400 Organization: Skyridge Systems Inc. Subject: [Asterisk-Users] Re: What technology could my phone company be using? Reply-To: asterisk-users@lists.digium.com >>Mark Hazlewood <lists@idontknow.com> wrote: >>Sounds like Centrex services, we

Hi, I'm sending twice the same file using Hylafax's sendfax app. The first time I'm "dialing" a DID attached to the ReceiveFAX application. The second time I'm dialing an internal extension attached to the same ReceiveFAX application : 1. sendfax/hylafax/iaxmodem ----> asterisk ----> dadhi ----> dahdi ----> asterisk ----> spandsp 2.

Hi all, Can any one please help me in intergrating PHP/Mysql with my running asterisk server to configure IAX or SIP users? I will highly appreciate any help in this regard. Regards Nawaz. --- asterisk-users-request@lists.digium.com wrote: > Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, >

Hi, I've been struggling with this for a quite long time. Maybe I am not the first asterisk user with this problem, (I try to search on google, but I didn't find anything good). My point is: I try to set up * to work as a fax server. Each incoming fax (from PSTN) should be received on email. Luckily it works. I didn't notice any problem with receiving faxes on email, so rxfax works

I've a stock RH9 system with spandsp 0.18. Faxing out over a PRI to a USRobotics modem on a stock Suse9.3 system with hylafax fails with the following errors in the hylafax logs: Jun 30 19:28:53.23: [ 608]: RECV/CQ: Bad 1D pixel count, row 0, got 595, expected 1728 Jun 30 19:28:53.23: [ 608]: RECV/CQ: Bad 1D pixel count, row 1, got 595, expected 1728 Jun 30 19:28:53.23: [ 608]: RECV/CQ:

well, thank you to all with the propane... "user head space error" is a problem, but I can see past this level of ... how do you say, never mind. anyhow* Your wine is VERY old. !!Yes, got one, and will compile once I work out how to... you can get a newer version at http://www.winehq.com/download.shtml you can also get the latest version of the source and documentation at