similar to: Kernel Freezes with T100P

Hi Everyone I am considering learning Java. There have been well publicized Java security incidents recently that make me not want to learn it. However it's in Centos and I trust Centos, are the concerns in the media blown out of proportion ? -Patrick

All, I am trying to configure hdlc support on T100P Digium card - everything seems ok... but it just does not work at all. I was able to compile all drivers, the light on the card becomes green when I plug T1 link.... but I even can't ping default router IP... there is no data coming back to me, so I am confused completely now. Also I tried both protocols - raw hdlc and cisco hdlc. The

https://bugs.freedesktop.org/show_bug.cgi?id=39980 Summary: freezing nouveau Product: xorg Version: 7.6 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy: calestyo

Hello, We use all SCSI PCI card hardware RAIDs on all 4 of our production Asterisk servers. They all have Digium quad T1 cards and they all have from 2 to 4 T1s hooked up to them. We have had no noticable problems with dropped calls/poor quality. What are you looking to do with this system? what kind of traffic will be going through these 4 T1s? MATT--- -----Original Message----- From: Deon

I was wondering if someone can shed some light on why vhd files created with qemu-img don''t really work right with vhd-util and consequentially blktap in general. To validate the incompatiblity its simple enough to do qemu-img create -f vpc test.vhd 40g vhd-util snapshot -n child.vhd -p test.vhd Which will show the below and then the headers don''t display the BATMAP summary:

Hello, I contacted Krzysztof Halasa, the maintainer of the current sethdlc code. This is the response he gave me. Of course, I have this working now. Still some minor configuration to do, but It does work, and the connections to the internet are _much_ faster than when I went through the adtran... I would highly recommend to anyone with a fractionated T1, with data and voice channels to

Hello, I have a T100P card on a Red Hat 8 machine with Asterisk installed on it and I'm trying to get the data routing properly through it. I purchased an Integrated Data/Voice T1 Line with channels 1-6 voice and 13-24 data. The line is plugged directly into the Asterisk machine's T100P card. Previous to the asterisk set up we had an Adtran router that connected everything to what the

Dear All, I have these data: exampledata <- c("This is one item", "This is Another One", "And so is This") I would like to find each occurence of a blank space followed by a Capital Letter and replace it by a blank space, a left curly brace, the respective Capital Letter, and then a right curly brace. I thought the following will do: gsub(pattern = "

(to mods: sorry for any extra work I've put you through. Posting from my work account, as proper) Hello all, I'm back. I've got that lucky feeling that this will all work out very soon, and I hope that that is true. The issue: In my * server I have a t100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm

Don & others, Thank you for your answer. The fog maybe lifting ;). The zaptel.conf file has the following in its comments: # # The timing parameter determines the selection of primary, secondary, and # so on sync sources. If this span should be considered a primary sync # source, then give it a value of "1". For a secondary, use "2", and so on. # To not use this as a

I've compiled Asterisk on Redhat 9 and Fedora Core 1 in the past, generally without any problems. Especially w/ the stock kernel, which I generally loathe. When I tried to upgrade my Redhat 9 Server to the 2.4.27 kernel, doing a manual/clean compile, I had massive quality issues. I was forced to go back down to a stock 2.4.24 kernel. Never figured out why. Now, I've installed Gentoo

Hello, Does anybody know of a place to get a half-height PCI slot bracket for the Digium T100P card? I have an application to fit them in 1U cases for small, deployable PBX's. The T100P itself is short enough to fit in a half-height slot but I need an appropriate mounting bracket to screw it into the case. Thanks, Mark Hagler

Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice

To recap: T100P card wouldn't sync with the telco using line side clocking ( span=1,1,0.........) Had to use internal clocking (span=1,0,0.......) zttool showed Tx/Rx Levels as 0/ 1 For the grins of it I replaced the T100P card with another newer card from inventory. This newer card has the same rev on the ASIC / FPGA but doesn't have any of the various jumper headers installed

I'm about to install a second T100P card in my asterisk system, and now I'm wondering how the system determines span-1 vs span-2. Does the position on the PCI bus determine this? TIA Mike

Hello, I have just received Adtran TSU 600 with 24 FXS ports. I have installed sucessfuly T100P card. Adtran is connected to t100p with crossover T1 cable. On T100P card I have a green light and on Adtran I do not get any errors or alarms. But I do not get dialtone on FXS ports. Adtran is configured: For Network Timing, fxs ports ore fxs_ls on Adtran. In zaptel.conf: span=1,1,0,esf,b8zs

my target is to produce a linux router with T100p to Fract T1 24chan to ethernet and TDM 4channel FXO. I have not been able to get nethdlc to work, just get zaptel networking not configured if I set bchan and dchan the card comes to life, but I don't believe this is correct for what I want to accomplish. according to markster@ this is the way they do it. using (multiple distro versions

I have following setup Asterisk - T100P -> Adtran TSU600 P + FXOcard -> PSTN line When PSTN line is plugged directly in to analog X100P caller id is received by Asterisk but when I plug it into adtran I'm not getting caller id. Any ideas what kind of setup Adtran TSU600 requires to pass caller id to T100P ??? regards m.

anyone have a recommendation for a place I can buy cheap motherboards that supports those 64-bit 3.3 volt PCI slots for the T100P ? I can't find them at Fry's or anywhere locally. All I can find online is dual processor server boards that are overkill for this application. I would like to use a P3/ P4/ AMD single processor. No Xeons or dual processor junk. Anyone know why digium

Hi, I'm seeing a problem when calling into my Asterisk server from a T100P with PRI signalling. I'm hoping someone has seen this as well, however, it's a little hard to explain. When I'm navigating through Asterisk on an inbound call from the PSTN, I'm getting a random 'noise' during the playback of sound files. The best way I can describe this noise, is imagining a