similar to: Problem receiving a fax with RxFAX

Hi all, There is a test version for the next release of spandsp at ftp://ftp.opencall.org/pub/spandsp/spandsp-0.0.2pre2 Only use this if you wish to experiment. In general, using spandsp-0.0.1 is probably more stable right now. If you have had problems with Canon FAX machines not accepting FAXes from spandsp-0.0.1 you might like to try this version. I have had at least one report from

I followed the instructions at http://www.opencall.org/instructions.html and http://lists.digium.com/pipermail/asterisk-users/2003-October/025094.html I was able to compile spandsp (./configure ; make ; make install), "manually" patched asterisk apps/Makefile (/usr/src/asterisk/apps), as the supplied patch does not fit the actual CVS apps/Makefile After make clean ; make install, I

Hey All, I'm still (since April) having problems getting RxFax to work over an ISDN4Linux channel. Just wondering if anyone has had any luck getting it to work? I have done a CVS update today (about half hour ago) and made sure I have the latest version of spandsp according to Steve's website (spandsp-0.0.1k). When I was compiling asterisk, I got the following warnings:

what is g723? ive never seen that before... -- Executing Answer("Zap/1-1", "") in new stack -- Accepting call from '2819870065' to '2815692780' on channel 0/1, span 1 -- Executing Wait("Zap/1-1", "1") in new stack -- Executing SetVar("Zap/1-1", "FAXFILE=/var/spool/asterisk/fax/1105486770.492.tif") in new stack --

Hi, Anyone using my spandsp or unicall software please note that opencall.org is shifting to soft-switch.org. HP have a line of telephony products called Opencall, which were very obscure in 1999, when I registered opencall.org. A search for "opencall" on Google back then returned only references to theatrical agents. opencall.com and opencll.net were theatrical sites. Now a search

Hello, We use tiff version 3.5.7-2 and spandsp-0.0.2pre3 with asterisk version 1.0 on debian unstable. I have posted for our problem wtih fax. RxFax works and we receive faxes, but the tiff file is sometimes malformed although the fax seems to be received correctly. Our asterisk server receives calls and faxes from a mobile operator. We are connected to their Cisco router which connects to our

Anyone knows where can I find spandsp? Official site seems permanently down... TIA, Simone.

I'm trying to install the SPANDSP software into Asterisk to support incoming (mainly) Fax. I'm following the info in http://www.voip-info.org/wiki-Asterisk+Fax. I downloaded and installed the spandsp software from ftp://ftp.opencall.org/pub/spandsp/ and followed the directions in several documents listed on the on the Tiki page. I get down to patch < Makefile.patch that fails with

Hi all, I would like to announce the availability of an initial test version of a totally software FAX facility, suitable for use with Asterisk. This is a first public test release, so don't expect a solid polished product just yet. People have shown interest in what I am doing, and here is the evidence that it is not vapourware. If the notion of a software FAX machine is new to you,

Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many

Hi Last month, people reported a crash with Asterisk 1.2.13 and spandsp-0.0.3 when receiving a fax using fax detection. Today I've tried 1.2.14 with the latest spandsp 0.0.3pre27 and with the snapshots for app_rxfax.c and app_txfax.c. The problem still happens. Has anyone found how to resolve this issue? I tried emailing Steve Underwood (with crash backtrace) but he hasn't

I have no analog line interfaces on my asterisk system, but I do have two UK 0870 numbers routed to two separate VoIP accounts (one with FWD, one with gossiptel). Asterisk is configured to register with these accounts. I get voice calls through just fine this way. I thought I could get one of these 0870 numbers to route through to rxfax, thus allowing folks to fax me directly. I've set up

Hi all, After a long time having no time, I have finally done some fresh work on my software fax machine. I have replaced the original carrier tracking with something more robust. I have also added 4800, and 2400 bits per second modes, and cleaned up a few bugs in areas like superfine mode operation. I apologise for this update taking so long. At ftp://ftp.opencall.org/pub/spandsp you will

I have compiled Spandsp without any problems. I got no errors I have also done the patch without getting any error. I have tried pre4 and pre6 version with same problem. I got no errors with the ./configure make make install. After I add the directory for /var/local/lib into the /etc/ld.so.conf I have ran ldconfig. I am running asterisk as user asterisk on a RH 9 Linux distro. This system has

Hi Everyone... I am running Asterisk 1.2.22 on Debian "Etch". I installed it from sources. I have also installed tiff-v3.6.0, spandsp-0.0.3. and downloaded http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_rxfax.c http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_txfax.c and a Digium TDM card with 4 FXO ports When my dialplan

On the /proc/zaptel it was lost interrupts, you haven't got any so that's good! On opencall.org there's a known issues link and that mentions some fax machines that have issues, might be worth a quick check there. I can receive from our fax machine this end, if you'd like I'll send you a test fax if you send me your fax number, if you can receive from us and tpc then it's

Hi, I have installed the latest version of asterisk(1.4.0-beta3), and built app_rxfax/txfax. I'm using spandsp from here, http://www.soft-switch.org/downloads/snapshots/spandsp/spandsp-20061207.tar.gz Everything builds ok. I had to manually apply the patch from the site so configure would spot spandsp libraries. However, when I try dialing my virtual fax extension (either from a phone or

Hello, my configuration is the following: a TDM400P board with an fxs and fxo daughter boards on it. I thus connect a fax to my FXS port, after having verified that this port was correctly functioning. For this, I had tried before with a simple phone, and with some basic voicemail exten scripts. Here is my simple dialplan for my fax reception: exten => 300,1,Ringing() exten =>

>I don't see why rxfax would be less reliable than iaxmodem/hylafax as >it's using the same spandsp to receive fax. I will defer to Lee Howard on this but IIRC the big factor is ECM which is not supported in SpanDSP. And another difference is that it is *HylaFAX* that is recieving the fax itself rather than SpanDSP. IAXModem just uses some of SpanDSP's libraries.

A DID number was dedicated to receive fax, but i have the problem when getting fax call, which call will become a normal phone call and no fax was printed. When fax is detected, the fax extension is executed and dial the extension of the HT486 device (firmware 1.0.5.22). Somehow sending fax out working well. In the mailing lists, i notice some are using HT286 and it work. Could someone share