similar to: X100P keeping PSTN line Offhook

I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having an annoying issue with the FXO ports. As soon as I plug either one into the phone line it's as though the line is disconnected i.e. get disconnected tone when trying to dial out, line is busy when dialling in. The CLI shows the following: trixbox1*CLI> zap show channel 4 Channel: 4 File Descriptor: 18 Span: 11*

OK... so I'm not sure what I'm looking at. I've had the good old echo problems on my Rev C FXO again this morning, so I thought I'd attempt some debugging, though I'm not sure what I'm looking at. This call has echo. Channel: 2 File Descriptor: 20 Span: 1I> Extension: Dialing: no Context: incoming Caller ID string: "External Call" <99999999> Destroy:

I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a TDM400P with (1) FXO card on port 4. Inbound calls are always successful but outbound calls fail 75% of the time with intercept messages from my dial tone provider that include "we're sorry, your call did not go through", and "we're sorry, when placing a local call it is now necessary to dial an area

I've been having trouble with making outbound calls to my TELCO from a TDM400 card (FXS KS signalling) after upgrading from 1.6-beta9 to 1.6.0. The problem is completely intermittent. When it fails, I get this message: [Nov 9 19:12:26] WARNING[18916] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) At some point, it starts working, but I don't know what

My office is investigating using an Asterisk PBX and also going to a VOIP provider for our main phone connections, but one of the tricky things is that we need to have outbound and inbound modem calls (fax too). I see a lot of talk about faxes but no mention of modems on this list. I get the impression that modems will be a problem for us. Is that true?

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Hi All, I am a new bee to *. I just installed Asterisk@home on FC3. I hv a FXO card. I hv configured two extensions one x-lite and other iaxComm. I configured * using AMP. The following setup works - x-lite (x 200) to iaxComm (x 201) - PSTN to x-lite - PSTN to iaxComm Voice mail, weather etc work fine. When i try to make an external call i am getting message "All routes are busy". In

Hi, We are having a problem with asterisk detecting that an analog ext has been put down. This seems only to happen after a number of calls have been made. We have an FXO port (TDM400P with FXO module) connected to our PBX and are using this to test asterisk prior to rolling our for our small office. What happens is that we make a number of calls to this ext which 1st rings a phone (FXS)

What are the meaning of these Zap show channel output? Caller ID string: Owner: <None> Real: <None> Callwait: <None> Threeway: <None> Confno: -1 Propagated Conference: -1 Real in conference: 0 DSP: no Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: ulaw Fax handled: no Pulse phone: no Echo Cancellation: 0 taps unless TDM bridged, currently OFF Actual Confinfo: Num/0,

I am unable to dial out over a Wildcard TDM400P. This was working previously, so must have messed up the config somehow. I'm running Asterisk 1.6.0.15, with FreePBX 2.5.2.2. When I dial, I see: -- Executing [s at macro-dialout-trunk:19] Dial("DAHDI/1-1", "DAHDI/g0/9239220,300,") in new stack == Everyone is busy/congested at this time (1:0/1/0) It looks like the

Hi all, I wanted to switch from my current setup (mISDN) to the native dahdi with b410p support (wcb4xp). All works fine for normal phone calls but not for faxing. Faxes are distorted, if arriving at all, and hylafax logs the usual bad stuff (HDLC frame not byte-oriented.) Our setup uses a digium b410p card with asterisk 1.6, latest libpri and dahdi, hylafax with iaxmodem, and all this on 1

Thanks Zeeshan, SAngoma told me that the asterisk problem is unrelated to wanpipe drivers, they told me to reinstall asterisk again But, i still having doubts about the problem :( Thanks in advance > > Message: 10 > Date: Thu, 18 Mar 2010 00:21:06 -0400 > From: Zeeshan Zakaria <zishanov at gmail.com> > Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE >

Hopefully someone here can save my sanity. I have been trying to solve this problem for days now, but just cant put my finger on it. Im new to * so I have probably done something stupid! I have a TDM400P with one FXO module and a FXS module. The main problem I have is not being able to get the extension attached to the FXS module to ring or be able to make calls. It gets a dialtone fine but I

Dear All, How can we know the On board supports echo cancellation I have *Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev 02)*board all working fine but sometimes i got echo when user are calling a PRI. is there any way to know on board echo cancellation . regards Dhaval -------------- next part -------------- An HTML attachment was scrubbed... URL:

So, tweaking configs, rebuilding this and that... restarting, twiddling, it works (yeah!), but fails on re-boot to work at all. Consistently, though. I believe it comes down to this: I can call out only *after* I've received a call. So, cold boot. Then: modprobe dahdi modprobe wctc4xxp modprobe wcfxo dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.3

Hello All, I got my TDM04B card installed and configured. Everything works fine I can receive calls and route to appropriate extensions. The only problem I am facing is Slowness. When I dial the PSTN number which is connected to Zap 1-1 after two ring it answers and then run the AGI script. What I did was assign it to a specific extension. So all inbound call on that PSTN number should

Hi, Lately we've noticed that some Zap channels on one of our PRIs are unavailable. We have 2 PRI lines with 60 channels in total. On the first PRI there are currently 20 channels that are not being used for some reason. I tried googling around and found some similar problems but there really was no solution (?). I'm not sure if this problem has occured now because of more load on the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i'm new to * I've installed an hfc-s card (DIGI Micro V) with bristuff 0.0.2; when i try to call outside i get: -- Accepting AUTHENTICATED call from 192.168.1.110, requested format = 1024, actual format = 1024 -- Executing Dial("IAX2[pippo@pippo]/2", "Zap/g1/0123456") in new stack Jul 13 13:42:49

Hi, I'm trying to make a dialup internet connection through my asterisk PBX. When I bipass the Asterisk box, I can get 51600bps. When I run through the asterisk box, I'm limited to about 21600bps. I have a TDM31B card. Any help on speeding these connections up would be good - I was on the understanding that if you bridged the channels, then the call should essentially flow straight

> -----Original Message----- > From: Jacqueline Lee [mailto:jlee@isdomaininc.com] > Sent: Friday, September 23, 2005 11:46 AM > To: asterisk-users@lists.digium.com > Subject: channel offhook state > > > We are using a digium card (TDM400) with asterisk for our access to the > PSTN. Initially when the server starts, all the zap channels on the card > are in the