similar to: problems with analog interface to PBX

I have a couple of X100P's in my system and while on calls they just randomly hang up for no reason. I have tried messing with the busydetect and callprogress setting them to yes and no same and still random hangups. Is there another setting I should be looking at? My zap config looks like. context = inbound-work include => extensions signalling

Hi List, I've got * randomly hanging up on inbound or outbound calls on zap channels. I use a Digitnetworks X100P clone card. Any idea of what might be happening? Cheers, Jean-Michel.

FYI to anyone else who may be experiencing random hangups; I removed the busydetect=yes lines from the conf files on my asterisk servers, and haven't had a hangup since. I had done that once before and it didn't seem to have much of an effect, so I'm not breaking out the champagne yet. But so far over dozens of calls both made and received since I took that line out, I

Hello, I've commited the new busydetect routine to CVS. You need to cvs update asterisk of course and then choose it in asterisk/Makefile and recompile asterisk. All you X100P users that had the problems with false hangups or the card not being able to detect the busy tone please check that. In the asterisk/Makefile you need to find a line BUSYDETECT = and uncomment what you want/ comment

Guys, this is weird.. Today I started having some problems with calls been dropped. Im suing X100p cards (clones) and I have this setting on my zatala fle: [channels] language=sp signalling=fxs_ks usecallerid=yes cidsignalling=bell cidstart=ring hidecallerid=no callwaiting=yes usecallingpres=yes ;sendcalleridafter=1 callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes

Hi all, I have an existing panasonic analog pbx in use and a asterisk server with digium tdm400p(2 fxs and 2 fxo). channel 1 -> fxs -> telephone channel 2 -> fxs -> telephone channel 3 -> fxo -> extension 15 at panasonic pbx channel 4 -> fxo -> phone line from telco We call in to fxo (channel 4) and enter the ivr which prompt us to enter the extension number. After

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, As I understand it, Asterisk currently uses the timestamps in incoming RTP packets to build outgoing voice frames. Is this true? Would it be possible for me to use i.e. zaprtc as a timing source for the outgoing stream? I.e. in a setup like below I'd like to use zaprtc timing on Ast1 because I don't trust the timestamps coming from

I have Asterisk setup in a SOHO environment. I have 2 X100P cards at Zap/1 and Zap/2. I have 1 TDM400P card with Zap/3 - Zap/5. I have subscribed to callwaiting, callerid and calleridcallwaiting from Qwest on the 2 PSTN lines - Zap/1 and Zap/2. My problem is when I'm in an active call to the outside thru Zap/1 or Zap/2, I can't pickup the incoming callwaiting call. I can see the

Hi, I had been using 4 X100P cards in my Asterisk box, but 2 of them were sharing an interrupt. Therefore, periodically I would hear beeps and clicks that I had assumed were a result of this. So, I ordered a TDM400P with 4 FXO modules and installed it in the box last night. Today, we've had nothing but problems with it dropping calls. I installed the latest CVS of everything, and we've

i am have x100P clone, and install asterisk 1.4 and out call normaly and hangup in xlite to zap but call to asterisk for zap channel nop pass to xlite and the caller hangup the asterisk not detect. what is the problem ??? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070720/39d4c1e8/attachment.htm

Ok, is it me or do some of the commands just not work properly? I asked for mailboxstatus and got: Response: Success Message: Mailbox Status Mailbox: 1000 Waiting: 0 which is all well and good, except of course I have 2 messages waiting... which kinda means it only works, if you have 0 messages... (using voicemail not voicemail2) Andy

Dear List members, After succesfully installing the * on a couple of systems, and putting them on test, I observed that there is an intermittent call drop on PSTN line. The systems are - Dell Optiplex P3/500MHz/128MB - Built-in ethernet - 1 X100P (Motorolla chip) card on PCI - 10G HDD etc. - Asterisk April 17 CVS. - 2 Mediatrix FXS ATA (4 phones) - 2 Grandstream phones. - sip.conf, zaptel.comnf

Hi Guys, I am getting a complain that call on analogue lines (Sangoam A400D) drops all of a sudden. Here is what I see in logs: [Jul 28 15:49:08] DEBUG[21438] dsp.c: ast_dsp_busydetect detected busy, avgtone: 75, avgsilence 135 [Jul 28 15:49:08] VERBOSE[21438] logger.c: -- Executing [h at macro-dialout-trunk:1] Macro("SIP/2111-b6a400b0", "hangupcall|") in new stack [Jul

Hi all. First thing: I want to thank you all for your help over the past month as I've been learning asterisk. This is one of the more helpful lists. Even when I ask questions that have answers in the wiki ( which I missed because I've been over studying ). Second thing is this: My office is scouting out VoIP solutions, and I have suggested an asterisk solution. We will be

Hi, I am trying to forward calls to another * server with IAX Here is What I want to Do 1- Call SERVER1, let say at 51412345678 2- SERVER1 should transfer the call to SERVER2 in a remote location 3- SERVER2 Receive the call and transfer it to the PSTN number. I have one X100P card on each machine. What is happening is that when the remote party picks up the phone, all he can hear is a weird

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup

Hi, I'm currently running asterisk 1.0.9-r1 and zaptel 1.0.9_p1-r1 (the current gentoo ~x86 versions), with the UK CallerID patches from http://www.lusyn.com/asterisk/patches.html applied. The Zap interface itself seems to work fairly well - although it's a little quiet, there is no echo. Unfortunately, there's also no CallerID. My zapata.conf is as follows: [channels]

Hi, I've purchased two x100p clones, and when I try accessing a line from asterisk with something like this: exten => _1NXXNXXXXXX,1,Dial(Zap/2/{$EXTEN}) (is that only supposed to put you on channel 2 or actually dial the # for you?) but I first hear noise, then a dial tone, but as soon as I start dialing numbers I get feedback and noise, and the call doesn't go through. Any

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

> Just wanted to let you know you were just left a 2236:45 long > message (number 1) in mailbox 1000 from an unknown caller, on Monday, > February 21, 2005 at 05:38:14 AM so you might want to check it when you > get a chance. Thanks! > > --Asterisk Hmmm... Call came in either via a SPA-3000 or an X100P Zaptel FXO interface. Got 2200 minutes of beep-beep-beep-...; the caller