similar to: Losing my PRI Interface every 20-30 minutes???

Dear all, I have the following lines in my extentions.conf file; ;All US Calls exten => _9001XXXXXXXXXX,1,Dial(IAX2/dornoch:xxxx@10.xx.xx.xx/${EXTEN:1}@outbound) ;Dial 9 for outgoing numbers exten =>_9.,1,Dial(Zap/g1/${EXTEN:1}) ;include Brunswick switch => IAX2/dornoch:xxxx@xx.xx.xx.xx/sip What I'm trying to do is to send any calls starting with 9001 out through

Hi, After temporarily pulling the T1 cable out of our Asterisk box, we ended up getting a strange error messages even after the cable was plugged back in. [...] Dec 10 09:01:11 WARNING[1192437440]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 63 failed: Unknown error 500 Dec 10 09:01:21 WARNING[1192437440]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 63 failed: Unknown

Dear Group, I have just purchased two Linksys SPA941 and flashed these to the latest firmware. Everything works well except for the Hold button? Has anyone else experienced the same issue? What was the solution? Kind Regards Shad Mortazavi

Hello all, I got a problem at an asterisk server, with dropping calls, losing all channels and reaktivating all channels and beeing back up. This problem seems to occure randomly over the whole day, when it gots traffic on the card. After looking @ google I found several hints but none did work fine. To avoid problems with the phone line (german E1) I called the provider, he did a 45 min. route

Dear Group, Does any one have experience using SoundPoint(r) IP 300? I have one call center on Snom 200's I'm adding a second and was looking at the SoundPoint, but needed some input. Thanks Shad Mortazavi --------------------------------------------------- Nexus Technical Manager n|m Nexus Management Inc Sydney -------------- next part -------------- An HTML attachment was

Dear All, I'm running version 0.7.1 of Asterisk server for our global help desk. We have put together a comprehensive reporting package for static's from the CDR. I'm not able to calculate the time a call is in the queue before it goes to an agent? I would appreciate help with working this out. Warm Regards and Thanks Shad Mortazavi

Dear All, I have a requirement to 'originate' a number of calls to various external users from within a conference room, so that the end users does not pay for the call. I know that within Astman I can define an extension and then originate the call from that extension. Can I define a conference room (how would I configure that on astman? What channel would it use?) and then generate a

Dear All, I have been running a successful and very stable call center PBX based on 0.7.1 release. I need to be on this release because of a number of features that I have complied from 3rd party patches, for the call center. I will not be able to upgrade to release 1 until the patches catch up and I have done the required testing. The system was very stable until two days ago. The changes made

Dear Group, I'm working on a call recording solution and would like to have the ability to initiate a 3 way call based on an incoming call. One party will be an AGI that I have other will be an outbound call via a second T1 interface. Does anyone have a working configuration for an Asterisk initiated 3 way call? Thanks and Regards Shad Mortazavi

Hi, I'm installing E100P for isdn pri line. My configuration are like this. zaptel.conf ======================================= span=1,0,0,ccs,hdb3,crc4 loadzone = us defaultzone=us bchan=1-15 dchan=16 bchan=17-31 zapata.conf ================================================= [channels] context=default switchtype=euroisdn context=default signalling=pri_net usecallerid=yes

Dear All, I have the following setup. Quad T1's<->Asterisk (PBX)<->(LAN<->DMZ)<->SER<->(Firewall)<->(Internet) | Local US Help Desk (Snom 200') This setup works well. I can pass calls from over the internet to the Asterisk PBX via SER using X-Ten Lit. I have a couple of questions; 1. How do I

Dear Group, I have been successful in setting up the Agents, queues and getting agents to log in. Is there a way that I could configure the system so that the agent is called back. i.e. the agent logs into the system, a call is destined for them and their phone rings. If some one has this setup I would be very interested in hearing from them. Warm Regards and Thanks --------------- Shad

Dear All, I have a number of call queues defined in Asterisk. I would like to program a system attendant that tells people; 1. Every 60 seconds 'Your call will be answered as soon as possible' 2. Tell the user how many calls are on the queue. I would then like them put back on hold music. Does someone have a configuration for this or something similar? Your help would be greatly

Dear Group, At the moment I use SJPhone as my soft phone with Asterisk. I prefer the look and feel of the x-ten lite. However, when ever I use my x-ten lite I get a lot of breakup in my communication. E.g. I will play some hold music, and every 5-6 seconds I drop some packets. I don't have the same issue with SJPhone. I'm sure this is a configuration issues, but I can work

Dear Group, I have my Asterisk box working with a Mediatrix 1204. I have 2 questions; 1) I do not seem to get a Call ID on the call coming via the Mediatrix 1204. I was wondering if anyone had this configured and if they could share this with me? 2) How do you route a call based on caller ID on Asterisk. At the moment I'm routing calls via DNIS. Thanks and Regards Shad Mortazavi

Dear Asterisk Group. I have two Asterisk servers serving two data/help desk centers, both centers have a near identical setup. However, when connected to one of my data centers, I call a user, I can see on the CLI that the phone is ringing, but I hear no ringing on my SIP soft phone? Has anyone had a similar scenario? How as it resolved. Warm Regards Shad Mortazavi

Dear All, I seem to have stumbled across an AGI problem; I have written an AGI Script (bottom of this email); The script does the following; Makes a CDR entry when called Records the call Updates the CDR Finds a corresponding DNIS from the SMDR table (captured via a serial port logger) Matches up the record and updates the CDR. The script works perfectly in my test lab and has been doing so

Hello, I'm trying to get a Wildcard T100P working with Asterisk and so far I haven't had any luck. No problems with the card itself from what I can see and the telco says that the problem is on our end (don't they always?). A small sample of what asterisk spews out on the console: Jan 13 15:45:32 WARNING[180236]: chan_zap.c:5834 zt_pri_error: PRI: Read on 43 failed: Unknown

I have to agree. A large number of people are looking for this feature. I have written a web script that can show Agent logged into the system. I think integration/gateway between Asterisk and Jabber would be a amazingly wonderful product. There is always MSN. Shad Mortazavi --------------------------------------------------- Nexus Technical Manager n|m Nexus Management Inc Netural Bay

Hi I have recently upgraded my Asterisk system (from 1.2 to 1.4) and I have started to notice the following messages when I recieve a call on my Zap channel :- [Mar 11 09:20:17] WARNING[4294]: chan_zap.c:8851 zt_pri_error: 1 copying 5 bytes LLC I have a single PRI ISDN 30 link to a Siemens Realitis DX. Here is my zapata.conf :- [channels] echocancel=no echocancelwhenbridged=no rxgain=-5.0